Bimaks Kimya Ve Gida Dis Tic. Ltd. Sti.

composition hydrocarbon structured anti foam agent appearance yellowish amber liquid ionic type nonionic solubility soluble in every proportion. concentration %99 ± 1 properties maks antifoam sf-73 a hydrocarbon based antifoam agent. it is used in textile, acrylic, paper industry, and the systems which contain polyvinyl acetate dispersions. maks antifoam sf-73 is used in textile, petrochemical, paper pulp etc. both to prevent foam formation and destroy the existing foam. also has an anti-creasing effect. maks antifoam sf-73 is silicone free can be used even in rapid jet type of machines. application the application amount is determined according to the foam formation of other chemicals. exhausting process : 0.30 - 1.0 g/l foulard : 5.00 - 10 g/l warning: stir well before usage. the application amount is determined according to the foam formation of other chemicals. exhausting process : 0.30 - 1.0 g/l foulard : 5.00 - 10 g/l warning: stir well before usage. shelf life storing in a cool and dry warehouse is recommended. the product must be protected from frost. temperature of the product must be approximately at room temperature before usage. the shelf life of the product is 12 months under specified conditions. packaging 60 kg of plastic drums or 200 kg barrels.

composition combination of surface active agents and silicone. appearance white liquid. ionic type nonionic solubility soluble in every proportion. ph (10 % solution) 5.0-5.5 properties - prevents forming of foam, facilitates removing of air bubbles in the bath. - provides uniform effecting of dyestuffs and other chemicals, auxiliaries. - suitable for all kind of materials. - can be used at high temperatures. application 323 daf is used in desizing, washing, bleaching, dyeing and finishing processes. recommended amount is 0.1-0.4 gr/lt. shelf life 12 months in closed containers. packaging 60 kg in plastic drums or 200 kg barrels.

We offer Antistatic Lubricant. Composition mixture of antistatic agents, lubricants, and special emulsifiers. appearance red-brown, transparent liquid. ionic type nonionic solubility soluble in water at every proportion. stability excellent in hard waters, but hydrolyses in strong acids and alkaline solutions. properties - to be used in blends and tops of synthetics and wool blends to prevent the formation of static electricity. - does not contain mineral oil. - does not cause yellowing. -does not yield corrosion and unpleasant smell. application 0, 25 - 0, 35 % w/w shelf life 1 year in closed containers. packaging 120 kg in plastic drums or 200 kg barrels.

We offer Polypropylene Yarn. Composition mixture of antistatic agents, lubricants, and special emulsifiers. appearance white- light yellowish, transparent, viscous liquid. ionic type nonionic solubility soluble in every proportion, resistant to hard water. properties -used in the production of continuous and staple polypropylene yarns. -reduces fiber-metal and ceramic-fiber friction and reduces yarn breakage. -enhances the distribution of oil on the fiber. -causes no deposits, no flees and reduces the dusting effect. -maksstat pp 85 has good antistatic properties. -does not contain mineral oil. -does not give unpleasant odors and does not cause color detoriation . -does not cause corrosion. application 1- maksstat pp 85 is used in the production of polypropylene cf and bcf yarns. 2- efficient in the high speed pp spinning process. - maksstat pp 85 should be used without dilution. - recommended concentration: % 0.8-1.2 w/w - oil pick up% should be checked on the yarn. 3- in the preparation stage; it is advised to prepare 15-20% w/w emulsions with soft or demineralized water better bactericide should also be added at 0.1% w/w. shelf life 1 year in closed containers. packaging 120 kg in plastic drums or 1 ton ibc .

We offer Cationic Softener. Composition condensation product of fatty acids and polyamine. appearance cream colored liquid ionic type cationic ph(10%solution) 4.0 - 4.5 solubility easily disperses in hot water. stability stable in diluted acids, hard water and electrolytes, unstable in alkaline. properties - very effective cationic softener for all kinds of synthetics but especially for acrylics. - gives soft, full and slippery handle. - provides antistatic effect. application finishing process should be applied at 40-450c at ph:4-5 for 20-30 minutes. exhausting method application: cotton : 2-3 % w/w acrylics : 1, 5-2, 5 % w/w synthetic/wool : 2, 5-3 % w/w padding application : 20-30 g/l w/w shelf life 1 year in covered places packaging 60 kg in plastic drums.

