Advanced Test Equipment Rentals

• Dimensions19 x 18 x 12in (500 x 457 x 305mm)
• Model1921C

The Kaelus IQA-1921C PIM Test Set is a feature rich, high power PIM test solution that can be use for testing per IEC 62037. The IQA-1921C is a proven analyzer that enables network operators to improve site performance by finding and eliminating sources of passive intermodulation at the cell site. The design includes an integrated panel PC with intuitive touch screen interface for performing tests and generating site reports. Rugged, reliable construction suitable for field use Integrated polycarbonate transit case Range to Fault (RTF) enabled Fully configurable frequencies, powers and IM products Simple to operate touch screen interface Spectrum monitor, frequency sweep and time trace modes

• Model NumberS331E

To keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field. The Anritsu S331E Site Master Cable and Antenna Analyzer does all this while delivering the ease of use, rich functionality, and best-in-class priceperformance you've come to expect from Anritsu. Designed to handle the most punishing field conditions, the Anritsu Site Master Cable and Antenna Analyzer dramatically enhances your productivity and transforms the traditional fix-after-failure maintenance model to one that identifies and fixes problems before major failures occur.Return Loss, VSWR, Cable Loss, Distance-To-Fault Phase, 2-port Transmission Measurements High Accuracy Power Meter, GPS Field-proven design: Four-hour battery life, rugged, compact, lightweight, daylight viewable display USB connectivity, built-in touch screen keyboard Intuitive menu-driven touch screen user interface

• Model Number1900A
• Operating temperature range0°C to +45°C

Kaelus IHA-1900A Companion PIM Analyzer 1900MHz Small, light weight Battery operated Rugged construction One button push-to-test LED bar display indicates PIM level LED bar display indicates PIM level

• Model NumberSA-6000EX
• Frequency Range25-6000

The Bird SA-6000EX Site Analyzer, 25 MHz - 6 GHz is the user-friendly test solution for installing, maintaining, and troubleshooting your antenna and cable systems. Field engineers and technicians rely on this rugged handheld tool to get the job done. Wireless equipment manufacturers, service providers, contractors, tower erectors, and military field personnel world wide approve of the analyzer's precision VSWR and Return Loss results. Wideband Power Sensors up to 4 GHz optionally available for use with the built in Digital Power Meter.

• Model NumberS331
• Range80.0 to +80 dBm or10.0 pW to 100.0 kW

Frequency Range 25 to 3300 MHz Frequency Accuracy (RF Source Mode) 75 parts per million @ 25°C Frequency Resolution 100 kHz SWR: Range 1.00 to 65.00 Resolution 0.01 Return Loss: Range 0.00 to 54.00 dB Resolution 0.01 dB Distance-To-Fault (DTF): Range (in meters) 0 to (Resolution x dp) Resolution (in meters) (1.5 x 10 8)(V f) (Rectangular Windowing) deltaF Where Vf is the relative propagation velocity of the cable. dp is the number of data points (128, 256, 512). deltaF is F2 - F1 (in Hz.)

• Model NumberMW8209A
• Size & Weight300 mm x 425 mm x 500 mm (12 in x 17 in x 20 in)

The iHA Companion series Passive Intermodulation (PIM) analyzer complement Summitek’s 20 Watt PIM test solutions. The iHA is a lightweight, low power PIM analyzer that can be carried up the tower for coarse component checks or connected at the bottom of the tower to check for badly out of performance interconnections. Anritsu has developed the PIM Master to verify if receiver interference at a cell site is due to an intermodulation product of two or more transmit frequencies, also known as passive intermodulation (PIM). The PIM Master generates two high power tones in the transmit band of a base station and Anritsu’s family of handheld RF instruments’ PIM Analyzer measures the 3rd, 5th, or 7th order intermodulation products in the receive band coming back down the same cable. And the GPS option will record the location of the measurement. PIM Testing versus Line Sweeping A PIM test cannot, however, measure VSWR. This means the test set will not see an open or short condition, unless the fault displays non-linear behavior. A return loss figure that is failing will not be determined with a PIM test measurement. Components deteriorate as they age due to a number of issues, including poor mechanical design, poor installation, and moisture ingress (which is the most significant). On-site faults can mostly be categorized into two main types: linearity related and impedance related. PIM testing measurements reflect the overall linearity of an antenna feed line and Line Sweep measurements reflect the overall impedance matching of all of the components in an antenna feed line. Both tests need to be performed to ensure the overall quality of an antenna feed line. Passing one type of test (PIM or Line Sweep) does not guarantee the other test will pass. Features: Tx Band: 925 to 960 MHz IMD Band: 880 to 915 MHz IMD Orders: 3rd, 5th, or 7th orders (user selectable) Featuring 2 x 40 Watts of RF Power. Finds PIM that cannot be found by 2 x 20 Watt PIM testers Patented Distance-to-PIM™ (DTP) The Fastest Way to Pinpoint the Source of PIM

