Rubber Refiner Mill for Reclaim projects. We offer Refiner mills for rubber from 16"x18"x42" to 21"x24"x36". Refiner mill is the most important machine required in a reclaim rubber project. refiners are highly efficient as well durable . The success of a good reclaim project mainly lies in the hand of a Rubber Refiner mill. rubber machinery are of world class quality that can give the best quality result. Features of Rubber Refiner mill are : Rolls : Alloy Chilled Cast Iron rolls with Surface hardness 510 ~ 550 BHN. The Rolls are mirror finished & polished, duly grinded and are hollowed for cooling. Stand Frame & Apron (Cap) : Heavy Duty Steel Casting / Steel Fabricated. Journal Bearing Housing : Steel Casting Housing fitted with Anti Friction Roller Bearings. Lubrication : Manual / Motorized Grease pump for lubrication of Anti Friction Roller Bearings fitted in dust sealed housing. Base frame : Common base frame, heavy duty Steel fabricated of Double Channel and MS plate accurately machined for fitment of auxiliary equipment. Gearbox : Helical reduction gearbox, Greaves Make. Electric Control Panel : Star Delta Electric operating panel with Voltmeter, Ammeter Overload protection relay and Emergency switch 3 phase indicator arrangement.

Specification : FRAME : The Frame Is Made From Steel Construction And Their Heavy Cross Section And Rigid Design Assured Minimum Deflection And Accurate Alignment Cast Iron Legs Will Be Supplied Up To 30 Ton Press. CRANK SHAFT : Crank Shaft Made From Special Alloy Steel To With Stand The Effective Load, It Is Fitted With Gun Metal Bushes For Smooth Working With High Accuracy. GEARS & CLUTCH : The Gears Are Made From Cast Steel Or Fabricated And Its Teeths Are Generated By Hobbing. The Clutch Is Provided Of Pin/ Rolling Key Type, It Is Also Rigid And Well Supported For The Mass Production. Clutch Can Give Continuous Stroke. FLYWHEEL : The Flywheel Is Made From Gradead Cast Iron For Strength And Is Balanced For Efficient And Releasing Adequate Energy For The Pressing Operations. LUBTICATION : A Lubrication System Has Been Provided For Lubrication The Sliding Surface And Moving Parts. TABLE & RAM : Table and Ram Are Made From High Grade Heavy Duty Cast Iron & Properly Seasoned. They Are Perfectly Aligned To Match Each Other To Obtain High Accuracy & Precision Press Operation.

• MACHINE SIZE70 mm to 150 mm
• BARREL MATERIALEN 41B
• SCREW MATERIALEN 41B
• FRAME TYPEC-CHANNEL
• BEARINGBLOCK TYPE BEARINGS

Use high quality raw material and applied proper chanel of manufacturing process and use perfect testing method. We assured you for unmetched quality and trouble free performance.

The vials coming from sterilizing tunnel will be sent to conveying belt through the turntable, sent to the transition star-wheel through conveying belt and sent to filling star-wheel through transition star-wheel for positioning filling, filling star-wheel locate vials at filling nozzle, filling auger begins to work, fill powder directly into vials. After filling, vials are sent to stoppering station. During stoppering station, the vials are sent to the rotary stoppering plate, the stoppers are sucked by the vacuum, and move with the stoppering plates, the vials moves up and then they are plugged with stoppers one by one. After stoppering, the vials will be sent out to the collecting tray through the star-wheel. Up to now, then whole filling and stoppering process are completed. Basic Parameter  Filling head 2 Stoppering head 12 Key Words: Pharmaceutical Machinery, Pharmaceutical Engineering, Pharmaceutical Equipment,   Packaging Machinery, GMP Machinery, Pharmaceutical Industry, Pharmaceutical Technology cGMP Service, cGMP Solutions, cGMP Validation

• Chain Mortiser Sizemm / inch
• Table Size560 x 228 / 22" x 9"
• Up/Down movement of Table75 / 3"
• Cross movement of Table100 / 4"
• Longitudinal movement of Talbe305 / 12"
• Max. Depth of cut140 / 5 1/2"
• Electic motor300 / 12"
• Power Required HP/RPM - 1 Phase / 3 Phase2 HP / 1440 RPM
• Weight242 Kg.

• SPECIFICATIONSWorking Surface mm
• 1050 x 250Number of T-Slots
• 3Width of T-Slots
• 15 mmPitch of T-Slots
• 62 mmMaximum Distance from Spindle Centre to Underside of Over Support
• 125 mmMOVEMENTS
• Longitudinal Movement of the Table by Lever / Screw600 mm
• Cross Movement of the Table by Screw230 mm
• Vertical Movement of the Table by Screw450 mm
• MILLING SPINDLESpindle Bore
• 17 mmInside Taper
• ISO - 40Arbor
• 25.4 mmREVOLUTION OF MILLING SPINDLE
• Number of Spindle Speed6
• Range of Spindle Speed50, 85, 110, 240, 350,525 RPM
• Number of Feeds3 Feeds (0.9, 1.4, 2.25 Per Minute )
• ELECTRICALMain Drive Electric Motor
• 2 HP, 1440 RPM, 440 V. 3 PhaseCoolant Motor
• 0.11 KW, 2700 RPMOTHER DIMENSIONS
• Floor Space550 x 925 mm
• Height1500 mm
• Coolant Tank Capacity20 Ltr.

Products such as pizza or frozen dough have exit temperatures in the lower 70’s or cooler.  For cookies and pies. it’s even lower.  Cool down dough temperature with our Cold Bar & Cold Bar .   It is the solution to your temperature problems without adding ice,  chilled water, flour and other ingredients to the mixer.

• Series Cap3 to 25mm
• Length1250 to 5000mm

Application :   Our company offers Injection Molding Machines built by industrial professionals according to the set industrial standards and norms. We provide these Molding Machines to our customers in varying sizes and specifications keeping in mind the client's requirement. These Injection Molding Machines are used in the industry to make several industrial and sanitary items such as refrigerator bodies and door linings, Automotive seats, Hand rests, Doors, Glow symbols, Bathroom furnishing items, Trays, etc.Molding Machines offered by S.K Industries are professionally built to deliver high performance, These machines are also used to construct house decoration items like aluminum plastic plates.