Process Technology

• Size1.5 ft2 (.14m2), 2.5 ft2 (.23m2), and 3.5 ft2 (.33m2) of exchange area.
• Temperature range-50°C(-60°F) to 250°C (480°F)

For virtually any wet chemistry application. FEATURES Ideal for one-pass cooling of chemicals dumping to waste stream and innovatively eliminates high costs associated with water aspiration. Less surface area required for same BTU exchange compared to most other fluoropolymer exchangers. Heavy wall, large diameter tubing improves circulation and minimizes pressure drop.

• Flow Rate1 LPM (.25 GPM) to 200 LPM (50 GPM)
• Temperature Accuracy+/-0.3° C, depending on operating conditions

• watts500 - 9000 watts

Excellent chemical resistance to aggressive acids. FEATURES PTFE sleeved 304 stainless elements inert to most solutions up to 212°F (100°C). Low watt density design 10 wattssquare inch (1.5wcm²). Vapor resistant, flame retardant polypropylene terminal enclosure with 3 ft (.9m) flexible PVC liquid tight conduit. Grounded internal metal element and built in thermal protector. Replaceable P1 protector standard for solutions up to 180°F(82°C). Certification: cULus (except 600 volts)

• Temperature Range-40°F (-40°C) to 999°F (538°C).

Provides precise control for consistent plating and etch rates in most aqueous processes. FEATURES Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Vapor resistant, NEMA 1, IP21, gasketed 18 DIN plastic enclosure with sealed tactile switches and stainless steel hardware. Certifications: cULus and CE compliant.

• capacity500 mA switch capacity (10 mA minimum).
• temperature range0°F (-18°C) to 176°F (80°C).

Provides automated control and consistent liquid levels for most aqueous processes and waste treatment tanks, or when leak detection is required. FEATURES Helps protect against fires and tank damage associated with low-level conditions. ESP model: mounts on the outside of plastic tanks and senses up to .984 inches (25mm), so no direct immersion is required. ESPV model: for direct immersion applications (vertically mounted). Certifications: cULus and CE compliant.

• volts120 - 480 volts
• watts500 - 4000 watts

• temperature range-40°F (-40°C) to 999°F (538°C).

Provides precise control for consistent plating and etch rates in most aqueous processes. FEATURES Large (.56” high), easy to read LED display. Fluoropolymer (FEP) covered 10-foot (3m), 1000-ohm platinum RTD sensor included standard with the control. Vapor resistant, NEMA 1, IP21, gasketed 18 DIN plastic enclosure with sealed tactile switches and stainless steel hardware. Certifications: cULus and CE compliant.

• pressure100 PSI working pressure (steam or water).

Designed for the high demands of corrosive chemical heating or cooling. FEATURES Heavy wall, 20-gauge metal tubing available in steel, 316 stainless steel and titanium.. Durable, low profile design for tanks with limited space (except zirconium material). Every inch of coil surface is active exchange area.

• Pressure ratingAxial Circuit A: 230 PSI (1586 kPa or 16 bar), Spiral Circuit B: 360 PSI (2482 kPa or 25 bar)
• Temperature range60°F (-50°C) to 480°F (250°C)

• watts1,000 watts up to 18,000 watts
• Watt Density10 watts per square inch (1.5w/cm2)

Unmatched in Semiconductor process fluid heating. Single chamber sizes up to 18kW FEATURES Ruggedly designed for the most demanding recirculation or single pass chemical applications. Able to achieve the highest temperature heating, up to 210°C. All fluoropolymer wetted surfaces for virtually any wet chemistry application. Thick walled chamber provides long service life in the harshest high temperature applications. Long heater life for reduced cost of ownership (COO): Patented heater gas purge system continuously removes any chemical permeation and ensures long element life. Certification: CE, UL, Semi S2 and S3