• Model110A

Passive Intermodulation (PIM) testing accessory kit with components required to validate test equipment operation and perform PIM testing on systems with 7-16 DIN and Type-N connectors. Hard transit case included for protection and transportation of components. Transit Case Assembly Tool Bag 3m test cable, Dm–Df 3m test cable, Dm-Dm Adapter, Dm-Dm Adapter, Dm-Nm Adapter, Dm-Nf Connector cleaning kit Adjustable wrench Torque wrench, 32mm, 25Nm PIM Source Low PIM Load Related Products

• ModelPIM 31
• Dimensions366 x 495 x 192 (mm) 14.4 x 19.5 x 7.6 (inches)

Boonton's PIM 31 series test systems are precision analyzers for passive intermodulation generated in RF paths, components and assemblies. PIM 31 analyzers allow the detailed examination of components used in radio base stations, in-building-DAS installations and other systems transmitting radio frequencies. The PIM 31 passive intermodulation analyzer emulates a base station radio by providing two signals, up to 20W each, thus following the IEC62037 standard for PIM testing. The frequencies of these carriers are variable within the band of the analyzer, allowing PIM 31 operators to select the optimal frequencies for their wireless systems. Depending on the application it can be switched between a functional field diagnostic mode and detailed analysis mode with accessibility to all settings and readings. PIM 31 analyzers can be controlled by external mouse and keyboard or through the built-in touch screen display. 20W PIM analyzer Two variable signals +20 to +44 dBm each User selectable TX frequencies within the analyzer's band Very high PIM sensitivity of -175 dBc @ 2 X 43 dBm carriers Measures Intermodulation products IM3, IM5, IM7 and IM9 User settable frequency sweeps Measurement recording numeric or image traces Touch screen display Maxhold

• Model NumberS331L
• Frequency Range50 MHz to 4 Ghz

Anritsu S331L Site Master Handheld Cable & Antenna Analyzer > 8 Hour Battery Life Instant On from Standby Mode Highest RF Immunity Built-in InstaCal™ Module Fast, One-connection Calibration FlexCal™ Calibration One Calibration for All Frequencies Built-in Power Meter Rugged and Reliable Impact, Dust, and Splash Resistant Smallest, Lightest Site Master

• Frequency Range:5 MHz to 4 GHz
• ModelJD724C

The majority of problems in mobile networks occur in the base station's infrastructure, consisting of the antenna system, cables, and connectors. To properly service and install cell sites requires suitable test equipment. The JDSU JD724C CellAdvisor Cable and Antenna Analyzer is an optimal test solution for characterizing cell-site infrastructure because of their handheld design, ease of use, and rich functionality. The JDSU JD724C CellAdvisor Cable and Antenna Analyzer offers the measurement functions necessary to accurately verify a site's transmission line and antenna system from signal reflections (voltage standing wave ratio [VSWR] or return loss) to RF or optical transmission power. In addition, the JDSU JD724C CellAdvisor Cable and Antenna Analyzer accurately measures the distance to fault (DTF) for proper identification of its location. Intuitive user interface with touch screen and indooroutdoor display modes Dual display and zoom zones for faster analysis RF port protection up to 40 dBm (10W) Controls RF and optical power sensors

