Product / Services
Post Buy Requirement
TH
Tucson Hydrocontrols
Valsad, Gujarat, India
Add Review
Call Now

Our Product / Services

  1. Industrial Valves 15 Products / Services available
  2. Valves & Valve Fittings 3 Products available
  3. Others 11 Products / Services available

Industrial Valves #3793576

hydraulic spool valve

Hydraulic Spool Valve
Unloading valves are used to unload the pump to tank when the pressure in a separate part of the circuit reaches a pre-set level. The most common application is to maintain pressure in an accumulator which may be used in an emergency to operate an essential hydraulic function.
View Complete Details
Ask Latest Price & Details
block valve

Block Valve
Lift Lower blocks are a compact hydraulic solution to control single acting cylinders that are generally mounted on stackers and scissor lifts. They offer a complete solution for lifting, controlled lowering and safety of the pump, cylinder and personnel.
View Complete Details
Ask Latest Price & Details
pilot check valves

Pilot Check Valves
  • Max Flow 35 lpm
  • Max Pressure 350 bar
Pilot check valves allow flow to pass in one direction, with a low pressure drop, then prevent reverse flow until pilot pressure is applied. There are many applications for this valve type, the most common being to lock and hold a cylinder, or another hydraulic actuator, in position. The CK35 is a small cartridge valve and is ideally suited for fitting directly into a cylinder, giving economy of installation, direct control of cylinder movement and ease of servicing.
View Complete Details
Ask Latest Price & Details
counterbalance valves

Counterbalance Valves
  • Max Flow 180 lpm
  • Max Pressure 250 bar
  • Leakage 0.3 ml/min (5 dpm)
Counterbalance valves give static and dynamic control of loads by regulating flows in or out of hydraulic actuators. They prevent load runaway or allow for thermal expansion of the hydraulic fluid in the system. They can also be used to develop back pressure in applications such as plastic moulding to improve the colour quality of the polymer mix.
View Complete Details
Ask Latest Price & Details
Direction Control Valve

Direction Control Valve
  • Max Flow 450 lpm
  • Max Pressure 350 bar
Directional spool valves type WE22 (electrically operated) are intended for change in direction of fluid flow in a hydraulic system and thus it allows to change direction of movement of a receiver - mostly piston rod of a cylinder or hydraulic motor as well to use functions: on and off. These directional spool valves are used for subplate mounting in any position in a hydraulic system.
View Complete Details
Ask Latest Price & Details
cartridge valve

Cartridge Valve
Cartridge valves are used to limit the pressure in the system as set on the valve. Direct Relief Valves are applicable in systems where quick pressure release is of prime concern for safety. This is an economical solution for systems having small flows. The valve is a zero leak valve due to the metal sealing of the poppet on the seat. The DR06 can also be used for pilot systems.
View Complete Details
Ask Latest Price & Details
hydraulic valves

Hydraulic Valves
Lift Lower blocks are a compact hydraulic solution to control single acting cylinders that are generally mounted on stackers and scissor lifts. They offer a complete solution for lifting, controlled lowering and safety of the pump, cylinder and personnel.
View Complete Details
Ask Latest Price & Details
pressure valve

Pressure Valve
The modular or sandwich valve is stacked along with directional valves in CETOP 3 interfaces to provide a reducing valve system in various ports depending on the configuration. The valve can be used to either reduce pressure in the main pressure port P or the actuator ports A or B.
View Complete Details
Ask Latest Price & Details
hydraulic control valve

Hydraulic Control Valve
Counterbalance valves give static and dynamic control of loads by regulating flows in or out of hydraulic actuators. They prevent load runaway or allow for thermal expansion of the hydraulic fluid in the system. They can also be used to develop back pressure in applications such as plastic moulding to improve the colour quality of the polymer mix.
View Complete Details
Ask Latest Price & Details
Hydraulic Solenoid Valve

Hydraulic Solenoid Valve

  • Max Flow: 30 lpm Max Pressure: 250 bar
Typical usage includes the control of actuators in a hydraulic system, decompression of hydraulic fluid in heavy cylinders etc.
View Complete Details
Ask Latest Price & Details
Hydraulic Check Valves

Hydraulic Check Valves
These cartridge check valves allow unidirectional flow at a low pressure drop. They fit into machined cavities and are therefore perfect for installation into custom made hydraulic circuits, manifold blocks or other hydraulic equipment for load sense or low flow applications.
View Complete Details
Ask Latest Price & Details
Hydraulic Cartridge Valve

Hydraulic Cartridge Valve
When the pump is switched on, the oil from the pump extends the cylinder. After full extension, the Check Valve (1) holds the load in place at which point the pump can be switched off. To lower the valve, the Solenoid Valve (3) is energized which opens the flow of oil to tank. The rate of lowering is adjusted by means of a Flow Control Valve (3). There is an inbuilt Relief Valve (4) for pump protection in case of a rise in pressure.
View Complete Details
Ask Latest Price & Details
Hydraulic Directional Control Valve

Hydraulic Directional Control Valve
Throttle valves can be used where volume flows have to be infinitely controlled in both directions without taking pressure fluctuations into account. The screwed cartridge design is ideal for installing in manifold blocks or in CETOP sandwich plates
View Complete Details
Ask Latest Price & Details
Pressure Control Valve

Pressure Control Valve
  • Max Flow: 30 lpm Max Pressure: 350 b
The modular or sandwich valve is stacked along with directional valves in CETOP 3 interfaces to provide a reducing valve system in various ports depending on the configuration. The valve can be used to either reduce pressure in the main pressure port P or the actuator ports A or B.
View Complete Details
Ask Latest Price & Details
Poppet Valve

Poppet Valve
  • Max Pressure 350 bar
  • Leakage Less than 1 ml/min (15 dpm)
Solenoid Poppet Valves are extremely versatile. They can be used in various systems and are flexible in their mounting capabilities. Typical usage includes the control of actuators in a hydraulic system, decompression of hydraulic fluid in heavy cylinders, On-Off systems, Pilot Valves, etc.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Suhas Indulkar (Tucson Hydrocontrols)
  • C1B, Plot No. 246/5, GIDC Estate, Umbergaon, Valsad, Gujarat - 396171, India
  • Share us via
    Linkedin pinterest
View Contact No.