Dryers #1966756

The simplest way of removing moisture from compressed air is to reduce the temperature. In this TRIMECH dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3 Deg C is passed through the other side of the heat interchanger.

Chamber-B is depressurized, in the downward direction and the vent gas is released to atmosphere through a purge valve. A controlled portion of the dry gas is used to flush out the desorbed moisture from chamber-B desiccant. When the regeneration is complete, the purge valve is closed and chamer-B is slowly re-pressurized to line pressure for a smooth changeover. A drying period of 5 minutes provides an efficient dew-point of -40 deg. Celsius or better (at atmospheric pressure). In regeneration process approximately 60 seconds are required for re-pressurization.Process gas heatless desiccant dryers are factory skid-mounted and pre-commissioned. They are fully automatic and require no Special Attention. All operations take place automatically and gas Dryness remains consistent. Our Heatless air dryers are compact, economical, pre assembled, fully automatic type of units with very little power consumption of around 100 watts. For detailed offer, please indicate capacity, pressure, and source of compressed air.

In this Particular dryer, the regeneration air is supplied from a blower which is heated in a heating chamber and thus increasing its moisture carrying capacity. This hot air is passed through the desiccant bed for regeneration. And getting the batter and required Dew point.

We provide a wide range of air dryers for different application. As per your requirement and your source of air our expertise will recommended the type of air dryer.

Trimech engineers pvt.ltd has been an industry leader in absorbent desiccant, and gas dehydration and filtration technology. Designed specifically for this application is our refrigerated, landfill digester gas dryer. It is an ideal solution to remove harmful water vapor to improve the combustible quality of landfill gas and biogas, especially when the inlet gas temperature is between 40c and 45c.

The simplest way of removing moisture from compressed air is to reduce the temperature. In this TRIMECH dryer compressed air is passed through a heat interchanger where cold refrigerant at around 3 Deg C is passed through the other side of the heat interchanger.