R.L. Craig Company, Inc.

Material: Up to 16” X 16” - 16 gauge, 18 gauge mounting frame, over 16” X 16” - 14 gauge door, 16 gauge mounting frame Door: Flush to frame with rounded safety corners Mounting Frame: One piece outer flange welded to mounting frame Hinge: Contiuous, concealed Latch: Stainless Steel screwdriver operated cam latch Optional LatchesLocks: Cylinder lock and key, allen head cam latch, spanner head cam latch Finish: Steel: 5-stage iron phosphate preparation with prime coat of White alkyd baking enamel OR Stainless Steel: Type 304 - #4 satin polish

Material: 18 gauge steel door and frame Door: Flush to frame with reinforced edges Mounting Frame: 1” wide outside flange with 1 716” deep mounting Frame: Knock over mounting tabs provided on 6x6, 8x8, 10x10 and 12x12 Hinge: Concealed Hinge Pin Latch: Stainless steel slot screwdriver operated cam latch Optional LatchesLocks: Cylinder lock and key, allen head cam latch, spanner head cam latch Finish: 5 Stage iron phosphate preparation with prime coat of White alkyd baking enamel

Features RHA & RHG Weather tight construction Convenient one-hand operation 12" high insulated curb Supports 40lbs.sq. ft. live load Optional Features RHA Painted and Anodized finishes Polycarbonate domes for daylighting Louvered Curbs Curb Mounted Units Curb pitch corrected for sloped roof Higher curb heights for "green roof" applications

Safety First Caution is the key when working in high elevations and that is where most roof and ceiling access is found. Acudor Safety Rails are designed for all Roof Hatch applications to assist in making every work space as safe as possible. Features Railing system surrounds all sides of the opening (Self Closing Gate) Spring tension gate keeps the opening closed after pass through Easy to install Assembled on site, no special tools necessary Safe, easy and economic access Standard Finish is Safety Yellow Painted, also available in Galvanized finish

Features RHA & RHG Weather tight construction Convenient one-hand operation 12" high insulated curb Supports 40lbs.sq. ft. live load Optional Features RHA Painted and Anodized finishes Polycarbonate domes for daylighting Louvered Curbs Curb Mounted Units Curb pitch corrected for sloped roof Higher curb heights for "green roof" applications

Material: Aluminum door & frame ; Type 316 Stainless steel hinges & hardware Door: 14" aluminum diamond plate reinforced for live load of 625 poundsper sq. ft. (capable of holding up to 10 ft. head of water) Hinge: Type 316 stainless steel butt hinges with tamper proof stainless steel bolts and nuts. Gasket: 38” neoprene gasket Opening Device: Automatic hold open arm with red vinyl grip allows door to open to 90 degrees, locking door in open position and allowing for easy control when closing door panel. Stainless steel compression springs provide lift assistance. Standard Latch: Type 316 stainless steel pressure lock system and exterior staple for padlock Finish: Mill finish with bituminous coating on exterior frame

All of these safety products are designed to be used with the Acudor Roof Hatches to allow safe use at all times. Telescoping Post designed to provide easy and safe access through Roof Hatches and Floor Doors. Mounts to top rungs of fixed wall ladder with basic tools. Safety Ladder Extension designed to provide easy and safe access through Roof Hatches and Floor Doors. Mounts to cap flashing of Roof hatch with basic tools. TSP-1: Aluminum Telescoping Post. Offers safety accessibility to roof areas through the Roof Hatch opening. Features: Adjustable hardware, installs on any fixed wall ladder. Locks in the upright position and provides the user with a firm grip. Fabricated from Aluminum, will not corrode. Install on a fixed wall ladder as required. Made of aluminum tubing and offers a telescoping section fixed to the ladder. The extended section locks into position allowing for safe egress and ingress off and on a roof. SLE-Y: Safety Ladder Extension. Offers safety accessibility to roof areas through the Roof Hatch opening. Easy to install, bolts to Cap flashing, fabricated from Steel, will not corrode. Powdered Yellow for visibility and Attaches to Cap Flashing and assist easy egress and ingress through roof hatches.

Optional Features RHA Painted and Anodized finishes Polycarbonate domes for daylighting Louvered Curbs Curb Mounted Units Curb pitch corrected for sloped roof Higher curb heights for "green roof" applications Optional Features RHG Stainless Steel cover, curb, andor hardware (RHG) Polycarbonate domes for daylighting Louvered Curbs Curb Mounted Units Curb pitch corrected for sloped roof Higher curb heights for "green roof" applications

Optional Features RHA Painted and Anodized finishes Galvanized steel curb and Aluminum cover Polycarbonate domes for daylighting Louvered Curbs Curb Mounted Units Curb pitch corrected for sloped roof Higher curb heights for "green roof" applications Optional Features RHG Stainless Steel cover, curb, andor hardware Polycarbonate domes for daylighting Louvered Curbs Curb Mounted Units Curb pitch corrected for sloped roof Higher curb heights for "green roof" applications

RHADD Specifications: Cover: Double-skin construction (“in box type design”) with 1" fibreglass insulation and a continuous EPDM foam weatherdraft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs.sq. ft., the cover is 18" thick aluminum. To accommodate the polycarbonate domes, an aluminum extrusion with built in condensation drainage channel is provided. Curb: 18" Aluminum with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes Hinge: Heavy Duty Aluminum pintle hinges with 38" pin Opening: Gas spring operators allow cover to open and close with ease. Inside pull handle allows for easy control when closing cover. Door Latch: Self latching, zinc plated outside T handle with stainless steel inside lock and lever assembly. Unit also has inside and outside padlock provisions. Finish: Mill finish RHGDD Specifications: Cover: Double-skin construction (“in box type design”) with 1" cellulose insulation and a continuous EPDM foam weatherdraft seal gasket that is attached to the inside of cover to provide a flush, tight fit. Designed to support a live load of 40lbs.sq. ft., the cover is 18” thick aluminum. To accommodate the polycarbonate domes, an aluminum extrusion with built in condensation drainage channel is provided. Curb: 14 gauge galvanized steel with 1" thick fiberboard roof insulation at curb exterior. Curb is 12" high, with 3.375" wide bottom flange and pre-drilled mounting holes. Hinge: Heavy duty galvanized steel pintle hinges with 38" pin

All of these safety products are designed to be used with the Acudor Roof Hatches to allow safe use at all times. Telescoping Post designed to provide easy and safe access through Roof Hatches and Floor Doors. Mounts to top rungs of fixed wall ladder with basic tools. Safety Ladder Extension designed to provide easy and safe access through Roof Hatches and Floor Doors. Mounts to cap flashing of Roof hatch with basic tools. TSP-1: Aluminum Telescoping Post. Offers safety accessibility to roof areas through the Roof Hatch opening. Features: Adjustable hardware, installs on any fixed wall ladder. Locks in the upright position and provides the user with a firm grip. Fabricated from Aluminum, will not corrode. Install on a fixed wall ladder as required. Made of aluminum tubing and offers a telescoping section fixed to the ladder. The extended section locks into position allowing for safe egress and ingress off and on a roof. SLE-Y: Safety Ladder Extension. Offers safety accessibility to roof areas through the Roof Hatch opening. Easy to install, bolts to Cap flashing, fabricated from Steel, will not corrode. Powdered Yellow for visibility and Attaches to Cap Flashing and assist easy egress and ingress through roof hatches.