Automation-Plus, Inc.

The ECM-3000C is a computer controlled marking system capable of marking cylindrical and linear connector products on the same platform. Cylindrical products such as connector bodies or back shells are set on the spindle and rotated while the inkjet printer is triggered. Linear products are positioned on a T-slot table. The print head is rotated 90 degrees with an adapter fitting and is then traversed over the top of the linear device to make the mark. All print head movement and positioning is controlled from the ECS connector marking software. Print head position and rotary speed data are entered on the touch screen or recalled from the database. Message data for the printer can be typed manually

he HMP-1520 Advanced Part marking system was designed specifically for aerospace product identification. The system can mark parts as small as fasteners to as large as wing spars from the same platform. The working part of the system couples an industrial inkjet printer to our AS-1000H Handheld transport device. The AS-1000H provides motion of the inkjet print head across the product to create the identification mark. The print head does not touch the product which allows the mark to conform to the rough or contoured surfaces. Our APS-2000 aerospace parts-marking software with a Windows based computer provides an application tailored to the Part Mark requirements of the Aerospace Industry.

The JETMARK 2000 ER is a 2-axis inkjet printing system that is designed to mark multiple products in a single setup, or to print multiple messages on a single part. By using an extend-retract motion, the print head is only over the product during marking, enabling unobstructed part or fixture load and unload. Printing can occur in either the X or Y direction depending on print head orientation. The base system offers a 15" x-axis travel with a 6" y- axis reach, however different travels can be provided. Various software options are available depending on user requirements Fixed spacing - single message Fixed spacing - multi-line message Multiple messages at various x-y locations* Large character andor graphics produced by stitching print passes together* The system is provided as a table top mount, but a cart mounted option is available that provides a mounting for the printer and computer controller if required

• Overall Length14 in
• Compatible Diameter8 in
• Angle of Rotation0-90
• Compatible Height6 in
• Overall Width14 in

• Overall Height8 in
• Power120 VAC 2 Amps
• Overall Width18 in
• Standard HardwareFoot switch included Printer trigger cable included Tool plate included - attachments optional
• Overall Length24 in

• AC Voltage Rating115 V 230 V
• Frequency50 to 60 Hz
• Power Rating40 W
• Speed0 - 8 ”/Sec
• Stroke Length0 to 2 in 0 to 4 in 0 to 6 in

The JETMARK I Traverser is a family of short range extend-retract motion controllers designed for inkjet printing on stationary products. The end adapter can accommodate CIJ, HP cartridge or other DOD printers. The unit is available in three stroke lengths 0 - 2", 0 - 4", and 0 - 6". The traverse speed is adjustable from 0 - 8"sec. The JETMARK I is actuated by any dry contact closure. When activated the controller will provide an 0 - 30 VDC output trigger to the inkjet printer and start the in-out motion. The trigger will be held on until the end of the return stroke. The system comes complete with motion actuator, controller, adjustable mounting stand, 12' trigger cable, and foot switch with a 6' cord.

INKJET part marking offers the flexibility of quick data changes when marking a variety of products in small lots. However, for an inkjet printer to work either the part or the print head must move. The AS1000H functions as a transporter to move an inkjet print head past a product at a fixed speed while applying the part mark . The unit can be operated as a handheld which allows an operator to mark large or small parts within a 15 foot radius of the printer. The AS1000H can also be mounted to a fixed arm to supply a stationary transport. In the fixed mode, the part is held in front of the AS1000H while the operator triggers motion with a foot switch. With two free hands the operator can easily position ...

• Power120 VAC 2 Amps
• Transverse LengthSingle Speed - 3.5 in
• Cycle TimeIn/Out - 1.2 s
• Standard COLOURLow voltage DC controls on traverser Isolated switch start Dry contact Printer Trigger
• Output Trigger Voltage Range0 - 30 V

• Display2.5" full-color LCD with LED backlit
• Operation MenuDigital Menu Selection (DIMS) for easy operation
• Input DevicePocket-size IR remote keypad
• Plug-n-Print DesignHewlett-Packard TIJ 2.6 printing technology
• LED Indicators5 Indicators : Alarm, ink low, Print, Run, Remote on/off

The world's most compact mobile printer. It's ultra portable, lightweight, and easy-to-operate! Capable of printing anywhere, at any angle, without ink leakage.

• Industry FocusAerospace
• AC Supply Voltage120 V

larger image The HMP-1510 Advanced Part marking system was designed specifically for aerospace product identification. The system can mark parts as small as fasteners to as large as wing spars from the same platform inkjet print head in . However, bringing large products within the reach of the marker's umbilical was difficult, and moving the part marker where it was needed required electrical and air connections. The Power Cart addresses this by supplying its own power. Using AGM rechargeable batteries , the HMP-1510 system with a fixed battery pack unit can operate up to 8 hours before recharging. The onboard invertercharger allows the system to recharge at any convenient 120 VAC outlet during use to extend battery operation. Using the optional dual battery pack allows 12 hour operation on one pack while the other pack charges in the change station. The cart aligns and locks into the change station where the battery packs are pulled on and off using rollers. Plunger pins safely hold the packs in place on the cart and in the charge station.