We offer cables in different qualities, perfectly tailored to the respective application. The products range from simple PVC up to PUR and PP cable types for food and beverage applications. All cables are available as yard goods or with injection-moulded connectors.

With the compact or modular RFID system from Turck, you can use the proven HF technology and the wide-reaching UHF technology in parallel in one identification solution. The Turck RFID system offers tags, read/write heads, connectivity solutions and the corresponding interfaces, which can be flexibly combined depending on requirements. Interfaces are available for PROFINET, EtherNet/IP, Modbus TCP, PROFIBUS-DP, DeviceNet, CANopen and EtherCAT.

The programmable gateways of the BL20 (IP20) and BL67 (IP67) I/O systems can be used as autonomous PLCs for control tasks or as network devices for fast signal preprocessing in the periphery. For this, the gateways have a fieldbus interface for PROFINET, Modbus TCP, Ethernet/IP or PROFIBUS-DP; in addition the gateways support standard Ethernet and serial communication. The extension modules communicate via the internal module bus with the gateway and can be configured independently of the fieldbus protocol.

The HMI controls of the TX500 product series have high-quality displays with brilliant graphics, resistive touch, and a modern processor. They are ideal for use in small to medium-sized machines, whose processes must be controlled, operated, and observed locally. The CODESYS 3 control of the TX500 has the functions PROFINET controller, EtherNet/IP and Modbus TCP as well as Modbus RTU Master. When used with Modbus protocols, the HMIs can also be operated as slaves. For visualization the CODESYS 3 target is used.

Control and monitor your production seamlessly and comfortable. We have the right automation solution for you - such as programmable gateways, as well as HMI operator panels and controls.

The power supply units of the PSU67 series are IP67 rated and can be mounted in the field. Short power drops of maximally 50 ms are bypassed independently by the devices. Failsafe operation is enhanced through no-load and short-circuit protection as well as passive air cooling. The output current is - depending on the type - 2 A, 4 A or 8A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. The high efficiency of up to 90% provides a good energy balance.

Path measurement can be solved with various sensors. The inductive linear position sensors operate contactless and wear-free according to a revolutionary measuring principle. The position is not detected via a positioning magnet but via an oscillating RLC circuit. The product portfolio comprises magnetostrictive linear position sensors for position tracking in hydraulic cylinders or encoders for the tracking of floats as well as draw-wire sensors.

Over a length of up to 40 meters, path information is transmitted in a highly precise and dynamic manner to the higher-level controller via digital and analog interfaces.

The LED-lighting solutions for industrial requirements offer a wide range of work lights, tower lights and multisegment indicators. Moreover, also tower lights for visual and audible status messages, as well as robust LED work and machine lights. The devices are characterized by low power consumption. Thanks to their long lifetime, the LEDs need not be replaced.

The contactless encoders Ri360P-QR24 and Ri360P-QR20 make no compromises in terms of ruggedness and resolution and are suited to all those applications where rotation speeds, sense, position, angle and lengths have to be captured. These series are wear-free and will withstand even the harshest environmental conditions. Our range provides encoders in a wide variety of designs, graduated in a range of sizes from 24 mm up to 102 mm diameter, as versions for incremental or absolute position detection, and as hollow or solid shaft variants; they can be used to easily and reliably perform positioning tasks with a resolution of up to 18 bits for absolute encoders and of up to 36, 000 pulses per revolution for incremental encoders.

The degree of automation is very advanced in today's manufacturing technology. At the same time, machine and system hazards have been reduced considerably. This is, in particular, owed to the high demands on the safety technology and the skilled handling of safety functions. For security solutions in mechanical and plant engineering, we offer a choice of powerful, certified components and systems.

Our rugged inclinometers of the Q20L60 and Q42 series capture almost any inclination and can also be used in systems implementing fast motions or subjected to shocks. We offer sensors for angular ranges of 10, 45, 60 and 85 as well as with freely selectable measuring range 0360. The following output variants are available: 420 mA, 0.14.9 V, 010 V, PNP/NPN window as NC or NO contact, IO-Link, CANopen.

Everywhere, where digital signals must be electrically separated and processed or current and voltage limited power supply is needed, our interface devices are used such as isolating switching amplifiers, solenoid drivers, relay couplers and rotation speed monitors. The interface devices are available in the IP20 modular housing for DIN rail as well as in the compact IP67 housing for decentralized remote-site use. The product portfolio also comprises solutions for the Ex area and SIL-certified devices.