• ModelMT8212E

The Anritsu MT8212E Cell Master Base Station Analyzer is the smallest, lightest, and most economical solution for 2G3G4G, and WiMAX base station transmitter testing and ISDB-T and DVB-TH digital broadcast field testing. It's ideal for installation and commissioning as well as for maintenance and troubleshooting.This optimal combination of base station test capabilities in one handheld device eliminates the need for several independent test instruments, thereby reducing the number of tools the user must carry and learn to operate. Whether it's sweeping cables, making power measurements, finding interference, troubleshooting base station signal quality, or verifying backhaul performance, the Cell Master MT8212E is the ideal all-in-one instrument to help keep your network up and running. 30 Analyzers in one 3GPP, including LTE, 3GPP2 and WiMAX signal analyzers ISDB-T and DVB-TH signal analyzers Interference mapping with GPS guidance Indoor and outdoor coverage mapping Easy-to-use Touch screen USB connectivity Most compact handheld

• Dynamic Range110 dB (20 MHz to 40 GHz)
• ModelS820E

• Model NumberMT8222A

The BTS Master is an integrated multi functional base station test tool eliminating the need to carry and learn multiple test sets. The Anritsu MT8222A measurement capabilities include spectrum analysis including smart measurements, precision return loss, VSWR, cable loss, distance-to-fault, two port gainloss, one port and two port magnitude and phase, interference analysis, spectrogram, RF and demodulation measurements for WCDMAHSDPA, GSMGPRSEDGE, CDMA, EVDO, TD-SCDMA, Fixed WiMAX and Mobile WiMAX, demodulating WCDMAHSDPA, CDMA, TD-SCDMA, EVDO over the air (OTA), location information, enhanced frequency reference oscillator accuracy, variable bias tee, 2 Mbs - E1, T3 and T1 measurements. The High Accuracy Power Meter (Option 19) provides true RMS measurements. Options: MT8222A-005: Power Monitor (requires external detector)** MT8222A-010: Bias Tee variable voltage MT8222A-10A: High Voltage Bias Tee MT8222A-019: High Accuracy Power Meter (PSN50 sensor not included) MT8222A-025: Interference Analysis MT8222A-026: 6 GHz Cable and Antenna Analyzer (10 MHz to 6 GHz) MT8222A-027: Channel Scanner MT8222A-028: CW Signal Generator (requires CW Signal Generator kit) MT8222A-031: GPS Receiver (includes GPS antenna, Anritsu part number: 2000-1410) MT8222A-033: cdmaOne and CDMA2000 1xRTT Over The Air (OTA)**** MT8222A-034: EVDO Over the Air (OTA)**** MT8222A-035: W-CDMAHSDPA (OTA)**** MT8222A-037: Mobile WiMAX Over The Air (OTA) Measurements MT8222A-038: TD-SCDMA Over The Air (OTA) Measurements MT8222A-040: GSMGPRSEDGE RF Measurement MT8222A-041: GSMGPRSEDGE Demodulation MT8222A-042: CDMA RF Measurements MT8222A-043: cdmaOne and CDMA2000 1xRTT Demodulator MT8222A-044: W-CDMAHSDPA RF Measurement MT8222A-045: W-CDMA Demodulation MT8222A-046: Fixed WiMAX RF Measurement MT8222A-047: Fixed WiMAX Demodulation MT8222A-051: T1FT1 BERT (Bit-Error-Rate-Tester)** MT8222A-052: E1-2 Mbs Bit-Error-Rate-Tester (BERT)** MT8222A-053: T3T1FT1 BERT (Bit-Error-Rate-Tester)** MT8222A-060: TD-SCDMA RF Measurement MT8222A-061: TD-SCDMA Demodulation MT8222A-062: EVDO RF Measurements MT8222A-063: EVDO Demodulator MT8222A-064: DVB-TH Digital Video Measurement MT8222A-065: W-CDMAHSDPA Demodulation*** MT8222A-066: Mobile WiMAX RF Measurements MT8222A-067: Mobile WiMAX Demodulator MT8222A-090: Gated Sweep MT8222A-0419: PIM Analyzer (requires PIM Master™) MT8222A-0541: LTE RF Measurements MT8222A-0542: LTE Modulation Measurements

• Armature Diameter7.9 in
• Armature MaterialMagnesium (M)
• Effective Armature Mass13.2 lb

