Other Products / Services #688674

Description

ThermoView Pi20 is a rugged thermal imaging camera designed for industrial process control applications. The camera is designed with an IP54 rating. ThermoView Pi20 cameras are offered in two temperature ranges: -40C to 500C (-40F to 932F) and 200C to 2000C (392F to 3632F). For each temperature range, three lens options are available: 21.7 x 16, 30 x 22 or 45.2 x 33.7. ThermoView Pi20 provides easy networking over long distances using the standard Ethernet interface. This interface allows for the PC operating the DataTemp Pi (DTPi) software to be located far away. The Ethernet interface transmits up to 30 frames per second of imaging data and also allows for camera control. For long Ethernet cable runs beyond 90m (300ft), additional fiber optic Ethernet accessories are available.A full complement of hardware accessories includes:

High temperature and outdoor enclosures: To meet specifications for the demanding environments Raytek products are typically installed into, an IP67 (NEMA 4) rated enclosure is available with integrated cooling and air purge options. Integrated Junction Box: Allows I/O modules.

• FEATURES

Description

The pressure transmitter TP2002 is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure.TP2002/3 outputs a 4 to 20 mA DC signal / Profibus corresponding to the measured pressure. The key features include quick response, remote set-up using communications through HART/Profibus, self-diagnostics and optional status output for pressure high/low alarm.

• FEATURES

• World's leading high stability silicon sensor


• 4-20 mA DC output with 0.065% Accuracy, HART/Profibus


• Quick response


• Remote setup usingHART/Profibuscommunication


• Optional Pressure Low/High Alarm


• High Operating Pressure and temperature

• SPECIFICATIONS

Power : 1242V DC Wide supply voltage Range

Ripple < (Us 12V)/Imax kOhm, Imax =23 mA

Load : 230 to 600 ohm

Sensor Body : SS 316L

Isolating Diaphragm : SS316L/Hastelloy C/Tantalum

Housing GasketPerbunanNBR

Fill Fluid : Silicone Oil/Fluorinated Oil

Process Connector Gasket : Perbunan(NBR) /Viton (FKM)

Degrees of Protection:IP67

Ambient temperature : -40 to 85C

Failure Alarm (the mode can be selected)

Low Mode (min): 3.7 mA

High Mode (max): 21 mA

No Mode (hold): Keep the effective value before the fault

Weight1.6 kg

• APPLICATIONS

Description

The differential pressure transmitter TP2001 is suitable to measure liquid, gas, or steam flow as well as liquid level, density and pressure. TP2001 output 4 to 20 mA DC HART signal/Profibus corresponding to the measured differential pressure.Other key features include quick response, remote set-up using communications HART/Profibus, self-diagnostics and optional status output for pressure high/low alarm.

• FEATURES

• World's leading high stability silicon sensor


• 4-20 mA DC output with 0.065% Accuracy, HART/Profibus


• Quick response


• Remote setup using HART/Profibus communication


• Optional Pressure Low/High Alarm


• High Operating Pressure and temperature


• High sensitivity temperature sensor forminimum temperature error

• SPECIFICATIONS

Power : 1242V DC Wide supply voltage Range

Ripple < (Us 12V)/Imax kOhm, Imax =23 mA

Load : 230 to 600 ohm

Sensor Body : SS 316L

Isolating Diaphragm : SS316L/Hastelloy C/Tantalum

Fill Fluid : Silicone Oil/Fluorinated Oil

Process Connector Gasket : Perbunan(NBR) /Viton (FKM)

Housing GasketPerbunanNBR

Degrees of Protection:IP67

Ambient temperature : -40 to 85C

Failure Alarm(the mode can be selected)

Low Mode (min): 3.7 mA

High Mode (max): 21 mA

No Mode (hold): Keep the effective value before the fault

Weight3.3kg

• APPLICATIONS

Description

PT 1200 Series of pressure transmitter features high quality, high stability, small size, low weight, compact structure, low cost, mass production. The product is widely used to measure pressure of the air compressors, auto engines, air conditioning equipment etc.

stainless steel housing are ideal for industrial environment pressure sensing elements are selected from well known international brands.Special circuits are adopted to adjust zero and full range conveniently. The product have been approved with CE, intrinsically safe and explosion proof certificate. Non polar two wire current and three wire voltage output are provided. Products are produced according to military standard of advance design, perfect technology, scientific management, strict production and quality control.

