Post Buy Requirement
TE
Thane, Maharashtra, India
Add Review

Our Products

Square Drive Adaptors

  • sizes 1/4", 3/8", 1/2", 3/4", 1", 1 1/2" and 2 1/2"
Square Drive Adaptors are used as a converter to permit use of sockets with impact wrench of different drive sizes i.e. higher or lower.
These are available in 14", 38", 12", 34", 1", 1 12" and 2 12" square drives of adjacent reducing increasing combinations of male and female drives.
These are of two designs : Square Drive Adaptor with, cross holes for conventional impact wrench. Square Drive Adaptor with groove for locking ring and pin for impact wrenches with cross hole in male square drive.
View Complete Details

Roller Burnishing Tools

Roller Burnishing is a Super finishing process. It is a Cold Working process which produces a fine surface finish by the planetary rotation of hardened rollers over a bored or turned metal surface. Since all machined surfaces consist of a series of peaks and valleys of irregular height and spacing, the plastic deformation created by roller burnishing is a displacement of the material in the peaks which cold flows under pressure into the valleys. The result is a mirror-like finish with a tough, work hardened, wear and corrosion resistant surface. Mirror Finish in One Pass Accurate Sizing, Close Tolerances Improved Metallurgical Properties - Work Hardened Surface Increase in fatigue strength No Additional Machine Investment- attachable to any Standard Machine Tool Already Present in the Shop Long Tool Life No Operator Skill Required Low Torque & Power Requirements Maximum Parts Interchangeability.
View Complete Details

Burnishing Tools

Roller Burnishing tools can be used on lathes, drill press machining centers or any rotating spindles with either tool or part rotating. Any ductile or malleable material like cast iron, Aluminum Steel, Stainless, Alloy, Copper, Brass, Bronze, virtually any material (hardness
View Complete Details

Electric Operated Cold Cutting Machine

  • Machine Capacity 50-1230 mm working range
  • Brand Name TRITORC
  • Operating Type Automatic
  • Voltage 230V
  • Machine Type Pipe Bevelling Machine
  • Motor Type Electric Motor
  • Motor Speed 6600/Min (Rpm)
View Complete Details

Hydraulic Nut Splitter

68,400 /Piece Get Latest Price
  • Material Stainless Steel
  • Nut Size 16-36 mm
  • Stud Diameter 11-22 mm
  •    
View Complete Details

Preset Torque Wrench

8,800 /Unit Get Latest Price
  • Model Name/Number TSP-12N
  • Brand Name Tritorc
  • Square Drive 1/4 Inch
  • Range 2.12 Nm
  • Length 193 mm
View Complete Details

Hex Hydraulic Torque Wrench

80,000 /Piece Get Latest Price
  • Brand Name Tritorc
  • Maximum Torque 2350 Nm, 2420 Nm
  • Model Name/Number THL-2
  • Minimum Torque 230 Nm, 240 Nm
  • Drive Unit 2.2 Lbs
  • Nose Radius 27-43 mm, 43-46 mm
  • Width At Cylinder 51 mm
  • Width At Link 32 mm
View Complete Details

Non Sparking Tools

  • Feature Greater safety personnel and installations
We are one of leading manufacturers of non-sparking tools and will present you with this catalogue an extensive range of products, which can be taiored your special needs.Tristar Non-sparking safety tools can provide a vital extra margin of safety under these conditions. This margin could be crucial in protecting personnel and installations from disaster.
View Complete Details

Nut Runners

  • Voltage 110 or 220 volts
An electric torque wrench is a planetary torque multiplier or a "Gearbox" mated to an electric motor. At the end of the "gearbox" is a reaction device that is used to absorb the torque. This allows the operator of the tool to use the electric torque wrench with very little effort. The tool has an internal computer that shuts off the voltage at a certain level that is adjusted by the operator of the tool. Because of the internal electronics, the electric torque wrench can operate from 110 or 220 volts. Electric torque wrenches offer the reliable and dependable solution for the torquing and untorquing of heavy duty bolts and nuts at various industries with speed, power, accuracy and safety are required. Straight Design Precise tightening or easy loosening from 100 up to 12000 NM. A safe absorbing of reaction forces and the ergonomic pistol grip provide a positive handling. The operator can fully concentrate upon tightening or loosening tasks. Longer life of the power gear, due to completely new bearings.
View Complete Details

