Ace Stainless Supply

• FinishingPolished OD & ID
• Overall Length3.000"
• Inside Diameter1.870"
• Outside Diameter2.000"
• Connection TypeQuick-Clamp x Butt-Weld

Use with dairy, water, and air, except the tri-clamp to threaded pipe adapters are not for use with dairy. They can be sterilized with steam (autoclaving). Not rated for vacuum. Note: To complete the connection, these fittings require a clamp and a gasket. These sanitary ferrules do not work with our automotive V-Band clamps. Polished to a 32Ra finish on the OD and to a 23Ra-32Ra finish on the ID. Our sanitary fittings meet the 3-A Sanitary Standards Number 63-03. The 3A Sanitary Standard was created by the dairy industry as a voluntary benchmark for product performance and sanitary safety. The standard, collaboratively developed by a group of processors, suppliers, regulatory officials and sanitation specialists, is generally accepted by federal, state and local regulatory authorities.

• FinishingPolished OD & ID
• Material Type304 Stainless
• Outside Diameter0.750"
• Connection TypeQuick-Clamp x Butt-Weld
• Inside Diameter0.620"

Use with dairy, water, and air, except the tri-clamp to threaded pipe adapters are not for use with dairy. They can be sterilized with steam (autoclaving). Not rated for vacuum. Note: To complete the connection, these fittings require a clamp and a gasket. These sanitary ferrules do not work with our automotive V-Band clamps. Polished to a 32Ra finish on the OD and to a 23Ra-32Ra finish on the ID. Our sanitary fittings meet the 3-A Sanitary Standards Number 63-03. The 3A Sanitary Standard was created by the dairy industry as a voluntary benchmark for product performance and sanitary safety. The standard, collaboratively developed by a group of processors, suppliers, regulatory officials and sanitation specialists, is generally accepted by federal, state and local regulatory authorities.

• Length6.000
• Schedule40 (0.133")
• Nominal Pipe Size1" (1.315" Outside Diameter)
• Connection TypeThreaded Both Ends (Male NPT x Male NPT)

Our 304L Stainless Steel pipe nipples are a high quality, cost effective threaded solution for industrial, construction, plumbing, and more. Our nipples are ASTM A773 and ASTM A312 compliant and are offered in nominal pipe sizes from 18" to 6" in both 304L and 316L stainless. Please contact us if you need super alloys such as Duplex, Hastelloy, and more.

• Length3-3/4"
• Ultimate Load Strength7976 LB
• Ultimate Shear Strength9210 LB
• Minimum Install Depth3"
• Thread Size1/2"-13

12"-13 x 3-34"" Wedge Anchor 316 Stainless Includes one (1) flat washer and one (1) finish hex nut per anchor.

• 1/2" (0.840")Compression x Male NPT
• Tube OD End1/2" (0.500")
• Pipe Size1/2" (0.840")

• Size0.500"
• Specification3A Standard, 21CFR 177.2600
• Gasket ColorBlack
• Shelf Life10 years
• Material TypeBuna-N

• Pressure Rating150#
• Connection TypeFemale Threaded
• Pipe Size1" (1.315")
• ASTM SpecificationA351

For use with air, water, oil, natural gas, steam. Maximum Pressure: 150 psi @ 72 F; 150 psi @ 366 F for steam Our low-pressure 150# threaded stainless steel fittings should be used with schedule 40 threaded nipples and pipe