Griplock Systems, LLC

• FinishingBright nickel-plated
• FOR CABLE DIAMETERS1/16″, 5/64″, 3/32″
• SeriesDG-TNS-JU-APLT-SAT

Adjustable tensioner holds cable at any angle. Anchor Plate screws or bolts to structural surface. Satin-chrome finish. For use with 116″ – 332″ 7×7 or 7×19 aircraft cable. Note: Requires Allen wrench or similar tool to adjust tension.

• Cable Lengths24, 60, 120, 180, 240

Aircraft Cables & Fittings are available as either galvanized or stainless steel. Use the information below to create the part # for the cable you need. Use the Weightload Chart to make sure the cable and gripper are compatible. Griplock® cable assemblies are available in 7×7 or 7×19 galvanized or stainless, medium-to-high tensile strength aircraft cable. These assemblies are factory fitted with a variety of die-cast zinc, swaged aluminum, swaged copper or swaged steel terminals. Unless specified, Griplock terminals are guaranteed to the full published break-strength of the cable, however, when used in conjunction with grippers, cables will have a break strength that is less than the break strength of the cable alone. Please refer to the Installation and Weight Load Guidelines.

• SeriesDG-CC-JU-SAT
• FINISHSatin chrome-plated

• CABLE EXITBottom Exit
• STYLEHooks & Rings
• Series10-HA
• Number Of FlowerSilver
• FOR CABLE DIAMETERS1/32″, 1.0mm

• FinishingBright nickel-plated
• FOR CABLE DIAMETERS1/16″, 5/64″, 3/32″
• SeriesDG-TNS-JU-SAT

Adjustable tensioner holds cable at any angle. 14-20 Base Plate screws or bolts to structural surface. Satin-chrome finish. For use with 116″ – 332″ 7×7 or 7×19 aircraft cable. Note: Requires Allen wrench or similar tool to adjust tension.

• FinishingSatin chrome-plated
• Storage ConditionFlat Ceilings
• SeriesDG-25-CPLT

3-part assembly. Anchor Plate screws or bolts to structure. Satin chrome finish. For use with 116″ – 332” 7×7 or 7×19 aircraft cable only.

• Storage ConditionFlat Ceilings

Cable Coupler holds terminal end of cable. Base Plate & Anchor Plate screws or bolts to structural surface. Satin-chrome finish. For use with 7×7 or 7×19 aircraft cable up to 332″.STYLE Flat Ceilings COLOR Silver FINISH Satin chrome-plated

• SeriesDG-TRACK

DG-TRACK: Ceiling Track Extruded Aluminum Track 80″ Length 4 Track Clips Included per Track Series DG-TRACK

• Storage ConditionFlat Ceilings
• SeriesDG-25Z-APLT

4-part assembly with Gripper for 332″ cable, side-exit module, base plate and anchor plate. Satin chrome finish. For use with 564″ – 332″ 7×7 or 7×19 aircraft cable only. STYLE Flat Ceilings COLOR Silver FINISH Satin chrome-plated

• THREAD SIZE1/4-20 UNC
• STYLE3-Part, Threaded, Sloped Ceilings
• FOR CABLE DIAMETERS5/64″, 3/32″
• SeriesCC-1420-SL3.0-T2

• FinishingSatin chrome-plated
• Storage ConditionFlat Ceilings
• SeriesDG-TNS-CPLT

Adjustable tensioner. 14-20 Base Plate screws or bolts to structural surface. Cover plate is decorative only. Satin-chrome finish. For use with 564″ – 332″ 7×7 or 7×19 aircraft cable. Note: Requires Allen wrench or similar tool to adjust tension.

• SeriesDG-CC-JU-APLT
• Storage ConditionSloped Ceilings

• Storage ConditionFlat Ceilings
• SeriesDG-25-SAT

Two part Gripper. 14-20 internal threaded base plate. Satin chrome finish For use with 564” – 332” 7×7 or 7×19 aircraft cable only.STYLE Flat Ceilings COLOR Silver FINISH Satin chrome-plated