• FEATURES


• +/- 0.5, +/- 1% F.S. Accuracy


• High Stability, High Reliability


• Ceramic Sensor from Germany


• Digital Calibration


• Multiple Connectors & ports


• Zero point can be shifted freely


• Measure range shifted 50-100%


• CE Approved


• RoHS Approved

• SPECIFICATIONS

Description

LTR59 is the instrument of choice for low level belt transfers and querries. It provides accurate measurements under normal temperature and process conditions.

• FEATURES

• Robust design to suit most outdoor applications


• 26 GHz high frequency allows for compact K- band antennas mounted easily in nozzles


• Intelligent signal processing for improved measurement reliability and False-Echo Storage for fixed obstructions


• Integrated Graphical configuration unit for easy onsite adjustments

• SPECIFICATIONS

Power : Standard Version (1636)V DC

2-wire : Intrinsic Safe Version (21.626.4)V DC

Power Consumption max.22.5mA

Ripple Allowed -

Description

MILLCOMis widely used for the efficient operation and increased production of various types of grinding machines; from small ball mills for fine ceramics to huge grinders for cement industry. Maximum grinding efficiency can be automatically maintained by installing ball mills and other mills with microphones (Electronic Ears) for the automatic control of raw material feed rates. In abnormalities, emergency interruption of raw material feeding is possible.

OPERATORS EARS

• Determination of raw material input flow rate


• Detection of abnormal operations

AUTOMATIC CONTROL SYSTEM

• Automatic control of raw material input flow rate


• Automatic detection of abnormal operations


• Operators are required to watch the changes in raw material characteristics at all times, and adjust manually the setting points of controllers

• FEATURES

• Energy Conservation


• High Production


• Less Bear & Tear


• Improved & Stabilized product quaility


• Increase Production

• APPLICATIONS

• Cement Ball Mill


• Raw Ball Mill

Description

Electropneumatic Signal Converter, IT 86 is used for converting direct current signal into standard linear pneumatic signal for process control system applications. IT86 is used for converting control signal 4-20 mA or 0-20 mA etc. coming from Electronic Controllers etc. into a linear 3-15 psi or 0.2-1 kg/cm pneumatic signal for operation of control valves and dampers etc.

• FEATURES

• Proven design, rugged and modular construction


• High performance and accuracy


• IP 54 or IP 65 protection for field mounting


• Protection against explosion hazards


• Split ranges and range change possible at site

• SPECIFICATIONS

• APPLICATIONS

Description

We offer our clients with an excellent array of Flow Indicating Totalizer. These indicators can accept Flow signals from any field mounted Flow meter like an Orifice Plate, Flow Nozzle, Vortex Flow Meter, Electromagnetic Flowmeter, Turbine Flow meter etc.

Available as standalone panel mounted Flow Totalizers or supplied duly mounted in Control panels both Free standing and wall mounted, our Flow Totalizers are widely used in pharmaceutical, chemical, petroleum, food and automobile manufacturing sectors.

• FEATURES

• Analog or pulse input, programmable scale factor


• Non-volatile memory for totalised value and set points


• Isolated Re-transmission output proportional to flow


• Flow/ Batch Alarm Relay/ SSR drive voltage (upto two)


• Temperature & Pressure compensation (optional)


• Communication (RS485/ RS232)/ Printer port


• 24VDC Power supply for 2 wire transmitters (upto 3 ch)


• Self Diagnosis function, EMI/ ESD protection


• Power supply: 85.264 VAC, 50 Hz or 20.32 VDC


• Flame-proof enclosure (Optional)

• SPECIFICATIONS

• Isolated Retransmission output proportional to flow.


• 24 VDC Power supply for 2 wire transmitter


• Communication: Rs485 /RS 232


• Power supply 85-265 VAC or 20-32 VDC

• APPLICATIONS

• In pharmaceutical industries


• In chemical industries


• In petrochemical industries

Description

Laboratory accuracy. Wherever you go.

The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3C) in a rugged, handheld test tool.

Laboratory accuracy. Wherever you go.

