CleanerBlast Solutions, LLC

• Dimensions• 35” wide • 70” long • 53” tall

OVERVIEW: CleanerBlast Gen II 7.6 cu ft Capacity • Required air compressor size: 200 – 500 CFM @ 100 psig of compressed air • Grit Holding Capacity – Blast Pot: (5.5 cu ft available for grit 1.1 cu ft additional is for water) • Fresh water storage: 110 US Gallons Features • 7.6 cu.ft. ASME certified custom blast pot - powder coated inside & out • Protective pot-fill guard ring with grit level test port • Durable powder-coated exterior finish • Duplex pneumatic & 12vdc electric deadman controls • Single Emergency Stop switch with STOPRUN annunciators; operates both pneumatic or electric deadman conrol • Dual Pumps - Separate & Independent pumps for filling vs blasting • Direct Injection wash down feature with near instant response • Pinch-to-rinse wash down logic saves BIG on slurry hose ball valve wear. • Color coordinated control tubing for effortless trouble shooting Structure • Heavy Duty structural steel skid with heavy wall ¼” thickness square and rectangular tubing • Reinforced water tank mounting struts • 4” x 10” Fork pockets • Engineered Lifting Eyes Dimensions • 35” wide • 70” long • 53” tall Weight • 1200# Dry Tare Weight • *2900# Operational weight – Estimated Average *NOTE: Operational weight determined using available capacity of 5.5 cu ft. of garnet blasting media. (Average wt. of 130#cu ft for garnet x 5.5 cu ft =715# + 110 gallons of fresh water x 8.33#gal = 916#.) (1200# tare + 715# garnet + 916# water = 2813# total.) Consumption • Grit 1-2 cu ft hr average • Water - Blasting - approximately 1 quart minute or 15 gallons hr – (finer grits use less water) • Water - Rinsing - approximately 2 quarts minute • Compressed Air – 200-500 cfm @ 100 psig continuous (blast hose and nozzle size must be properly sized according to the available air compressor cfm. Included Accessories 50’ x 1 ¼” ID 2-ply blast hose with hose coupling and nozzle holder 50’ 316” twinline pneumatic deadman hose #8 high-performance nozzle (Other nozzles available for substitution) Optional Accessories 50’ sections 316” twinline hose extensions 50' 1¼" ID 2-ply blast hose extensions w coupling adapters on both ends Additional nozzle sizes and styles The CleanerBlast™ Machine, is a revolutionary, safe, simple and effective alternative to most sand blasting and surface preparation practices. Discover dust free contained blasting that only consumes 5 to 10 percent the equivalent amount of abrasive grit compared to traditional dry blast systems. Less consumption means safer, less material costs, less disposal costs, less mess to clean up, less labor to pay and more profits.