We offer Nonionic Softener. Composition fatty acid ester. appearance pale yellow, viscous liquid. ionic type nonionic solubility stable emulsions in warm water properties - very effective softener for all type of fibers. - provides excellent softness together with some antistatic properties. - causes no yellowing. - can be used together with cationic and nonionic softeners. - low foaming application - batch process: 1-3% - flouard: 20-30 g/lt - dyeing bath: 0, 5-1 gr/lt storage 6 months in closed containers. packaging 60 kg of plastic drums.

We offer Nonionic Softener Flake. Composition fatty oil polyamine condensation product appearance white flakes ionic type nonionic solubility dissolves in warm water. Gives stable emulsion when dispersed. ph (10 % sol.) 6.5 - 7.0 stability stable in hard water, electrolytes and weak acid solutions. properties -to be used for softening of all kinds of natural and synthetic fibers and their mixtures. -provides slippery hand touch and excellent softness. -low foaming. -does not cause yellowing. -can be used together with cationics and nonionics. application in order to prepare 100 kgs of solution, take 80 kgs of hot water and add 20 kg of makssoft nhs conc, stir up frequently for ½ hour. Use this solution as; -in exhaust method, adjust the ph of the bath to 4.5-5.5 and add makssoft nhs for 20-30 minutes at 40-500c.if optical brighteners are used, bath has to be drained (clear out) and makssoft nhs conc solution reprepared. amount to be used in exhaust method : % 2-3g/l (depending on material’s weight) floured method: 10-30 gr/lt. storage should be kept in dry and cool temperature. Product life is 1 year in closed containers. packaging 20 kgs corrugated boxes or 25 kg plastic two layer bags

We offer Cationic Flake Softener. Composition fatty oil polyamine condensation product appearance white flakes ionic type cationic solubility dissolves in water at 500c. ph (10 % sol.) 4.5 - 5.5 stability stable in hard water, electrolytes and weak acid solutions. properties -to be used for the softening of all kinds of natural and synthetic fibers and their mixtures. -provides slippery hand and antistatic properties to the fabric besides the excellent softness. -causes no yellowing. -can be used together with cationics and nonionics. application in order to prepare 100 kgs of solution, take 80 kgs of hot water and convert ph to 4.5-5.5 and add 20 kg of makssoft ks conz, stir up often for approximately ½ hour. Use this solution in the softening process. exhaust method: % 2 - 3 w/w depending on material’s weight. padding : 10 - 30 gr/lt in exhaust method, adjust the ph of the bath to 4.5-5.5 and apply makssoft ks for 20-30 minutes at 40-500c. storage 1 year in closed containers. packaging in 20 kgs corrugated boxes.

We offer Anti Peroxide Enzyme. Composition catalyzers appearance brown, viscous liquid. ph 5.0 - 6.0 solubility soluble at every proportion in water. properties - decomposes the hydrogen peroxide to water and oxygen at 35 - 600 c and at ph 5.0 - 7.5. - prevents uneven dyeing. - creates economy in the electrical energy , time and water used. - completely biodegradable, not harmful to the environment. application after the bleaching process, the dyeing bath is prepared. The ph is adjusted to 5.0 -7.5 and the temperature is adjusted to 35-400c. 0.1-0.5 g/lt superkill is added and treated for about 20 minutes. If the time can be longer, the amount of superkill used may be less. This process continues until all the hydrogen peroxide is consumed and then the dyeing process starts. shelf life 6 months in closed containers. Must not be exposed to high temperatures and freezing. packaging 120 kg in plastic drums or 1 ton ibc .

We offer Desizing Enzyme. Composition high activity, alfa-amylase natural enzyme produced by fermentation process. appearance brown, liquid. ph 6.5 - 7.5 solubility product is miscible with water in all proportions. properties makslase a-1001 ensures a rapid and complete degradation of starch into water solution. Makslase a -1001 works best at 30 - 70°c and ph 6, 5 - 7, 5. It can be applied with hard water. Reacts only with starch without damaging the textile fibre. It is suitable for application with all kinds of starch and starch derivates. It is not recommended to use with anionic or cationic chemicals. Prepares the material for the coming processes (stone-wash, dyeing etc.). Removes the size on the fabrics and garments in an effective and economic way. Gives no harm to fabric due to its selectivity towards starch. Is compatible with continuous and batch systems. Is a completely degradable product. Gives excellent results even in hard water. Makslase a-1001 does not cause foaming. application optimum enzyme amount and usage conditions are dependent on size composition, fabric type and the equipment used. The usage of wetting agent makswet tr cons improves the effect of enzyme performance. Provides enzyme material and time savings. 1- bath water is drawn. The temperature of the bath should be set to required value. 2- ph value should be between 6.5-7.5. 3- when makslase a-1001 is added the desizing process starts. Wetting agent can be given at the beginning or together with the enzyme. makslase a-1001 is used for desizing processes up to 75 °c. Process makslase a-1001 process timing: exhaustion 0.03 - 0.05% 10 - 30 min. pad-batch 0.7 - 1.5g/l 8 - 12 hour shelf life makslase a-1001 should be kept away from high temperature and should be stored in cool places like all the other enzymes. It should not be kept under conditions which would lead it to freeze. It can be stored in its original closed package at 25 °c for 3 months and at 4°c for 12 months. It should not be kept at temperatures over 30 °c. It should be mixed before usage. packaging 30kg , 120 kg in plastic drums or 1 ton ibc .

