Our Products
he tyco electromagnetic vibrator provides effective and economical method of maintaining free flow of stubborn materials from bins and hoppers and through chutes.
the electromagnetic vibrators, where the amplitude may be adjusted from full vibration to a fine tremor, keeps the particles agitated in a free flowing state. Each vibrator is furnished with a controller having an operating switch, which set up a flow pattern of powerful pulsating vibrations.
the electromagnetic design of tyco vibrators eliminates mechanical and pneumatic parts - bearings, belts, chains, valves, hose or motor. These are built for trouble free duty with a minimum of maintenance.
Particulars | Model T 5 | Model T 7 | Model T 20 |
---|---|---|---|
Vibrations per minute | 3000 | 3000 | 3000 |
Maximum input - amperes | 2.6 | 3 | 7 |
Supply 50 cycles, A.C. | 220/240 volts | 400/440 volts | 400/440 volts |
Approx. Net Weight, Vibrator | 25 Kgs | 76 kgs. | 127 Kgs |
Approx. Net Weight, Controller | 15 Kgs | 15 kgs. | 15 Kgs |
The Air Classifier is a centrifugal type classifier used to separate dry powdered materials into fine and coarse fractions. It may be operated in closed circuit with a grinding mill or used in open circuit operation, receiving the feed from hoppers, bins screens.
The classifier fineness characteristics are controlled mainly by changing the number, size of whizzer blades or by adjustment of vertical slide dampers. These adjustments can be conveniently made to produce the product of required fineness. Tyco classifiers are capable of delivering fine products from 8085 % passing 60 mesh to as fine as 99.9% passing through 100 mesh depending upon the material characteristics.
When operated in closed circuit, combination with a Pulveriser the separator skims off the fines as fast as they are made, so that the mill works only on fresh material without wasting power. The tailings are discharge back to the mill for further reduction. The reground material is returned to the separator with the feed, so that constant circulating load set up between the mill & the separator.
A substantially longer jaw life is achieved as a result of the unique jaw geometry. The centerline of crushing zone is aligned with the hinge pin center and the material to be crushed is held firmly by the straight line crushing action of the jaws. This principle uses pure compression to crush, eliminating rubbing within the crushing chamber. Double toggle action ensures crushing even on the down stroke and provides maximum mechanical advantage to the eccentric. Lighter pitman and toggles reduce inertia, and enables a greater through put to be achieved.
A very useful material handling system for transferring Material from ground level to upper level. Each conveyor is designed according to their load carrying capacity. Modular and light in weight with imported belt for proper grip to avoid slide down of material. Degree of Inclination varies from 1 to 45 depending on the requirement of the customer and material characteristics. Can be used for both up and down movement
Modular design and customised features and performance makes it a top most favorite with customers who wants to handle the logistics (50 Kg Bags of grain, Soya, DOC, Sugar etc) in the warehouse where after automatic weighing and bagging, bags are lifted, diverted, raised, lowered for either loading in trucks or for stacking in the storage areas.
Its unique design for loading and unloading of 50 kg bags both jute and hdpe, makes it a favorite in Soya grain, sugar industries.
Having a minimum feeding height of 300 mm and a maximum 3 Meter height makes it very competent for loading to and unloading from the Trucks.
Entire conveyor is mounted on an easily maneuverable trolley. A 2 HP Hydraulic Power Pack takes care of the raising and lowering. Imported German make control Panel with IP 65 enclosure and Variable Frequency Drive of reputed make ensures efficiency. Designed for 5 TPH or 100 bags of 50 kg per hour.
Tyco Bag Stackers are most useful for stacking 50 kg Soya (seed or DOC), grains, Sugar bags either jute of hdpe.
With a top height of 15 feet it reduces the time and manpower considerably and become an indispensable part of storing activities.
Easy maneuverability, short radius for turning and equipped with 2 hp hydraulic power pack, imported control panel, belt and various other user friendly features adds up its efficiency quotient.