We offer round connector systems in M8 1/ 8 mm and M12 1 acc. to IEC 61076-2-101 as connection and extension cables. The 1/2" and 7/8" round connector systems are particularly suitable for applications with increased power requirements. The M16 and M23 0.75 1 round connector systems are used for connecting multiple junction systems. A, B, C, or I-type valve connectors acc. to EN 175301-803, are available with and without protective circuit for the connection of various different valves.

We offer the appropriate interface device for separating, forming, processing, converting and conditioning analog signals. The product portfolio comprises analog signal isolators, isolating transducers, temperature measuring amplifiers, potentiometer amplifiers, trip amplifiers and level monitors - for simple and complex requirements, for Ex- and non-Ex applications, available in the IP20 housing for DIN rail as well as in the compact IP67 housing for decentralized on-site remote control.

The IM(X) 12-CCM (Cabinet Condition Monitoring) can be installed and even retrofitted in virtually any cabinet or any protective enclosure to continuously check the current protection degree offered. The DIN rail device issues a switching signal to indicate

incorrectly closed doors and limit value violations for temperature and internal humidity to the control system.

Field-wireable connectors are available in sizes M8 1/ 8 mm, M12 1, 1/2", 7/8", M16 0.75, M23 1 and also as valve plug. The connectors make installation easier in applications in which it is difficult to estimate the needed cable length.

The blenders at Somakon are very popular at the research and development departments of renowned industrial users, because they can be adapted individually to most tasks because of their modular concept. To offer this flexibility at a good price performance ratio, Somakon uses Turck's HMIPLC, VT250, as efficient control and operation unit.The blenders at Somakon are very popular at the research and development departments of renowned industrial users, because they can be adapted individually to most tasks because of their modular concept. To offer this flexibility at a good price performance ratio, Somakon uses Turck's HMIPLC, VT250, as efficient control and operation unit.

Laempe Mssner Sinto is a global leader in core shop technology for the foundry industry and one of the few manufacturers of core shooters worldwide. The machines produce sand cores for metal casting. If, for example, the casting of an engine block is required, cores are placed inside the casting mold to later produce the cavities of the engine. A key objective of core shooter manufacturers here is short cycle times.

We are offering interface product.Take advantage of the flexibility and versatility the turck interface product portfolio offers: compact designs, a choice of different operating concepts and configurations, as well as a wide range of features for separating, conditioning, processing, converting and adapting digital and analog signals - available as 1 to 4-channel versions, for ex and non-ex applications. You get interface solutions in the required design and with the functionality you need for your application.

A Chinese manufacturer of differential gears uses Turck's TBIL IO-Link hub to connect hundreds of sensors and actuators in production. Each of these junction boxes connects up to 16 sensors or actuators via IO-Link. The solution saves minimizes the time required for assembling multicore cables while also reducing costs. The solution is completed with Turck's BL20 Profibus gateways with IO-Link master modules. Besides switching signals, they also bring RFID data and analog signals to the PLC.

the new welding nut sensor, Turck is now offering an affordable and process reliable alternative to previously used and expensive optical detection methods that are prone to error or malfunction.Spacer sleeves and welding nuts are used to ensure that vehicle components such as frames, U-beams, car seats or tanks are assembled to meet the design requirements. If even one single nut or bushing is missing from its intended location, production comes to a standstill and the work goes into the scrap pile. One approach to solving the component inspection problem is the use of fiber optics which can sense the bolts laterally. However, because the weld spatter that builds up can impair the fiber optic functions and even disable them, this process is expensive and unsuitable.

The Swedish Purac Puregas company is an expert for biogas upgrading plants, which can upgrade biogas from fermented household garbage and other organical waste very efficiently into methane and CO2. Purac Puregas recently improved the maintenance work for its gas plants with a new remote IO system that met all their demands: Turcks excom system for use in hazardous and non-hazardous areas.With its gas company Purac Puregas the Swedish Lckeby Water Group offers biogas upgrading plants. The Purac Puregas gas plants take raw biogas and upgrade it to practically pure bio methane. With its chemical absorption process, called CApure, the plants remove carbon dioxide and hydrogen sulfur (H2S) from the raw biogas. That increases the efficiency of the biogas plant and improves its ecobalance.

the automotive industry has used RFID solutions, mainly for the identification of their vehicle body transport systems. Thanks to improved technology and the automotive knowledge of the RFID specialist Turck, the industry today considers equipping every single vehicle body and component with data carriers, to benefit from a continuous identification and quality control through the whole production process One of the main advantages of RFID: The user can read the authenticity features and also rewrite them to a data carrier. Data carriers (also known as tags) accompany the part through the whole production cycle or quality test; relevant data is written automatically onto the tag and read at the end of the production cycle. Together, with the finished product, there is also a quality management protocol available that shows all production steps of the product, as well as the quality test.