Jameson Corp.

United States

• ModelHUSKIE ECO-EZ

HUSKIE ECO-EZ The ECO-EZ Streamline compression tool has a powerful 6 ton output. When ordering, choose from any of the six available heads that meet your needs which will be installed at the factory. If multiple jaws are needed they can be replaced fairly simply by removing the snap ring on pin. The swivel head design allows the jaws to rotate to 180° for operator convenience. No need for another battery system. This tool operates on the same 14.4 volt battery used in all of the Huskie ROBO Tools. Just like the rest of our battery tools, energized lines will not effect the operation or performance of the tool. FEATURES

• MODELHUSKIE CH-94

HUSKIE CH-94 The NEW CH-94 is a Lithium Ion only charger able to charge the BP-80 and the NEW BP-82 & BP-84 Huskie Tool Batteries.During its 1 hour charge time, the CH-94 monitors battery temperature and battery voltage for correct charging.; The design of the charger allows for stability while in motion by allowing the battery to be clipped in place.It also has completely re-designed contacts for a stronger engagement with the battery terminals.

• Model NumberHUSKIE CN-58H

HUSKIE CN-58H The CN-58H remote operated “C” head requires an external pumping source of 10, 000 psi. It accepts Kearney “O” type and Burndy “W” type dies. It is a service entrance compression tool and the smallest of our compression tool line. The head is lightweight for easy handling in hot stick applications. The tool is supplied with a 38” male screw type coupler and a carrying case.; NOTE: When using any of these high-pressure tools, always use 10, 000 psi rated non-conductive hose (NC-16 series).

• MODELHUSKIE CN-258

HUSKIE CN-258 Huskie’s CN-258 is used for service entrance connections up to 40, and its bypass cartridge assures all compressions. A two-stage, rapid advance pumping system saves compression strokes and time. The nest dies are D-3, and can be changed with other Kearney “O” type dies. If you wish to use Burndy “W” type dies, simply slip the “W” type over the D-3 nest die and snap them into the locked position. Huskie Tools carries a wide range of market equivalent dies. Pressure can be checked with Huskie’s PG-15 pressure gauge. The tool comes complete with a carrying case.

The BP-82 is a NEW 2.0Ah battery pack designed to replace the BP-80 with a smaller, more compact size for use with the ECO-series in-line tools. Due to the use of different cell technology, the BP-82 has the same cycle life as the BP-80, yet it is half the size. With a redesigned housing that has integrated cell supports, as well as conformal coating on the circuit board to protect against corrosion in damp environments, the BP-82 is a more robust battery pack than ever before.; The BP-82 will be included as the standard battery pack with all the ECO-series tool kits, and will also be available to purchase as a replacement battery pack for any other; REC-series products.; The BP-82 can be charged with any of the Huskie Lithium Ion chargers, including the CH-80, CH-90 & CH-94.

HUSKIE EP-60WA The EP-60WA is the lightest single acting 60 ton press in the industry that is designed to compress sleeves and lugs on ACSR and ACAR transmission and distribution cables. They are also ideal for substation construction and are operable from any 10, 000 psi pumping source with proper oil capacity. These tools are made to be portable for easy maneuverability, unlike other brands.; The EP-60WA can be operated, utilizing the oblong lifting ring with use of a lifting rig. The EP-60WA series will readily accept any shell type dies currently used with Alcoa or Burndy 60 ton presses. Dies not listed can be made to specification; consult Huskie for more information.; The EP-60WA series is also offered in titanium. Titanium has the strength of steel but weighs nearly 30 percent less. Due to its lighter weight and the tool’s portable design, the chance of back and muscle strain is greatly reduced. The titanium 60 ton press is easily maneuvered where heavy steel presses are almost impossible to operate, making it an ideal tool for jobs such as helicopter line installations.; NOTE: When using any of these high-pressure tools, always use 10, 000 psi rated non-conductive hose (NC-16 series). FEATURES Designed for ACSR & ACAR Transmission and Distribution Cable Lightest 60 Ton Presses in the Industry Ultra Light Titanium Model Available Extremely Portable Other Specifications

• MODELHUSKIE EP-60D

HUSKIE EP-60D The EP-60D series is a double acting model. Double acting tools will eliminate the possibility of the tool jamming. Double acting means hydraulically advancing the ram to build the proper tonnage, then the hydraulic pressure is reversed to retract the ram. This will ensure the ram to retract without having to pry the jaws apart to release them and it will also retract much faster than single acting spring release tools.; Titanium has the strength of steel but weighs nearly 30% less. Due to its lighter weight and the tool’s portable design, the chance of back and muscle strain is greatly reduced. The titanium 60 ton press is easily maneuvered where heavy steel presses are almost impossible to operate making it an ideal tool for jobs such as helicopter line installations.; NOTE: When using any of these high-pressure tools, always use 10, 000 psi rated non-conductive hose (NC-16 series). FEATURES

• Model NumberHUSKIE BP-84

The BP-84 is a NEW 4.0Ah battery pack designed to replace the BP-80. A new cell pack design and circuitry make the BP-84 the most powerful battery in the Huskie line. Using state of the art circuitry to monitor and control the battery pack, it has been designed to be the most efficient battery with the longest run times that Huskie has ever offered. The LED display gives you remaining battery life in 20% increments.With a redesigned housing that has integrated cell supports as well as conformal coating on the circuit board to protect against corrosion caused from damp environment, the BP-84 is a more robust battery pack than ever before. The BP-84 can be charged with any of the Huskie Lithium Ion chargers including the CH-80, CH-90 & CH-94.High Capacity 4.0Ah Battery Pack 50% Longer Run Time as Compared to NiCad No Memory Effect Lightweight Battery Pack Impact Resistant Housing Performance is Minimally Affected by Extreme Temperatures Minimal Self-Discharge Non-Hazardous Chemistry and Environmentally Safe Recyclable with the RBRC Recycling Program 5 Year Warranty