The Fluke 50 Series II contact thermometers offer fast response and laboratory accuracy (0.05% + 0.3C) in a rugged, handheld test tool.

Visitor Management System & Attendance Management VMS is used to track the entry, exit and movement of visitors within an organizations premises. By collecting all relevant data information, a visitor management system (VMS) can record the usage of the facilities by specific visitors and provide time stamped reporting and documentation of visitors whereabouts. In sensitive security deployments the system can be used to raise alarms for further action. These systems can go hand-in-hand with access control and video surveillance systems to provide effective security architecture for the area.

Attendance Management System can be used for an efficient management of employees attendance and the data can be used as input for various other software like payroll processing, etc.

Fire is a major cause for destruction of property and life and affects all sectors of our modern economy and society. Fire can be caused due to either human negligence or deliberate sabotage. Fire hazards need to be contained, detected and controlled to safeguard our infrastructure, economy, businesses and enterprises. Rapid response is necessary to prevent a minor fire from turning into a major catastrophe.

Description

The IST-Rees Mini PTZ Mk2 provides a complete inspection system including a sealed, underwater capable, high performance, pan/tilt/zoom color CCD camera. The cameras compact housing provides for cable or pole deployment through small openings whilst its unique slip clutch design allows fail-safe retrieval. The integrated high-intensity white LED lighting provides sufficient illumination for most inspection applications. The integrated microcontroller supports many additional features including position feedback, thermal management and also optional radiation dosimetry when the camera is used in radiation environments. An intelligent controller, available in a rack mounted or robust portable enclosure, provides a convenient user-interface to utilize the systems advanced features.

FEATURES

• High-intensity white LED lighting with independently controllable spot and flood lights


• Continuous pan and +/- 120o tilt, each with variable speed which can automatically reduce as thecamera is zoomed in


• The compact housing allows deployment through openings as small as 65mm diameter (2.56)


• Outstanding viewing performance achieved by using a high performance CCD module with 10:1optical and 4:1 digital variable speed zoom


• Slip clutch for fail-safe retrieval


• Position feedback system to provide for preset positioning and adjustable end stops


• Temperature sensing to provide for temperature alarms and thermal management


• Optional radiation dosimetry


• Sealed housing for in-air and underwater operation


• Optional high power tracking light for underwater use


• S-Video output on rack mounted controller


• Rack mounted controller with remote control capability. Or Optional folding case, portable controller with integrated flat screen monitor

• APPLICATIONS

• Refueling


• Reactor Vessel Inspection


• Fuel handling equipment maintenance


• Fuel Movement


• RV head disassembly/reassembly


• Reactor internals inspection


• Welding Applications


• Corrosion Evaluation


• Robotics and remote tooling


• Control rod drive mechanism inspection

Description

The IST-Quadtek Spyrometer3, with its patented combination of a color video camera and a scanning pyrometer, gives the operator the ability to see process conditions while measuring the temperature of virtually any area in the field of view. The M555 imaging pyrometer takes the video image and the temperature information, multiplexes it and sends it, via coaxial cable, to the image processor in the control room and displays it on a VGA monitor. On-screen temperature measurement data is also accessible through 4-20mA outputs which can easily be interfaced to yourcontrol system.

• FEATURES

• M555 Imaging Pyrometer Camera is used for industrial processes where video and temperature information are both essential


• It is available in two options. It measures higher temperatures from 848-1816C (1558-3301F) and lower temperature from environments of 663C-1255C (1225F-2291F)


• Ability to see process conditions while measuring the temperature of virtually any area inthe field of view


• The imaging pyrometer takes the video image and the temperature information, and sends it, via a single coaxial cable, and displays it on a VGA Monitor


• On-screen temperature measurement data is also accessible through 4-20mA outputs whichcan easily be interfaced to your control system


• Useful in Rotary Kilns, Clinker Coolers, Fossil Utility Boilers, Steel Reheat Furnaces

• SPECIFICATIONS

• APPLICATIONS

• Rotary Kilns:Monitor cement and lime kiln product and temperatures. See potential kiln upsets early. Interface temperatures to your DCS


• Glass:View for flame impingement and product flow. Accurately measure refractory temperatures


• Fossil Utility Boilers:Observe flame shape and temperature of each burner. Assign a temperature cursor to each flame to aid in controlling NOx levels


• Steel Reheat Furnaces:See areas of non-uniform heating and adjust product speed or combustion accordingly. Position temperature cursors to accommodate size and shape of the load


• Cement Clinker Coolers:Monitor the cooler for red rivers and upset conditions. Optimize cooling patterns by measuring clinker temperature on the first grate. Aids in reducing equipment breakdown and refractory degradation. Obtain continuous visual of clinker depth and reaction to grate speed changes.


