Kinex Cappers, LLC.

Torque Range of 0 - 50 inch pound (0 - 6 Nm) Clockwise & Counter-clockwise digital torque capture Highly Portable: molded carry handle and compact, lightweight design Easy Export of Results: to a PC, printer or dataloging device via intergrated RS232 port Rugged Water Resistant Case rated to IP54 Plug into an outlet or use the on board battery Includes a Certificate of Calibration

Are the same as standard chucks except they have a secondary cavity that allows them to tighten caps with external features such as sports caps, mist spray caps, yorker caps, dropper caps, and many more. Deep well chucks provide excellent flexibility as they tighten standard flat caps as well as they tighten caps with external features. Our deep well chucks come in five sizes to fit caps ranging from 14mm - 37mm in diameter. Each chuck size will work with a particular cap range. It may be necessary to purchase additional chucks if you will be tightening multiple cap sizes.

The Foot Pedal Activated Base perfectly centers the bottle in preparation for capping and holds the bottle to prevent it from spinning during the capping process. The four continuously adjustable grippers can be set to center and hold any bottle regardless of its shape. It is an optional replacement for the standard base used with the SA™ and PumpCap™ Capping Machines. The foot pedal Activated Base allows for complete hands free operation of the capping machine which increases the speed and productivity of the capping process. It accommodates bottles up to 6.33 inches in diameter and is constructed of 304 stainless steel and hard coat anodized aluminum for outstanding corrosion resistance.

The Lever Activated Base perfectly centers the bottle in preparation for capping and holds the bottle to prevent it from spinning during the capping process. The four continuously adjustable grippers can be set to center and hold any bottle regardless of its shape. It is an optional replacement for the standard base used with the SA™, ES Table Top™, and PumpCap™ Capping Machines. The Lever Activated Base is particularly well suited for use with very short or narrow bottles. Very short containers are difficult to hold during the capping process. There is very little space for the operator’s hand to hold the container without being very close to the cap when the machine is tightening it. The Lever Activated Base holds the bottle firmly and allows the operator to remove their hands from the capping area while the cap is being tightened. The Lever Activated Base works with bottles up to 6.5 inches in diameter. It is constructed of 304 stainless steel and hard coat anodized aluminum for outstanding corrosion resistance.

The Dual Push Button Activated Base perfectly centers the bottle in preparation for capping and holds the bottle to prevent it from spinning during the capping process. The four continuously adjustable grippers can be set to center and hold any bottle regardless of its shape. It is an optional replacement for the standard base used with the SA™ and PumpCap™ Capping Machines. Dual push buttons are considered safeguarding devices. The two push buttons must be depressed simultaneously to initiate the capping process, ensuring that the operator’s hands are removed from the capping area during the capping process. The Dual Push Button Base accommodates bottles up to 6.33 inches in diameter. Constructed of 304 stainless steel and hard coat anodized aluminum for outstanding corrosion resistance.

The Bottle Activated Backstop includes a built in switch that initiates the capping process when the bottle is pressed against it. It eliminates the need to depress a foot switch or dual push buttons and as a result increases the speed and productivity of the capping process. The Bottle Activated Backstop includes the EZ Slide Base. The EZ Slide™ Base features a plastic coated stainless steel grill. The grill provides a low friction surface that allows bottles to slide over the base easily and enables the operator to quickly center the bottle in preparation for capping. The stainless steel grill is spring loaded. Within the slots of the grill are strips of an extremely high friction rubber. The downward force generated during the capping process pushes the spring loaded grill down and pushes the bottom of the bottle firmly against the strips of rubber. The rubber strips are highly effective in preventing the bottle from spinning during the capping process. If the strips do not completely prevent the bottle from spinning during the capping process, only the slightest of assistance from the operator is required. The Bottle Activated Backstop with EZ Slide Base accommodates bottles up to 6.50 inches in diameter and is constructed of 304 stainless steel and hard coat anodized aluminum for outstanding corrosion resistance.

The EZ Slide™ Grll is a plastic coated stainless steel grill. The grill provides a low friction surface which allows bottles to slide over the base easily and enables the operator to quickly center the bottle in preparation for capping. It is particularly helpful with large or heavy bottles that can otherwise be cumbersome to position for capping. The stainless steel grill is spring loaded. Within the slots of the grill are strips of an extremely high friction rubber. The downward force generated during the capping process pushes the spring loaded grill down and pushes the bottom of the bottle firmly against the strips of rubber. The rubber strips are highly effective in preventing the bottle from spinning during the capping process. If the strips do not completely prevent the bottle from spinning during the capping process, only the slightest of assistance from the operator is required.

Fit your SA™ benchtop capping machine with a 316 stainless steel capping head. 316 Stainless steel is the material of choice for use in laboratory, pharmaceutical, sanitary and sterile packaging environments because it is easy to clean, resistant to corrosion, and is chemically resistant to the cleaning agents commonly used in these environments. In addition to their 316 stainless steel construction, ST™ capping heads include other features that make them ideal for use in clean settings. The internal components of an ST™ capping head are lubricated with NSF-H1 Food Grade Certified lubricants. The Kinex Exhaust Capture System™ is integrated into the design of every ST™ capping head. As an option, the ST™ capping head can be built with one of our oil free pneumatic motors.

Adjustable Sliding Arms can be added to the Backstop of the standard base to allow for easy centering of a square or rectangular bottle under the capping motor in preparation for capping. The arms are attached to the two grooves that run parallel to the V-shape of the Backstop. The arms can be positioned anywhere along these grooves to accommodate any square or rectangular bottle up to 8.5 inches in width. The arms are available in 2, 3, 4 and 5 inch lengths.

Equip your SA™ Capping Machine with an optional oil free pneumatic motor. Just as the name suggests, our oil free pneumatic motors do not require lubrication. An oil free pneumatic motor can be installed in an ST™ capping head and a standard SA™ capping head. Standard pneumatic motors cannot be used in many clean environments because they expel a tiny amount of lubrication in their exhaust. Although the amount of oil they expel is so minimal that it is completely imperceptible, it is still not suitable for a clean environment. Since our oil free motors require no lubrication, the exhaust air exiting the machine is as clean as the compressed air going into it.