We offer Formaldehyde Free Dye. Composition polymer ingredients appearance pale yellow, transparent liquid. ionic type cationic solubility soluble in water, stable to hard water. properties -improves the wet-rubbing fastness of fabrics dyed with reactive dyestuffs. -can be used in exhausting and padding processes. -provides high uv resistance - is stable at high chlorine concentration -effective at broad ph range. application before use, the anionic materials should be completely removed. Rinsing bath temperature should be adjusted to 25-300c and the ph 5-7, the application time is 15-20 minutes. for light shades: 0, 25-0, 50 % for medium shades: 0, 50-1, 0 % for dark shades: 1, 0-2, 0 % shelf life 1 year in normal covered, cool and dry places. packaging 120 kg in plastic drums or 1 ton ibc .

We offer boiler treatment. PRODUCT BENEFITS:- - Complete program (boiler & condensate lines) for medium and low-pressure boilers with hardness up to 25 ppm. - Prevents tube failures by avoiding deposits. - Cleans and dissolves the existing deposits resulting fuel savings - Helps producing better quality steam by preventing foaming. - Supports internal metal passivation in feedwater and boiler system. - Multifunctional properties, acts also as fast oxygen scavenger. - Contains only FDA approved ingredients. PRINCIPAL USES MAKS 1550 is designed to assure a high level of cleanliness in the boiler system, especially on the heat transfer surfaces, together with a complete corrosion inhibiting action. The product supports internal metal passivation. MAKS 1550 can be applied in low pressure boiler systems without deaerator and on softened feedwater make-up with a total feedwater hardness of up to 25 ppm. By providing clean heat transfer surfaces MAKS 1550 saves energy and reduces cleaning and maintenance costs. MAKS 1550 is not volatile and is in compliance with FDA and USDA regulations. Suggested maximum use pressure for MAKS 1550 is 40 bar. DOSAGE MAKS 1550 dosage will vary as a function of feedwater quality and pressure. The average dosage rate is 30-60 ppm to boiler feedwater. Your BIMAKS representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters. To control the performance of MAKS 1550 treatment, a suitable analytical procedure as well as a simple test-kit is available. FEEDING MAKS 1550 is preferably applied neat via a stainless steel quill into the deaerator or the feedwater line. However, where dilution is required, softened water, condensate (

We offer reverse osmosis antiscalant. product benefits:- -highly effective antiscalant across a broad spectrum of waters -suitable for ro (reverse osmosis) & nf (nano filtration) membranes -inhibits common scales (calcium carbonate/sulphate, calcium phosphate, barium/strontium sulphate, silica, iron/manganese) -proven to be effective at lsi up to + 3.0 -excellent inhibitor for iron fouling -excellent silica antiscalant -will reduce, and usually replace the need for acid addition -compatible with all types of polyamide membranes -comply with nsf regulations up to 25 ppm. dosage the bimaks computer package will define the optimum chemical requirement for any given water quality. In calculating dosage rates, membrane manufacturer’s limits, product capability, operating parameters and feed water quality are all considered. All calculations are made on the concentrated reject brine and utilize the predicted langelier saturation index, or the stiff and davis index where seawater and high salinity water is in use. Calcium, barium and strontium sulfate solubility’s are also calculated as is the dose of maks 401. Your bimaks representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters. feeding maks 401 needs to be fed continuously to the feed water. Maks 401 can be diluted and is fully miscible with water in all proportions typical dosage rates are 2-10 ppm. materials: storage tanks, piping and feeding equipment for maks 401 should be constructed of pe, pvc, ptfe or stainless steel. Direct contact of the neat product should be avoided with aluminum, brass, carbon steel and nickel. handling - storage - shipping as a standard precaution with all chemicals we recommend the use of protective equipment such as goggles and rubber gloves when handling. Consult the product material safety data sheet as the only official source of environmental and safety information. the product can be stored for more than 12 months from date of shipping if kept in its original unopened containers and under normal warehouse conditions. Protect from freezing and from exposure to high temperature. Maks 401 is available in non-returnable 25 kg pails or containers of different sizes.