• Copper Casting Wheels:Optimize metal flow to the casting mold while monitoring from the control room. Measure temperature of metal in casting spoons

Description

Powitec's PiT Indicator is a sophisticated tool for an online analysis of process conditions at rotary kilns for clinker production. The PiT Indicator enables the operator to immediately identify and react to changing process conditions in order to stabilise and smoothen the production, also in dusty or dark kiln atmospheres. Main target of the PiT Indicator is to balance optimal clinker quality at various fuel mixtures. With Powitec's PiT Indicator the operator is able to adjust the actually required fuel consumption.The PiT Indicator comprises two modules for process visualisation and online analysis:

Thermography module:The thermography reflects the temperature distribution in the bed flow field, includingvarious special features like the 'Polyline'. Analogue outputs of temperatures can be usedas pyrometer signals

Prediction module (soft sensor): The prediction module offers the kiln operator a permanent online prediction of key parameters (e.g. free lime content, litre weight of clinker or NOX emission)

• FEATURES

• Chronological Flame Variation Display = Active Flame Management


• Reduction of Temperature Variation = Refractory Protection


• Reduced burner Adjustment Time = Faster Burner Commissioning


• Quick adaption to changing fuel properties = Increase of alternative fuels


• Best Temperature Analysis = Each pixel is a pyrometer


• Upgrade Possibility = base module for PiT Navigator and PiT Predictor


• RGB Camera Technology = High Resolution temperature analysis


• AEDF Adaptive Electronic Dust Filter = Clear pictures even for dust loaded kilns


• Robust German Design = Low maintenance


• Regions of Interest & Polylines = Information from decisive zones


• Interface to DCS = Correlation of DCS signals with visual flame variations

• SPECIFICATIONS

• It Having Video Graphic Capability


• It consist of three chip camera


• It is having retraction unit which consist of air & Water Cooling System

• APPLICATIONS


• Cement Rotary Kiln

Description

Powitech Pridicator is a software model which predict following parameter of cement process:

• Free Lime Content


• Percentange of Nox


• Perceentage Sox

• FEATURES

It is software address following process factors

• Quality of Clinker


• Environmental Issues


• Energy Conservation

• APPLICATIONS

Listen beyond the noise of your plant. Pinpoint compressed air leaks through miles of twisting air lines with laser point accuracy. Quickly inspect hundreds of steam traps sorting good from bad. Confidently re-lubricate motor bearings with digital accuracy. Let the SDT200 chart a course for less energy waste, more efficient processes, and a greener environment.
SDT puts its 35 years of ultrasound know-how into the SDT200. The company has a long standing reputation for designing high-end ultrasound measurement solutions for Predictive Maintenance, Reliability, and Condition Based Monitoring professionals. With a presence in more than 50 countries many consider SDT to be the global leader in ultrasound instrument design.
Bolster your energy conservation programme today with the SDT200. Choose from the base kit or one of our customized application driven kits.

• FEATURES

• Built in ultrasound sensor


• Built in temperature sensor with a laser pointer for pinpoint accuracy


• Wide range of available airborne and contact sensors


• Digital measurement display (dBuv)


• Intuitive navigation with icon based menu


• 4 condition indicators allow more ways to interpret data


• Predefined node tree with 4000 measurements points


• DataDump Software transfers data to PC

Application

• Leak detection


• Bearing monitoring


• Steam traps, pump and valve inspection


• Acoustic lubrication


• Electrical inspection


• Hydraulic systems inspection


• Tightness testing

Description

The speed relay is a magnetic type motion sensor specifically designed to detect the speed of a rotating shaft in machinary.

If an overload causes a shaft speed to decrease abnormally, or to increase dangerously, the Speed Relay will immediately output an alarm signal to prevent problems.