Load attachment inserts with Metric and American threads PCD insert patterns to match existing jigs and fixtures Armature frames in Magnesium or Aluminium Motorized Shaker Body Rotation System Enclosed Air Inlet and Outlet Ducts Air Isolation Mounts Air Glide Casters Unibase Slip Tables Standalone Slip Tables Slip Tables to any Size and Shape Additional BT Series journal bearings Thermal Barriers for use with Climatic Chambers Slip Plates in Magnesium or Aluminium Gun Drilled Slip Plates for low temperature applications Head Expanders and Vertical Support Platforms Customized Fixtures -Cube, L type and T type Auxiliary Interlock Unit for additional safety Interlock Remote Control Panel via RS485 data communication

• Frequency Range3.3 GHz to 20 GHz
• ModelS820C

The Anritsu S820C Microwave Site Master and Antenna Analyzer is the most accurate and convenient tool available for field installation, verification, troubleshooting and repair of microwave communication systems. Difficult test specifications become easy to verify. The S820C improves quality and reduces maintenance expenses by providing vector corrected measurements via calibration and a convenient user interface. Microwave Site Master targets microwave site installers, point-to-point operators, point-to-multipoint operators, radio manufacturers, PCSCellular operators, utility companies and privatepublic networks that support microwave links. These microwave Site Master models test both waveguide and coaxial cables more conveniently than laboratory sized scalar analyzers or microwave test sets. Accurately tests coaxial cablewaveguide transmission line and antennas Tune mode for waveguide component alignmenttesting Superior immunity to live site RF interference Clearly defined user interface for coaxial cable and waveguide media Pop up menus for cable list, waveguide list and compatible flange list Quickly select cablewaveguide type and test parameters without setup error Large, high resolution display allows for easy viewing and trace interpretation under a variety of conditions

• Model NumberMW82119A
• Small Size350 mm x 314 mm x 152 mm

• Model Number700LC
• Dimensions19 x 18 x 12in (500 x 457 x 305mm)

Rugged, reliable construction suitable for field use Integrated polycarbonate transit case Simple to operate touch screen interface Fully configurable frequencies, powers and IM product Spectrum analyzer mode Internal report generation

• Frequency Coverage25 MHz to 20 GHz w/ optional extension down to 2 MHz
• ModelS820D

The Anritsu Site Master S820D covering 25 MHz - 20 GHz, is the most accurate, reliable and convenient microwave transmission line and antenna analyzer available for installation, verification, troubleshooting, and repair of microwave communication systems. The Anritsu S820D is an ideal "anytime, anywhere" solution designed for the rugged challenges faced by field technicians working with wireless and defense communications systems. Standard measurement capabilities includes VSWR, return loss, cable loss, and distance-to-fault (DTF) analysis using industry-leading frequency domain reflectometer (FDR) technology. Patented RF interference rejection enables accurate measurements in the presence of high RF activity. Both coaxial and waveguide connections are supported. Line Sweep Tools (LST) is a free data analysis software utility that enables assessment of system trends, problems, and performance in addition to professional report generation. Frequency Coverage: 25 MHz to 20 GHz w optional extension down to 2 MHz Standard TFT daylight viewable color display Real-time measurement speed Real-time DTF calculations Features Frequency Domain Reflectometry (FDR) Technology - find cable and connector faults often missed by inferior Time Domain Reflectometer (TDR) solutions Only handheld product that supports waveguide True 2-port cable loss measurements for long microwave cable applications Power monitor offers power measurements in the field GPS receiver provides precise location information to overlay on measurements Handheld, battery-operated design Lightweight at only 5 lbs. (including battery) Superior Immunity to RF interference Locate long range problems with 517 data points Multilingual user interface; English, French, Chinese, Japanese, Spanish, German Saves 21 Measurement Test Set-Ups Saves up to 200 Measurement Traces Clearly defined user interface for Coaxial cable and Waveguide media Pop-up menus for cable list, waveguide list, and compatible flange list Quickly select cablewaveguide type and test parameters without setup error Alphanumeric Labeling of Saved Measurements Automatic Time and Date Stamp of Saved Data Rechargeable, Field Replaceable Battery Distance Measurement in Feet and Meters 6 Markers, Limit Lines, and Segmented Limit Lines

