Chennai, Tamil Nadu, India
Verified
Add Review
Our Product / Services
We offer Resistive Load Banks on rent for you to test the performance of a unit or electrical system under full or partial load. Load Bank is used for alternating current power supply testing, UPS testing, Battery Bank testing, Transformer testing, generator testing, etc. The purpose of a load bank is to accurately mimic the operational or real load that a system will experience in actual application. However, unlike the real load, which is unpredictable and random in value, a load bank provides a contained and controlled load. The load banks are designed to apply a discrete, selectable resistive load to a power source. The load can be applied manually as per requirement.
Various Resistive Load banks (in different configurations) of total capacity up to 1100 KW are available.
A large fleet of Soundproof DG Sets of rating 62.5 KVA to 1000 KVA is available on short / long term rental basis. We have a wide collection of generators for hire, silent dg set, and diesel generator. TWSPL owns more than 25000 KVA (approx.) rental fleet of D.G. Sets of capacity ranging from 40 KVA to 1000 KVA. These DG Sets can be deployed anywhere in the country at a short notice. These DG set on hire and Mobile DG on hire are of supreme quality.
TWSPL also undertakes provision of Metered Power supply through our own DG Sets or by taking over existing DG Sets and operating them including fuel at their optimum levels thereby offering power supply at a competitive unit rate to cooperative group housing societies, commercial complexes, industries, etc. We are renowned for offering timeless services of Generator for rent or Generator on hire, and Silent Gen Set.
Third Wave Services Pvt. Ltd. is engaged in offering Bucket Lift on Rent and Bucket Lift on Hire. The company offers affordable and round-the-clock Bucket Lift Hiring Services throughout India. We have been offering Bucket Lift on Rent for quite a time now and have advanced as the leaders in the industry. Our advanced and functionally sound Bucket Lift on Rent services that we offer ensures different material and man lift handling up to 16 meters & 250kg weight . We offer Bucket Lift on Hire of varying capacities that are capable enough of handling and bearing heavy loads all through the execution of different industrial projects. Also, the operations of these bucket lifts are efficient, smooth and simple. Moreover, under these Bucket Lift Hiring Services, we offer Bucket Lift on Rent of different sizes, models and specifications at affordable rates.
We offer synchronising panels on rent along with our generators as well as a separate unit. Synchronising panels are mainly designed and used to meet flexible and reliable power system requirements and also where site conditions demand higher load taking capacity for a short duration of time like in the case of starting torque of chillers, power press motors, etc. These panels function both manually and with an automatic synchronizing function for two or more generators or breakers.
Our high quality range of DG synchronising panels is available for synchronising two or three generators with combined capacity that reaches 10000 A, and are fabricated using premium quality electrical components including copper bus bar, insulations, wires/cable, PVC channels, transformers, meters and switches.
In electrical maintenance works, in order to cope with safety standards, it becomes necessary to identify de-energized cable intended to work on, out of the bunch of cables, unambiguously prior to its manipulation. Cutting the wrong cable may result in Personnel life threat, complete power supply failure, etc. We easily identify de-energized and energized MV & LV cables electrical cables among multiple conductors, in trenches, manholes, panels, aerial/ underground conversions, etc.
We locate and trace underground power cables as well other types of buried telecommunication utilities unambiguously. We also provide information regarding probable depth at which it is buried. Our Underground cable locator receiver detects 3 active signals (sent by the transmitter) and 2 passive 50/60Hz and radio signals (radiated by utility networks) for the most accurate detection of various utilities.
During pre-commissioning of an electrical installation one may sometimes face a situation where the insulation test shows very low insulation resistance values but do not indicate any fault as such in the cable. Main reason of such faults in cables with plastic insulated outer sheath is the damage of this sheath while transportation or laying. This permits the penetration of water into the cable and as a consequence it enhances the growth of moisture and other corrosion based damages in power cables. Moisture is one of the primary reasons of such cable faults.
A sheath damage in communication cables will result in reduction of the transmission quality which is in today’s high performance data transmission requirements almost equal to a loss of the line.
A sheath damage in a power distribution network, if not associated with a direct damage of the cable insulation, will seldom lead to a fast break down and failure of the cable installation. From the moment of damage until the appearance of the real breakdown, many months or even years can pass.
Cables if not protected from the ingress of water from points of sheath damage can lead to additional danger of cable joint failure due to water spreading though the conductors into the joints.
Testing of integrity of the outer sheath before energising a cable is very important because it provides the possibility of an early elimination of beginning of cable faults.
We provide services for Cable Sheath Testing and Sheath Fault Location & Pinpointing through various highly specialized set of equipmentand experienced personnel in this field.
We locate sheath faults by four different methods i.e. DC Impulse-Method, Surge Impulse Method, Audio Frequency method with direct or capacitive coupling and Audio Frequency Method with 4, 8 Hz and A-Frame. The regular and early testing, detection and location of sheath faults will drastically reduce the amount of faults, especially in medium voltage cables with extruded outer insulation.
We provide services of DC High Voltage (Proof Testing) of HV Cables and Switchgears up to 120 KV. It is done with a state of art continuously variable High Voltage Testing Set (Hipot) capable of producing 0-120 KV DC output voltage. In High Voltage Testing Set (Hipot) a HV Volt meter and a mA analogue meter is provided to note the reading for high voltage applied & leakage current. Voltage & current level can be set by potentiometer. Timer is also fitted to select the time duration of DC test.
The instruments that we have are well protected & has zero volt interlock to safe guard sudden exposure of personals.
The rising demand for electrical energy increases the importance and priorities of uninterrupted services to customers. Thus, faults in power distribution networks have to be quickly detected, located and repaired. We offer Pan India 24 x 7 timely service for underground cables of up to 33 KV working voltage all over India from its nearest located branch. Our wide range of quality services include Underground cable fault location, Hi Pot Testing, Cable route tracing, power cable fault locator, and pipe & cable detector to accomplish the needs of all kinds of industries.
Our state of art, full featured electric cable fault location system tests, pre-locates, and pin-points the precise position of the cable fault within minimum time especially in a long distance range through the powerful Arc reflection method and or Multiple Impulse Method used for pre-location of high resistance faults. Low resistance faults can be located with the TDR only and without having to use high voltage methods.
We have achieved excellence in power cable testing, electrical cable testing, high voltage testing of cables, and to detect LT cable fault, underground cable fault location, underground cable faults, cable fault testing, and cable fault finding. Burning is resorted to only in extreme circumstances. 1000 to 1750 joules of surge energy provide the necessary power for accurately pin pointing cable faults with the acoustic method. HV Test is conducted on cable to cross check the health of cable. With our timeless services, and supreme quality buried cable detector, underground cable fault locator or detector, we have listed our name as the most trusted and renowned suppliers of such services in India.