• FEATURES

• No power supply is required

The speed relay is actuated when the setting speed is mechanically detected

• No maintainanceis required

The speed relay can be operated continously over a long period without lubrication or inspection

• Superior durability is secured by its rigid structure

More then 45, 000 installation show that the speed relay is high-quality and field-proven

• APPLICATIONS

Description

"RevMonitor" is the SpeedSwitchcan automatically record the current revolution speed by simply pressing the MOD button.
If the speed drops 5-10% from the recorded speed, "RevMonitor"will output an alarm signal.
"RevMonitor" is applicable for a wide variety of application such as the detection of adnomal revolition of transfer conveyor of food production line, kneading machine, mixer etc.and chain breakage of bucket conveyor.
Easy installation and no complicated setting required.

• FEATURES

Description

4-20 mA Loop Analyser, IT52.51 is a versatile portable instrument for rapid checking & simulation of 2 wire Transmitters and checking Indicators, Controllers, Recorders, Current alarms, Data Loggers, Final control elements & Computers etc. operating on 4-20 mA DC input/output.

IT52.51 with its built-in power source and LCD display has four modes of operation, viz. Normal Source, 2-wire Transmitter Simulation, Normal Read and 2-wire Transmitter Read.

Normal Source mode provides 4-20 mA DC output. 2-wire Transmitter Simulation mode modulates external power to pass 4-20 mA in the external loop. In these two modes, "QUICK CHECK" switch provides instant 4 mA & 20 mA output; for rapid check of zero & span end points. "QUICK CHECK" switch also has an intermediate Dial position; selection of this position allows precise intermediate settings between 4-19.99 mA on 10 turn potentiometer operated by a separate knob. Normal Read mode measures input currents fed to the Analyser. 2-wire Transmitter Read mode supplies 27 Volts in series with the internal measuring circuit at the output terminals and measures 2-wire Transmitter output, thus eliminating need of external power supply.

• FEATURES

• Tests/ calibrates instruments operating on 4-20 mA DC signal


• Multifunction capability: Sources 4-20 mA; Reads 0-20 mA; Simulates 2-wireTransmitter and powers 2 Wire Transmitter and measures its mA output in the range 4-20 mA


• High accuracy : 0.1% FSD - Bench top accuracy in a Tool Box Calibrator


• Instant check of 4 mA & 20 mA end points; and also fast check of any intermediate point in both Source & 2-wire Transmitter simulate mode


• Circuit design ensures stability of set current regardless of changes in voltage and load


• Large clear 3 digit LCD, 0.5" high


• Portable, rugged and dry cell powered - Ideal for use in field & control room

APPLICATIONS

• 
  
  
  

  Used for rapid checking & simulation of 2 wire transmitters and checking Indicators, Controllers, Recorders, Current alarms, Data Loggers, Final control elements & computers etc.

  
  
  
  

Pluse level radar meter

Description

The 26GHz pulse redar type microwave level meter is designed specitically for medium/ long range measurement of all kinds of power, particle and bulk solids.
The compact and high directional system with usage of higher frequency can reazlize the more stable level measurement. Adjustments can be done by entering simple parameters.

The air purge function is normally integrated and there are many options such as angle adjustment for wider range of installation environments.

• FEATURES


• Long Range 70m


• Two Wire Hart Communication


• Compact & Light Weight


• APPLICATIONS

• Cement Silo


• Clinker Silo


• Fly ash Silo


• Chemical Tank


• Incinerator


• Silos


• Tank with Gaseous Materials


• Water Level of River

Description

The instrument consists of a taut suspension movement, light source, projection system, scale and sensitivity control switch. All components of the instrument are housed in a dust free aluminium cabinet nicely finished by stoving enamel paint.

The light source consisting of a 4V 4W lamp is mounted on a small rectangular detachable plate fixed in front of the galvanometer housing to allow the bulb to be replaced. A circular plate is fixed on this rectangular plate which enables the exact adjustment of light spot. The Galvanometer indicator consists of a bright circular spot of light with a vertical hair line shadow on a translucent scale with dual graduations in millimeters (0.14 & 7.0.7 cms).

Two models are available for different purposes:

• Voltage sensitive model Cat. No. PL64- In this model the coil resistance is low and it is useful for measurement of low resistances.


