Toshniwal Sensors Pvt. Ltd.

Makhupura, Ajmer, Rajasthan

Full multi-input and multi-range performanceuser selectable thermocouple, rtd, v, mv and currentinputsa 250 resistor is required across the input terminal for4-20ma dc.Large 20mm bright displayreadable from a distance and in a low light area40-step programs functionrs232c or rs485 interface availabledust and splash proof front panel equivalent to ip66

Multi-input and multi-range performanceLarge 20mm bright display (SR93)Readable from a distance and in a low light area2-output heating and cooling control availableRS232C or RS485 Interface availableDust and splash proof front panel equivalent to IP66A wide selection of additional functions (optional) isavailable to suit various needs.

High accuracy: (0.25% fs + 1 digit)only sr83 (96 x 96) large 20 mm bright displaymake reading from long distance and low light locationeasier.2-output heating and cooling control available for sr83 (96x 96) and sr84 (48 x 96)auto tuning function for both heating and cooling outputsin a high performance individual expert pid controlboth rs232crs485 and cc-link are communicationinterface ready. (cc-link available only for sr83)dust and splash proof front panel equivalent to ip66a wide selection of additional functions (optional) isavailable to suit various needs.Basic featuresc

Multi-input and multi-range performance Small instrument depths (62mm - 65mm) save space, thus securing a larger installation area. SV setting: 3 points PID Value: 3 types 2-output heating and cooling control available Total 32 steps Program available (optional) (1-4 pattern, 32-8 step) RS-485 Interface available (optional) (Master - slave function, ModbusShimaden Protocol) Heater breakheater loop alarm: Single3-phase available A wide selection of additional functions (optional) is available to suit various needs. BASIC FEATURES approved compliance SRS14 SRS11 SRS13 62 65 62 Depth of the conventional instruments 100mm 1) OUT 1 RA (heating)OUT 2 DA (cooling) action 1) OUT 1 RA (heating)OUT 2 RA (heating) action Output 100% Output 0% Output 100% Output 0% Control output 1 (RA characteristics) Control output 2 (DA characteristics) Control output 1 (RA characteristics) Control output 2 (DA characteristics) DB DB=0 DB Set value (SV) DB (dead band) Set value (SV) DB (dead band) DB DB=0 DB EXAMPLE OF 2-OUTPUT CONTROL BY SELECTING CONTROL OUTPUT 2 SRS11 Series (48 48) SRS 13 Series (9696) SRS14 Series (4896) SMALLER

Basic features multi-input and multi-range performance small instrument depths (62mm - 65mm) save space, thus securing a larger installation area. sv setting: 3 points pid value: 3 types 2-output heating and cooling control available (optional) total 32 steps program available (optional) (1-4 pattern, 32-8 step) rs-485 interface available (optional) (masterslave function, modbusshimada protocol) heater breakheater loop alarm (optional) a wide selection of additional functions (optional) is available to suit various needs. possible to switch off svpv value by key operation parameter mask (non-display) lock (key lock) function

For temperature measurement in the range, -200c to + 850c resistance temperature detector (rtd) is preferred to thermocoupleand other sensors because of its higher accuracy, reliability, compact size and faster response. Rtds find use in almost all industrieslike plastic and rubber processing, food industries, pharmaceuticals, chemical & petrochemical plants, and power plants. It is also usedin diesel engines & ships, process control and laboratories for temperature measurement and control.Rtds are available with single or double resistance elements and in 2, 3 or 4 wire circuits. Various types of protection sheaths forprotection of the element and screw-in threaded bushes either fixed (welded) or adjustable by screws (for non-pressure application)or by compression fitting (for pressure application) for mounting are available. Features:high accuracy and stabilitywide temperature range; -200c to +850cfast response & high insulation resistanceneeds only copper cables for long runs.

We are offering kiln shell scanner.The company cmv systems gmbh & co.kg, germany is world leader in the furnace infrared technology measuring with 3.9 m. At this time we can point out over 100 installations worldwide in incinerators with grates and fluidized beds, rotary kiln and coal fired power plants. Ir-omt is a preventive tool for rotary kiln to avoid failure of bricks and coating etc. Irt kiln-monitor delivers a comprehensive environment for real-time data acquisition, analysis and process control. Irt kiln-monitor is a full featured computer system that allows you to monitor, process and trace data from several kilns at once.The software includes scanners control module for real-time temperature acquisition, inputoutput control module, kiln visualization module (for 2d and 3d), thermography analysis module and historical storage module. Its main feature is that it has no moving part, so it requires low maintenance and has high life span. It provides solution for temperature-hot-spots on the kiln-shell, gives information about defects of the kiln brick lining, low-temperature zones within the brick lining range of the sinter zone permit conclusions on beginning of caking inside the rotary cement kiln.

2-channel controller (basic type: 1-channel controller) independent 2-loop 2-input operation control high accuracy (0.1% fs + 1 digit) high sampling cycle 0.1 sec. High resolution 1 1000 c display achieved *only for r.t.d. Input (scale: 0.00030.000 c) programmable max. 400steps (400 steps x 1 pattern to 20 steps x 20 patterns) auto-tuning pid expert pid max. 10 zone pid control available independent universal-input user friendly operation (menu driven: 4 lines lcd display) easy setting & maintenance via infrared com port on the front panel interface rs-232crs-485 (modbus shimaden) the front dustsplash-proof ip66 universal power supply (100240v ac 10%) sensor power supply