We offer reverse osmosis antiscalant. Product benefits:- -highly effective antiscalant across a broad spectrum of waters -suitable for ro (reverse osmosis) & nf (nano filtration) membranes -inhibits common scales (calcium carbonate/sulphate, calcium phosphate, barium/strontium sulphate, silica, iron/manganese) -proven to be effective at lsi up to + 3.0 -excellent inhibitor for high salinity and seawater applications -excellent inhibitor for iron & manganese fouling -excellent silica antiscalant -will reduce, and usually replace the need for acid addition -compatible with all types of polyamide membranes -comply with nsf regulations up to 25 ppm. dosage the bimaks computer package will define the optimum chemical requirement for any given water quality. In calculating dosage rates, membrane manufacturer’s limits, product capability, operating parameters and feed water quality are all considered. All calculations are made on the concentrated reject brine and utilize the predicted langelier saturation index, or the stiff and davis index where seawater and high salinity water is in use. Calcium, barium and strontium sulfate solubility’s are also calculated as is the dose of maks 426. Your bimaks representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters. feeding maks 426 needs to be fed continuously to the feed water. Maks 426 can be diluted and is fully miscible with water in all proportions typical dosage rates are 1-3 ppm. materials: storage tanks, piping and feeding equipment for maks 426 should be constructed of pe, pvc, ptfe or stainless steel. Direct contact of the neat product should be avoided with aluminum, brass, carbon steel and nickel. handling - storage - shipping as a standard precaution with all chemicals we recommend the use of protective equipment such as goggles and rubber gloves when handling. Consult the product material safety data sheet as the only official source of environmental and safety information. the product can be stored for more than 12 months from date of shipping if kept in its original unopened containers and under normal warehouse conditions. Protect from freezing and from exposure to high temperature. maks 426 is available in non-returnable 25 kg pails or containers of different sizes.

We offer reverse osmosis antiscalant. Product benefits:- - broad spectrum of activity - readily biodegradable and easily deactivated to harmless by-products - non-foaming - compatible with most membrane types. principal uses maks 473 is a biocontrol agent for use in membranes and pre-treatment plant. It has a broad spectrum of activity and application on a routine basis will prevent the growth of biofilms on membrane surfaces, filter media and pipe-work. Maks 473 may also be used as a storage preservative for certain types of membranes. dosage the dosage of maks 473 very much depends on the severity of biofouling and the type of application. Specific cleaning procedures for fouled membranes are available. cleaning fouled membranes: a 0.1 - 0.2% w/w solution of maks 473 should alternately be soaked and circulated through the membrane system for 5 - 6 hours. prevention of microbial fouling: for non-potable water applications maks 473 can be used to prevent biofilm formation. It should be applied continuously to the feed water for 4 - 6 hours/day. The frequency of addition will depend on the degree of biofouling. membrane storage: maks 473 is suitable for the long-term storage of membranes. The treatment level is dependent on the expected storage life. your bimaks representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters. feeding maks 473 is either continuously or slug-fed, depending on it’s application. materials: storage and application equipment (pumps, lines) should be made of stainless steel (304, 316), aluminium, brass, carbon steel, neoprene, nickel, pu or plasite 7122. Do not use edpm or plasite 4005 in contact with the neat product. handling - storage - shipping as a standard precaution with all chemicals we recommend the use of protective equipment such as goggles and rubber gloves when handling. Consult the material safety data sheet as the only official source of environmental and safety information. the product can be stored for at least 12 months from date of shipping if kept in its original, unopened container and under normal warehouse conditions. Protect from freezing and from exposure to high temperature. maks 473 is available in non-returnable containers of different sizes.