• Model NumberS361E

To keep up in today's rapidly evolving wireless communications market, you need tools that enable you to efficiently maintain legacy networks in addition to the new 3G and 4G networks now being installed. And with rate of market expansion, you're being required to service more base stations than ever before. This means completing sweeps quickly, performing calibrations instantly, and implementing fast trace naming while in the field. The S361E Site Master does all this while delivering the ease of use, rich functionality, and best-in-class priceperformance you've come to expect from Anritsu. Designed to handle the most punishing field conditions, the S361E Site Master Cable and Antenna Analyzer dramatically enhances your productivity and transforms the traditional fix-after-failure maintenance model to one that identifies and fixes problems before major failures occur. Cable and Antenna Analyzer: 2 MHz – 6 GHz Return Loss, VSWR, Cable Loss, Distance-To-Fault, Smith Chart, 1-Port Phase Field-proven design: Four-hour battery life, rugged, compact, lightweight, daylight viewable display USB connectivity, built-in touch screen keyboard Intuitive menu-driven touch screen user interface Standard three-year warranty (battery one-year warranty)

• ModelN9912A
• Power Meter9 kHz to 24 GHz U2000 Series USB power sensor dependent

The N9912A FieldFox RF Analyzer is an integrated handheld instrument for wireless network installation and maintenance. It combines cable antenna analysis, spectrum analysis, power meter measurements, vector network analysis, and a vector voltmeter into one rugged, compact, lightweight and weather-resistant package. Standard accessories include ACDC adapter, battery, soft carrying case, user manual and FieldFox Data Link software. Cable and antenna analyzer for return loss, one-port cable loss, distance to fault, line sweeping, and VSWR measurements Handheld network analyzer (S11, S21, phase, and Smith Chart) Handheld spectrum analyzer, optional preamplifier Cable trimming Integrated QuickCal allows you to calibrate FieldFox without a calibration kit, providing worry-free accuracy and repeatability Immediate calibration with FieldFox´s CalReady makes the unit calibration ready at the test port immediately following power-up Broadband calibration with automatic interpolation to eliminate re-calibration of FieldFox when the test frequency or the number of points changes Mechanical open, short, load calibration support

The EM Test ESD NX30 electrostatic discharge simulator is an easy-to-use tester. It consists of a power supply unit and the discharge gun, operated from the discharge gun. It generates electrostatic discharges up to 30 kV in both air and contact discharge mode. The discharge tips can easily be changed. The discharge networks can be easily changed as they are plugged into the discharge gun. The actual discharge network in use is recognised by the controls and indicated in the display. The esd NX30 is either mains supplied or supplied by a DC source. Even battery powered operation is possible. Battery operation becomes relevant for testing e.g. as per DC-11224 or VW TL 824 66, ESD Operating Test, where the ground of the ESD generator is connected to the Field Coupling Plane and the Horizontal Coupling plane but not directly to the Reference Ground Plane. Additionally, a fiber optic link is offered as an option to communicate with the esd NX30 separating the sensitive computer from the test set-up and to avoid ground loops.

• Model Number0627A
• Frequency range560MHz - 2750MHz

The iVA series Cable & Antenna Analyzer is an exciting new product from Kaelus that enables users to accurately measure and locate VSWRreturn loss faults in their RF infrastructure. The wireless connectivity allows unprecedented measurement flexibility and opens up new & important possibilities in sweep testing and multi-port testing.The iVA is a rugged battery operated module that can be remotely controlled with any Bluetooth-enabled tablet, smart phone, laptop computer or any of our iPA series Portable Passive Intermodulation analyzers. Kaelus iVA 0627A Features: Reinventing site certification sweep testing, dramatically reducing test time on site Directly measure insertion loss and isolation when using multiple iVAs. Measure calculated insertion loss with a single iVA and an RF short Accurately measure swept VSWRreturn loss and Distance-to- Fault in RF path Simple and robust Bluetooth connection to a tablet PC or connect with USB or Bluetooth to a laptop computer Connect directly to the device under test; eliminates the need for a phase stable cable in most cases Uses the Kaelus customer-proven iPA reporting workflow & tagging features to facilitate a faster, simpler and more efficient workflow With the Kaelus iPA controlling the iVA, your RL data can be combined with your PIM data into a single report. Reports are combined and completed on-site with no post-processing required Simple to operate, highly intuitive software user interface with the unique ability to generate and complete the test report onsite Geotag each test point, insert a Google Maps® snapshot directly into the report Handy Spectrum Monitor mode for interference checking

