Write a Review
Welcome to Rees, Inc.
Manufacturer / Exporter / Supplier Of Cable Operated Switches, Bi Directional Cable Operated Switch, Rope Operated Sequence Switches, Flat Chrome Plunger Push Button Switches, Larger Mounting Pattern, Double Plastic Plunger with Padlock Latch, Contact Blocks, Combined Selector Push Button Control
Year of Establishment
1972
Primary Business
Supplier
Number of Employees
10-49
These switches are “slack cable” style with ‘Slow-Make’ contacts. The switches are not ‘Positive Transfer’ and they do not latch in any position. They should NOT be used for any Emergency Stop applications. The action of these devices is that when the switch actuating arm is pulled by a cable the switch contacts will change state, that is, the NO will be closed and the NC will go open. When the force on the cable is removed from the actuator arm, spring pressure will return it to its normal position, while the contacts are held in position through a ratchet mechanism. The next time the cable is pulled, the action is repeated with the contacts returned to their original state. The housing and cover are made from a glass filled black polycarbonate. The mounting base and double end actuator arm are die cast from a high strength zinc alloy. All exterior steel components are made from #303 Stainless. Switches are provided with two 12 NPT conduit openings. The total maximum cable length recommended is 200 feet with a maximum interval support of 10 feet. The life of these devices is in excess of 150, 000 mechanical and 1, 000, 000 electrical operations. Each captive terminal on the replaceable block will accept (2) #14 AWG stranded wires and the contact are gold plated to eliminate high resistance tarnishing. These devices can be found on various conveyor installations as well as other stations that require the “pull-on”, “pull-off” function that this being provides. Their rugged construction and long term reliability make these cable switches extremely well suited to function within various industrial environments.
switches are hand operated, control circuit devices, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body, painted with a dry powder paint, is made from die-cast zinc. The plunger head is powder painted or chrome plated die-cast zinc. The plunger head of the 04662 is plastic. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 1, 000, 000 operations. These switches can be found on a variety of machines such as punch presses, press brakes, and spot-welding equipment as “RUN”, “START” or “STOP” buttons. They are also used on transfer machines. The 04662-002 complies with standards for ‘emergency stop’ applications. Their rugged construction and long term reliability make these switches extremely well suited to function within various industrial commercial environments.
each captive terminal will accept (2) #14 AWG stranded wires. Each switch is supplied with a fibreflex gasket which provides an oil tight seal upon installation. For added protection against corrosive environments a neoprene gasket is available as an accessory item by ordering part number 02005-540. There are two ½ “NPT conduit openings. The maximum cable recommended cable length is 200 feet with a maximum interval support of 10 feet. The mechanical life of the switch is 150, 000 operations. This switch can be installed on various conveyor installations and provides a constant access for emergency or normal stopping.
switches are hand operated, lockable, control circuit devices, rated ‘Heavy Duty normally for use with electromagnetic equipment. The bodies are made from die-cast zinc, and painted with a dry powder paint. Each captive terminal will accept (2) #14 AWG stranded wires and the contacts are gold plated to eliminate high resistance tarnishing. Each switch is supplied with mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of these devices is 500, 000 operations. These switches can be found on a variety of machines such as: punch presses and press brakes as “START” and “STOP” or “FORWARD” and “REVERSE” buttons and with material handling equipment as “UP” and “DOWN” or “RAISE” and “LOWER” controls. The rugged construction and reliability of these switches makes them extremely well suited to function within various industrial commercial environments. The padlock slide latches the red plunger in the depressed position.
The following switch is a hand operated, control circuit device, rated ‘Heavy Duty’ normally for use with electromagnetic equipment. The body is die-cast zinc. The chrome plated knob and plunger are also made from die-cast zinc. · Nema 1213, IP 65 Each operator will accept up to three tiers of two contact blocks for a total of six separate circuits. Each operator is supplied with all mounting hardware and a solid neoprene rubber gasket which provides an oil tight seal upon installation. The mechanical life of this unit is 250, 000 operations. A selector-push button operator combines the function of a single push button device with that of a selector in a single unit. Contact operation sequences are selected by rotating the knurled guard in the two available positions. When the position is selected, depressing the plunger will give contact operation as shown in the sequence chart.
Share your thoughts with other customers for Rees, Inc.
Add Review
(Rees, Inc.)
Fremont, IN 46737 map, United States
Share us via
