Ashtead Technology Rentals

• Power output2 x 48 VDC/24 VDC noise attenuated 6A - 1 x 48 VDC 3A for 2x100Mbps Ethernet - 10 x 24 VDC 2A outputs 2-pole relay - 1 x 110 VAC 2-pole relay output - Software resettable fuses on DC power output - 1200 W available DC power
• Signal interface10 x RS232 - 4 x software switchable RS232/RS485 - 2 x 100 Mbps Ethernet - 2 x Gb Ethernet - 2 x single direction PECL - 3 x HD-SDI - 2 x 5V TTL trigger - All serial and trigger interfaces are isolated
• Topside7 inch Linux based touch screen interface for control and diagnostics - Status for all channels on screen - Voltage and current monitoring and logging - Event logging - Operational hours logged - Web browser based interface for mirrored control - LA
• Power input47-63 Hz, 85-264 VAC - 120-370 VDC

HD, Ethernet, PECL (multibeam) and serial all fitted as standard No need to open bottle to reconfigure Stand-alone fibre optic multiplexer system Shockvibration tested to ISO 13628-6 Robust and well engineered construction Applications Interfaces a large array of sensors and equipment to any ROV

• Weight in air505
• Size505 x 126

Sparse array positioning functionality and self-calibration capability All in one self-contained system, including real-time position computation Decimeter range measurement accuracy Open solution environment: operates with iXBlue and third party transponders Applications High precision AUVROV subsea navigation Subsea construction Metrology Site survey Oil and gas Marine construction Scientific Defense

• Depth rating4000m
• Range capability1000m
• Beam width180º
• Source level - max188 dB

Cymbal channels (500+) HiPAPHPR 400 channels Responder and transponder functionalities Telemetry capabilities SSBL positioning LBL positioning Range measurements between transponders 4000 metre depth rated 180º omnidirectional beam Coated Anodised aluminium housing Internal rechargeable Li-Ion battery On deck battery charger available Takes charge from ROVs 24V External Power; 24VDC (20 - 28V), 1A External onoff function Internal tilt sensor ± 90° Pressure relief valve (safety device) Frequency band 21-31kHz Operating temperature -5ºC to +55ºC

• Scope length3.5 m
• Scope diameter4.0 mm
• IlluminationHigh-intensity laser diode
• ExteriorHigh-durability tungsten braid

Scope Diameter: 4mm Length: 3.5m Stereo Measurement: Yes Image Software: PulsarPic + InHelp Light Source: Built-in Laser Diode Illumination System Output: Image Video Tip Articulation: UpDown, LeftRight (up to 130°) Power: 100 Minute Battery Pack x 2 | Mains Lead | Battery Charger Applications Aerospace Oil & Gas Power Generation Wind Power Process Industries

• Volume13 L (791 in3)
• Weight - without batteriesc5.7 kg (12.5 lb)
• Weight - with batteries6.6 kg (14.5 lb)
• CoolingSSD, 100 GB
• Dimensions (W×H×D)355×288×127 mm (14.0×11.3×5.0 in)

• DisplaySize Segregated Mass Fractions for PM1, PM2.5, Respirable, PM10 and Total. All displayed
• Aerosol Concentration Range0.001 to 150 mg/m3
• Particle Size Range0.1 to 15 µm
• Sensor Type90° light scattering

Desktop Dust and Aerosol Monitor Detects: Dust, smoke, fumes and mists Measures: Both mass and size fraction of PM1, PM2.5, PM10, Respirable and Total PM Concentration range: 0.001 to 150 mgm3 Suitable for outdoor use: Yes – requires environmental case Battery life: Up to 12 hours Applications Industrialoccupational hygiene surveys Indoor air quality investigations Outdoor environmental monitoring Baseline trending and screening Engineering control evaluations Remote monitoring Process monitoring Emissions monitoring Aerosol research studies

• Wind Speed0 to 22 mph (0 to 36 kph)
• Internal Battery Pack12 VDC, 22 Ah
• Operating Temperature32 to 120°F (0 to 50°C)
• Storage Temperature-4 to 140°F (-20 to 60°C)

Environmental Enclosure for the TSI DustTrak 8533 DRX Dust Monitor Supports outdoor monitoring applications: provides protection and security for the TSI DustTrak 8533 when monitoring outside. Can also be used indoors. 360° sampling inlet: designed to sample efficiently in varying wind conditions Water trap: prevents precipitation from entering the instrument Battery life: up to 24 hours (varies depending on set-up) Applications Outdoor environmental monitoring Fugitive emissions monitoring Site perimeter monitoring Fence-line monitoring Dust control operations Environmental research studies Construction sites Harsh industrial environments Urban pollution studies

When working offsite or at a remote location where access to mains power is restricted, you may also need to rent a power generator. Compatible with all of our equipment, the power generators can run for approximately 10 hours and are easy to transport.

If you’re working with equipment that does not have built in memory or the memory isn’t large enough for your reporting requirements, you can rent a data acquisition system. The acquisition systems ensure that data is logged for the duration of your application and is easily transferred onto PC or laptop.

Ashtead Technology stocks ambient air monitors, which are ideal for analysing vapours, pesticide particles and other air contaminants. All instruments meet the EPA specifications and, for your convenience, are available for rental with their specific calibration kits.