Auburn Manufacturing Co.

Auburn is capable of taking any plain gasket material and applying adhesive to one or both surfaces. Auburn’s adhesives are available for all finished parts andor materials; gaskets, shims, washers, electrical insulators, sponge or foam pads, silicone parts, and sheet or roll goods, and tapes. Auburn works with dozens of popular adhesives including double-coated pressure sensitive adhesives, ACR-2®, double-coated acrylic adhesives (PSA), repositionable adhesives, 3M transfer adhesives and 3M VHB tapes. For applications involving silicone sheet, silicone tapes, solid silicone gaskets or silicone sponge gaskets, Auburn offers high-temperature acrylic adhesives rated up to 450° F or silicone adhesives rated up to 500° F. All Auburn adhesives come with an easy-to-remove peel off liner. The use of PSA’s or transfer adhesives has many distinct advantages that include eliminating the messy job of cementing during assembly operations, assuring a uniform amount of adhesive per part, and reducing labor time in assembly operations——. Please contact your Auburn Customer Service Representative for additional technical support, material samples, recommendations andor quotations.

Pressure sensitive electrical tapes and industrial tapes in a wide range of Saint Gobain™ products are available from Auburn. These include silicone foam, silicone sponge and solid silicone, STRIP-N-STICK® Tapes, flexible graphite and copper foil tapes, tapes that are Teflon® coated, fiberglass-impregnated or made of insulating film, such as Kapton® or Polyester. Auburn can slit any Saint Gobain™ Tape to meet your dimensional specifications. Using the correct tapes for their intended applications will provide the necessary balance of electrical and mechanical properties. This ultimately saves time, limits waste and enhances productivity. Electrical tapes are typically used for major winding, layer and lead insulation, lead anchoring.

Flexible, resilient, Silicone Rubber from Auburn has a unique chemical structure which gives it high temperature stability and general inertness unavailable in any other elastomer. Auburn supplies silicone rubber in a wide variety of forms – sheets, rolls, slit tapes, and close-tolerance die-cut fabrications. All thicknesses, grades (MIL-Spec), durometers, styles, and densities of silicone are available from Auburn. Every type of silicone is available either plain (no adhesive) or with a choice of either silicone pressure sensitive adhesive or acrylic pressure sensitve adhesive applied to one or both sides. Learn more about Auburn’s solid silicone rubber, and silicone foam & sponge

Flexible, resilient, Silicone Rubber from Auburn has a unique chemical structure which gives it high temperature stability and general inertness unavailable in any other elastomer. Auburn supplies silicone rubber in a wide variety of forms & sheets, rolls, slit tapes, and close-tolerance die-cut fabrications. All thicknesses, grades (MIL-Spec), durometers, styles, and densities of silicone are available from Auburn. Every type of silicone is available either plain (no adhesive) or with a choice of either silicone pressure sensitive adhesive or acrylic pressure sensitive adhesive applied to one or both sides. Learn more about Auburn's solid silicone rubber, and silicone foam & sponge.

Auburn is a supplier of precision molded rubber parts and all standard and metric O-Rings as well as custom O-Rings. When you come to Auburn, you can choose from a great variety of elastomeric compounds, including Viton™, Buna-N, Neoprene, EPDM, Urethane, Silicone, FDA Rubber, Butyl, Natural, Santoprene™, MIL-spec grades, and more. Manufacturing processes include injection molding, compression molding, and transfer molding; we also do extrusions, lathe cutting, and die-cutting.

Auburn is a supplier of all standard and metric O-Rings as well as custom O-Rings and precision molded rubber parts. When you come to Auburn, you can choose from a great variety of elastomeric compounds, including Viton™, Buna-N, Neoprene, EPDM, Urethane, Silicone, FDA Rubber, Nitrile, and more. Auburn can also supply Standard O-Ring Kits and Custom O-Ring Kits. Auburn specializes in prototypes, and short runs; up to production quantities in the millions. E-mail or fax or call to receive an immediate, free, no-obligation quotation.

