Nucor Building Systems

Daylighting with Prismatic Skylights is the controlled admission of natural sunlight into your building using diffused skylights, in conjunction with energy-efficient lighting and a daylight-responsive lighting control system, maximizing your energy savings. Ideal for nearly any application, daylighting with prismatic skylights significantly reduces the need for electric light, which will save significantly on energy costs.

The Ecospan® Composite Floor System is an economical, innovative method of providing all steel and open web structural components for mezzanines in metal buildings. Easy to install, Ecospan mezzanines incorporate the benefit of open web configuration with maximum joist spacing that provides more vertical space allowing for design and installation flexibility of the HVAC and electrical systems within your building.

Nucor Building Systems offers a full line of insulated metal wall panels and insulated metal roof panels that embody attractive styling and cutting edge energy efficiency. Designed with the latest scientific breakthroughs, our panels are lightweight, durable and still maintain their ease of installation and visual appeal with a wide range of available colors options that all use cool coating technology. Now is the best time to build with our insulated metal panels because the benefits have never been greater.

Wall systems offered here allow the owner many options for function as well as appearance. All panels shown are available in a range of standard colors. Special colors and gages are available upon request, minimum quantities apply. View a selection of color scheme examples of Nucor Metal Buildings Nucor buildings also interface well with masonry, precast concrete, and tilt-up concrete. To add aesthetic value and improve your energy efficiency, NBS now offers attractive, affordable, and easy-to-install Insulated Panel Systems.

As a custom metal building manufacturer, Nucor produces a wide array of structural systems including clearspan rigid frame, modular rigid frame, tapered beam and lean-to. All are available in standard or long span options. Your Nucor metal building can be designed to virtually any desired dimension to achieve the optimal design solution for your building requirements. Please see our frame types for many of our framing options.

The Nucor CFR system is a raised seam metal roof which is designed to “float” to accommodate thermal expansion and contraction. This is accomplished with concealed sliding clips which allow for up to 3” of expansion and contraction. The panel sidelap has factory applied mastic and can be completely erected without the use of electric seaming machines.

Nucor CFR Translucent Panels are factory assembled with the metal portion of the panel a polyester polar white color. The lighted part can be insulated or non-insulated. They are available for an Underwriters Laboratory (UL) rated roof system only with 5’-0” purlinjoist spacing, however panels are available to fit on 5’-6” or 6’-0” purlinjoist spacing. The UL rating is achieved by simply hand crimping the full length of the translucent panel. No extra framing or materials are required. CFR translucent panels cannot be placed from end to end, eave to eave or at the eave of a building. Recommended distance from the low eave of a building to first translucent panel is 15’-0” (+-). They cannot be placed directly beside another translucent panel. When translucent panels are installed side by side there needs to be a minimum of four CFR panel runs between each unit and four full panels in from each endwall. Space the translucent panels so the full metal panels above, between and below are supported by a minimum of three roof secondary members, preferably four. Do not use the translucent panels as a construction platform. Whenever possible, it is recommended that wall translucent panels be used in lieu of roof translucent panels.

Nucor Ridge Vents come completely assembled for ease of installation. The ridge vents supplied by Nucor are of a low profile design to provide gravity type ventilation. Because gravity ridge vents are designed to allow free airflow, some penetration of water during blowing rains is to be expected. Standard available finishes for the ridge vents are polar white and Galvalume. Other colors may be available at an additional cost. The ridge vents can be used both with Nucor Classic Roof™ and Nucor CFR™ roof systems. Nominal ridge vent length is 10’-0”. They have flat skirts for both Classic Roof and CFR systems and are attached to the major ribs (or end dam on the CFR) with self-drilling screws. Ridge vents are available with 9” and 12” throats. Bird screens are provided as a standard. Nucor metal building ridge vents can be ordered as continuous or single units. Exterior parts are 26 gage painted or Galvalume Interior parts are all made of G90 galvanized steel. The substructure consists of 10 gage saddle straps with interior baffles of 24 gage steel. Lifter arms and damper slides are made of 18 gage steel. Manual operation is through activation of a pull bar which is attached internally to bell cranked type lifter arms connected to the damper with Teflon coated pins through the damper slides. Dampers are spring loaded to remain in the open position until the pull bar is operated and locked in the closed position. Dampers operate in a vertical manner. Each vent is opened by a pull chain that extends approximately 12” below the roof unless noted otherwise on the order documents. Other opening mechanisms are available at an additional cost upon special request. Nucor ridge vents should not be placed closer than 5’-0” to the endwall steel line to allow room to properly flash the building. For example, a 90’-0” long building with ridge vents required the entire length should have no more than (8) units.

Pre-Assembled Walk Door Features Our factory assembled walk door systems include all hardware and the sub-frame (framed opening) for quick installation. They can be installed in under half an hour, with no additional cutting, welding or painting.Walkdoor Pre-assembled and self-framing for ease of installation. No framed opening required if Nucor standard girt spacing is utilized ADA compliant Foam insulated specifically designed for metal buildings Includes aluminum threshold, Kerf Weather Seal and premium door sweep 14ga heavy duty sub jambs for added security Includes top, bottom and intermediate clips and screw package Available in white or brownbronze Shipped in wood crate for protection Large selection of hardware accessory options

Wall systems offered here allow the owner many options for function as well as appearance. All panels shown are available in a range of standard colors. Special colors and gages are available upon request, minimum quantities apply. View a selection of color scheme examples of Nucor Metal Buildings Nucor buildings also interface well with masonry, precast concrete, and tilt-up concrete. To add aesthetic value and improve your energy efficiency, NBS now offers attractive, affordable, and easy-to-install Insulated Panel Systems.