We offer reverse osmosis membrane cleaner. Product benefits:- -effective alkaline cleaner, for removing acid insoluble deposits from membranes -liquid product for ease of application -high level of active substance -wide range of application principal uses maks 482 is a membrane cleaner developed to support the cleaning of acid insoluble sulfates of calcium, barium and strontium, as well as calcium fluoride. Maks 482 is also effective in removing iron oxides and hydroxides as well as calcium carbonate. Maks 482 is highly effective when used in combination with high ph detergent cleaners such as maks 485 to help remove organic substances and microbial slimes. dosage the dosage of maks 482 very much depends on the severity of fouling and the type of cleaning applied. Specific cleaning procedures for fouled membranes are available. your bimaks representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters. feeding maks 482 should always be used as recommended by the membrane manufacturer in respect to temperature and ph, as compatibility with all membrane types should not be assumed. materials: storage tanks, piping and feeding equipment for maks 482 should be constructed of pe, epdm, pp, pvc, ptfe, hypalon, vinyl, viton, neoprene, nickel, pu, buna-n, stainless steel 304 or 316. Direct contact of the neat product should be avoided with aluminum, brass, carbon steel, plasite 7122, 4005 and 6000. handling - storage - shipping as a standard precaution with all chemicals we recommend the use of protective equipment such as goggles and rubber gloves when handling. Consult the product material safety data sheet as the only official source of environmental and safety information. the product can be stored for more than 12 months from date of shipping if kept in its original unopened containers and under normal warehouse conditions. Protect from freezing and from exposure to high temperature. Maks 482 is available in non-returnable containers of different sizes.

We are offering maks 2210 closed cooling treatment. Product benefits - prevents corrosion, scale and fouling deposition in open recirculating cooling water systems - is effective in protecting mild steel and copper alloy surfaces - controls scale formation under alkaline ph conditions while reducing need for acid - keeps suspended matter dispersed and maintains clean transfer surfaces. principal uses maks 2210 is a powerful antiscale resistant to time, temperature and ph fluctuation, preventing mineral scale in recirculating cooling water systems. Maks 2210 as corrosion inhibitor acts forming a protective film on metal surfaces of carbon steel, admiralty or other copper alloys, so preventing pitting and general attack. Dosage the specific dosage of maks 2210 will vary depending upon the operating characteristics of your system, the water chemistry, and the severity of problems encountered. Your bimaks representative will recommend the optimum dosage necessary to ensure maximum program performance according to your specific system parameters. feeding maks 2210 should be fed neat to a location in the system where it will be uniformly mixed and thoroughly distributed. Materials: storage and application equipment (pumps, lines) should be made of pvc, pp, pe, plexiglas, teflon, hypalon, penton or viton. Do not use carbon steel or stainless steel in contact with the neat product. Handling - storage - shipping as a standard precaution with all chemicals we recommend the use of protective equipment such as goggles and rubber gloves when handling. Consult the material safety data sheet as the only official source of environmental and safety information. the product can be stored for at least 36 months from date of shipping if kept in its original, unopened container and under normal warehouse conditions. Protect from freezing and from exposure to high temperature. Maks 2210 is available in non-returnable containers of different sizes.

We are offering maks 3100 closed cooling treatment. Maks 3100 combines film-forming corrosion inhibitors with a scale suppressant in liquid form, soluble in water in all proportions and does not contain chromate's. Product benefits- - protects all common metals from corrosive attack - protects against cavitation-erosion - helps to keep engines free from sludge and scale deposits - compatible with ethylene glycol anti-freezes - helps to prevent overheating - simple to control, easy to apply, safe to handle.

We are offering maks 180 cleaning chemicals. general description maks 180 is a liquid product containing a blend of acid inhibitors. it helps to protect metals commonly encountered in industrial equipment. product benefits - very effective steel corrosion inhibitor - specially formulated for hydrochloric acid, sulfuric acid and sulfamic acid - inhibits particularly black metals but also effective on copper and its alloys - easy to use - safe and convenient to handle. principal uses maks 180 is a liquid product specially formulated to inhibit corrosion while removing water hardness deposits from industrial equipment. it is particularly effective against hydrochloric acid, hydrofluoric acid, sulfuric acid and sulfamic acid usage. dosage the specific dosage of maks 180 is 1-5 ‰ of total acid used in the in the cleaning operation.

We are offering maks wet tr cons wetting agent. Composition combination of surface active agents appearance pale yellow, bright, liquid ionic type nonionic solubility soluble in every proportion, resistant to hard water. properties suitable for automated systems. -does not show foaming property. -formula does not contain anti-foam agents. application kier boiling 0.6 - 0.8 gr/Lt bleaching 0, 3 - 0.5 gr/Lt shelf life 12 months in closed containers. packaging 120 kg in plastic drums or 1 ton ibc .