Auburn insulators, shields and barriers are manufactured for applications involving switches, timers, lighting fixtures, motors, transformers, electronic instruments, control components, fuse assemblies and more. Auburn has a vast inventory of over 250 different gasket materials to choose from, including dozens of popular insulating materials; fiberboards, polymers, plastics, papers, films, insulating tapes, special moisture-resistant products, UL & CSA certifiable formulations and flame-retardant formulations and high temperature (heat resistant) gasketing. Auburn can further bend, score, fold, sonically weld, andor apply a variety of pressure sensitive or transfer adhesives to any insulation-gasket part andor material. Manufacturing processes include die-cutting, machining, forming, shearing, punching and thermoforming for fabrication of an extremely broad range of finished products.

Every die cut gasket application requires gasket material that is best suited to the particular pressure, temperature, media, electrical, and environmental demands of the application. Auburn offers you the broadest possible range of gasket materials to choose from to meet your specific application needs. Auburn's extensive material inventory, which consists of more than 250 different Gasket Materials, includes Buna-N, felt gasketing, closed cell sponge, fiber, poron®, urethane, silicone sponge, cork-rubber, plastic, solid silicone, viton®, foam, neoprene, felt, kapton®, Accopac®, Impervapac®, Pro-Formance®, Thermo-Tork®, Syntheseal®, our Economical Line, and many more. All of our gasket materials come in a broad range of thicknesses, durometers, colors, styles and densities; and all readily available either plain or with an adhesive backing applied to one or both sides.

Every die cut gasket application requires gasket material that is best suited to the particular pressure, temperature, media, electrical, and environmental demands of the application. Auburn offers you the broadest possible range of gasket materials to choose from to meet your specific application needs. Auburn's extensive material inventory, which consists of more than 250 different Gasket Materials, includes Buna-N, felt gasketing, closed cell sponge, fiber, poron®, urethane, silicone sponge, cork-rubber, plastic, solid silicone, viton®, foam, neoprene, felt, kapton®, Accopac®, Impervapac®, Pro-Formance®, Thermo-Tork®, Syntheseal®, our Economical Line, and many more. All of our gasket materials come in a broad range of thicknesses, durometers, colors, styles and densities; and all readily available either plain or with an adhesive backing applied to one or both sides.

Auburn is a supplier of precision molded rubber parts and all standard and metric O-Rings as well as custom O-Rings. When you come to Auburn, you can choose from a great variety of elastomeric compounds, including Viton�, Buna-N, Neoprene, EPDM, Urethane, Silicone, FDA Rubber, Butyl, Natural, Santoprene�, MIL-spec grades, and more. Manufacturing processes include injection molding, compression molding, and transfer molding; we also do extrusions, lathe cutting, and die-cutting.

Auburn is a supplier of all standard and metric O-Rings as well as custom O-Rings and precision molded rubber parts. When you come to Auburn, you can choose from a great variety of elastomeric compounds, including Viton�, Buna-N, Neoprene, EPDM, Urethane, Silicone, FDA Rubber, Nitrile, and more. Auburn can also supply Standard O-Ring Kits and Custom O-Ring Kits. Auburn specializes in prototypes, and short runs; up to production quantities in the millions. E-mail or fax or call to receive an immediate, free, no-obligation quotation.

Pressure sensitive electrical tapes and industrial tapes in a wide range of Saint Gobain� products are available from Auburn. These include silicone foam, silicone sponge and solid silicone, STRIP-N-STICK® Tapes, flexible graphite and copper foil tapes, tapes that are Teflon® coated, fiberglass-impregnated or made of insulating film, such as Kapton® or Polyester. Auburn can slit any Saint Gobain� Tape to meet your dimensional specifications. Using the correct tapes for their intended applications will provide the necessary balance of electrical and mechanical properties. This ultimately saves time, limits waste and enhances productivity. Electrical tapes are typically used for major winding, layer and lead insulation, lead anchoring.