• Model1900A
• Receiver Dynamic Range:65 dB, typical

Graphical user interface on touch screen color LCD Rugged, reliable construction suitable for field use Integrated polycarbonate transit case Simple to operate touch screen interface Fully configurable frequencies, powers and IM product Threshold alarm Internal report generation

The Biddle 720350-2 Digital Thermocouple Millivolt Test Set is a portable, lightweight, rugged, and completely self-contained multi-range instrument that measures and simulates up to seven thermocouples in both °F and °C as well as millivolts. The test set provides high accuracy, high resolution and digital readout. Features: Measuring temperature with thermocouples (J, K, T, E, R, S, C, mV). Comparison of working and reference thermocouples. Measuring millivolts from thermocouples or other sources. Calibrating thermocouple-type recorders, controllers, indicators, and other instruments of the deflection, null-balance, or digital type. Calibrating millivolt-type recorders, controllers and indicators. Troubleshooting in thermocouple or millivolt dc control loops.

• ModelMT8212A

The Anritsu MT8212A is an all-in-one, rugged, handheld analyzer for the everyday technician to maintain and troubleshoot wireless base station systems. A single, lightweight, handheld, battery-operated package, the Anritsu Cell Master combines the functionality of a cable and antenna analyzer, spectrum analyzer, power meter, T1 and E1 analyzer. This optimal combination of network test capability eases the job of a network technician by eliminating the need for several independent test instruments, and reducing the number of tools the technician must carry and learn to operate. The Anritsu MT8212A Cell Master is an easy-to-use and rugged solution that has been designed specifically for field-based network technicians and engineers. Menu driven interface and single keystroke functions reduce training for all measurements StoreRecall 25 setup configurations and up to 200 traces Built-in intelligence to ensure calibration is performed correctly FlexCal™ allows troubleshooting cable and antenna systems without multiple calibrations and calibration setups Built-in worldwide signal standards and frequency channels No external power sensor required for power meter measurements Multilingual user interface features on-screen menus and messages in 6 different languages

• Model Number0060A

The iAK is a Passive Intermodulation (PIM) premium test accessory kit that includes all of the necessary components required to validate test equipment operation and perform PIM testing on systems with 7-16 DIN and Type-N connectors.

The Fluke 724 Temperature Calibrator features everything you need to troubleshoot and calibrate temperature. Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant. The Fluke 724 can measure and source 10 thermocouple types and 7 RTD types, plus volts and ohms. It even handles high-speed pulsed RTD circuits and provides loop power. The dual line measuresource display lets you source temperature and view loop current at the same time. With its simple, "no menus" controls, the Fluke 724 is easy to operate, too. Use the measure and source functions to test and calibrate almost any temperature instrument. Easy to read dual display lets you view input and output simultaneously. The calibrator measure RTDs, thermocouples, ohms, and volts to test sensors and transmitters. Perform fast linearity tests with 25-Percent and 100-Percent steps. Execute remote tests with auto step and auto ramp. Power transmitters during test using loop power supply with simultaneous mA measurement. With the 724 you can store frequently-used test setups for later use and the compact, streamlined shape makes it easy to carry. The rugged, reliable design stands up to field use and the backlight lets you work in poor light. Large battery capacity for four AA cells. Includes AC70A test clips, one pair of stackable test leads, TL75 test leads, CE and CSA markings, manuals (English, French, German, Spanish, Italian, Portugese, Korean, Chinese and Japanese), user’s manuals on CD-ROM and NIST- traceable calibration report and data. Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. From industrial electronic installation, maintenance and service, to calibration and quality control, Fluke tools help keep business and industry around the globe up and running.

Here’s an upright unit you’re going to love. It does calibrations up to 650 °C, weighs only eight pounds, and heats up to 650 °C in only 12 minutes—12! This dry-well does everything but get legs and walk to the job for you. (And we’re working on one that does that too.) This four-inch-wide dry-well is amazing. You can control all functions from the front panel or hook it up to your PC with its built-in RS-232 port. And just like the 9140, it works with all of our software. It has three removable well inserts available, an optional carrying case, a NIST-traceable calibration, and the best price in the industry.