Tube Pulling Machine

  • Voltage 415v +/-10%
engaged in manufacturing, marketing and exporting a wide range of industrial tools. Our products are known for their superior quality, durability, robustness and flawless finish, which make them perfect to be used in a number of industrial applications in various sectors such as automobile industry, thermal power plants, petrochemicals, oil Industry, cement plants and construction, to name a few.
View Complete Details

Beam Trolley

  • dimension (150 X 75) or (200 X 100)
TRISTAR' I-Beam Trolley has been designed specially to be used along with Spring Balancers in weld shop of Automobiles on standard I-Beam(150 X 75) or (200 X 100) for 3 Dimensional movement on X-Y-Z axes. "TRISTAR" Trolleys are rugged in construction made from steel side plates graded cast Iron Rollers with good quality Roller Bearings, Steel Shafts, Nitride Rubber Shock Absorbers and Powder Coated for good surface finish. These Trolleys are available in 3 Models for suspending TRANSFORMER, WELDING GUN and KICK LESS CABLE.
View Complete Details

Hydraulic Tube Expansion System

Low noise level easy on operators ears, Best suited for boiler tube expansion inside drums, Accurate torque control by pressure setting on power pack, Safe in operation, 24 v control voltage, Can expand from 34 to 4 O.D. inconjunction with 3 drives.
View Complete Details

Tube Expansion System

  • Voltage 24 v
  • size 3/4” to 4”
Hydrive - Hydraulic tube expansion system. Low noise level easy on operators ears, Best suited for boiler tube expansion inside drums, Accurate torque control by pressure setting on power pack, Safe in operation, 24 v control voltage, Smooth, Can expand from 34 to 4 O.D. inconjunction with 3 drives, Competitive prices.
View Complete Details

Pneumatic Tube Cleaner

Build your own kit by adding Price of Drive (TC - 10 or TCP - 3075), Hollow Drive Shaft, Shaft Coupling, Price Coupling based on Length of Tube to be Cleaned and Cleaning Tools (Brushes, Carbide Drills and Buffing Tools)We will supply all the above in a Handy Metal Box at No Extra Charge. The Box will accommodate Maximum One Drive, 8 Hollow Shaft, 5 Coupling, 16 Cleaning Tools (12 Brushes, 2 Carbide Drill and 2 Buffing Tools).
View Complete Details

Tube Expanding Machine

  • Voltage 230 V, 415 V
engaged in manufacturing, marketing and exporting a wide range of industrial tools. Our products are known for their superior quality, durability, robustness and flawless finish, which make them perfect to be used in a number of industrial applications in various sectors such as automobile industry, thermal power plants, petrochemicals, oil Industry, cement plants and construction, to name a few. Standard scope of supply includes 2 hoses of 12 10 mts long each.
View Complete Details

Boiler Tube Expanders

engaged in manufacturing, marketing and exporting a wide range of industrial tools. Our products are known for their superior quality, durability, robustness and flawless finish, which make them perfect to be used in a number of industrial applications in various sectors such as automobile industry, thermal power plants, petrochemicals, oil Industry, cement plants and construction, to name a few. Offset flare rolls eliminates ridges, Rolls retained in cage when mandrel is removed.
View Complete Details

Stud Drivers

  • diameters 3/8" to 1"
This Tool has been developed for speedier tightening of threaded studs with the help of impact wrench. It has a cross hole and groove for locking pin & ring. It is ideal for use in assembly and maintenance of engines. The range covers stud diameters M6 to M39 in 38" to 1" square drives.
View Complete Details

Tube Tools

We are offering best Tube Tools
View Complete Details

Tristar Hydraulic Tools

We are leading supplier of huge range of tristar hydraulic tools.
View Complete Details

Tristar Impact Sockets

We deals in manufacturing of wide range of tristar impact sockets.
View Complete Details

Automotive Sockets

We are well known for exporting of wide variety of Automotive Sockets
View Complete Details

Tube Expanders

One of the best leading supplier of tube expanders
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • TRITORC EQUIPMENTS PVT. LTD (TRITORC EQUIPMENTS PVT. LTD)
  • Kripam House, Plot No. A-158, Road No. 25 Wagle Industrial Estate, Thane - 400604, Maharashtra, Wagle Estate
  • Share us via