• Current sensitive model Cat No PL64.01- In this model the coil resistance is high and it is useful where high resistances are measured.

• FEATURES

• High sensitivity (70 mm/ A)


• Five sensitivity positions


• Built-in universal shunt


• Constant terminal resistance

• SPECIFICATIONS

Description

Sounding V is a compact type level meter which is produced to pursue low price and smaller size, however, completely includes the control circuit in the main body and is possible to make measurement by manual switch, auto-measurement by built-in timer and signal output according to the level setting.By the Sounding V, continuous level measurement is possible with the cost equivalent to a few units of point level equipment, and it is suited to storage management for various kinds of powder such as grain, feed, etc.

• SPECIFICATIONS

Description

Dust Monitor continuously measures for 24 h the dust in exhaust gas at the secondary side of a dust collector or the like and outputs the alarm signal at the abnormal condition and monitors the relative variation of dust amount with an analog signal. It detects the triboelectric charge of dust hitting the sensor probe and make outputs relative to the dust amount. Dust Monitor can be easily mounted on the existing facility to facilitate environmental management.

• FEATURES

• Produces the same high performance as optical systems at lower cost.


• Requires no special training or skill easy to install and to adjust.


• All components are made in Japan for ensured high quality and excellent customer service.

• APPLICATIONS

Cement Factory

• For coal ash and other raw materials.


• For cement and concrete products.


• For Kiln, AOC (Air quality control) system and other equipment.


• For slug and fil ash.

Ironworks

• For Steel sintering.


• For Casting.


• For coke ovens.


• For recycling related facilities such as those for waste disposal of plastics.

Chemical Factories

• For catalyzation.


• For smoke removal.

Automobile Factories

• For casting.

Waste incineration plants

• For measuring the enviorment.


• For incinerators.


• For fusion furnace.


• For high temperature incinerators used to cut emission such as dioxins.

Rubber and Carbon Factories

• For monitoring of dust accumulation in ducts.


• For Handling raw materials.

Fertilizer Plant

• For preventing mixing of fertilizer.

Spice and Paint Factories

• For traceability related equipment.

Gas Extraction Equipment for Boilers

• For generators

• APPLICATIONS

Cement Factory

• For coal ash and other raw materials.


• For cement and concrete products.


• For Kiln, AOC (Air quality control) system and other equipment.


• For slug and fil ash.

Ironworks

• For Steel sintering.


• For Casting.


• For coke ovens.


• For recycling related facilities such as those for waste disposal of plastics.

Chemical Factories

• For catalyzation.


• For smoke removal.

Automobile Factories

• For casting.

Waste incineration plants

• For measuring the enviorment.


• For incinerators.


• For fusion furnace.


• For high temperature incinerators used to cut emission such as dioxins.

Rubber and Carbon Factories

• For monitoring of dust accumulation in ducts.


• For Handling raw materials.

Fertilizer Plant

• For preventing mixing of fertilizer.

Spice and Paint Factories

• For traceability related equipment.

Gas Extraction Equipment for Boilers

• For generators

Belt Tear Detector immediately detects conveyor belt tear accident caused by foreign substance piercing the conveyor belt at the outlet of chute of conveyor, in order to stop the belt conveyor. Belt Tear Detector consists of sensor to detect the belt tear accident and transducer to output breakage signal. Belt Tear Detector is high safety sensor since the transducer is equipped with wire-breakage alarm output to detect the breakage of cable of sensor. Sensors are installed according to the number of Impact Rollers. Since the wiring is loop connection between sensors and to transducer, it is possible to save the wiring cost.

• FEATURES

• Instant detection of conveyor belt logitudinal tears.


• Keep High operating sensitivity.


• Easy Installation

• APPLICATIONS

"PULLSTOP" is the switch to stop the long transportation line such as convey by puling the wire rope. It can also detect loosening and breakage of the wire rope.
The Detector has the emergency stop push button as standard and can easily stop the mechanikal equipment without pulling the wire rope.
"PULLSTOP" is complied with European Norm, ISO Standards and JIS Safety Standaeds.

• FEATURES

• High Reliability in compliance with European and International Safety Standard.


• Operational even in adverse enviorments.


• Meets Diverse Safety requirement.

• APPLICATIONS