SIFCO Applied Surface Concepts

• Power Requirements115 VAC, 1Ø, 50/60 Hz, 6 amp
• Rotating SpeedAdjustable from 0 to 500 rpm
• Chuck Capacity152 mm (6 in.) maximum diameter

The SIFCO Process Model N Turning Head will provide years of trouble-free service as a light to medium duty rotating device. The turning head consists of a heavy-duty steel base, supporting a speed control and gear motor assembly with a drive bearing-mounted shaft, grounding bar and chuck. A power takeoff on the motor can be used to drive a Rotary Tool Handle or grinding accessory. Attaching the ROTO-FLO Flexible Shaft to the chuck allows to plate a vide range of ID surfaces. The right angle gearbox is coupled to a shaft supported by two sealed, heavy-duty, self-aligning pillow block type bearings. These bearings are equipped with convenient grease fittings to aid in the maintenance of the unit. A quality steel chuck is attached to a stainless steel back plate mounted on the shaft. This 3 jaw chuck comes complete with internal and external jaws, and a chuck wrench.

• Number of Phases1
• Capacity1.5 gal 6 liter
• Country of Origin115 VAC
• Frequency50/60 Hz

AeroNikl Flow System, Model 75, 6 liter (1.5 gal) 115 VAC, 1Ø, 5060, 9.0 amp One 279 mm x 356 mm (11 in. x 14 in.) One 356 mm x 432 mm (14 in. x 17 in.) Tray Tray with corner drain 19 mm dia. (34 in.) return line

• Length2 5/8 in 66 mm
• Outside Dimension3/16 in 4.8 mm

• Metal Content100 g/L
• Purity of Deposit99.9 %
• Maximum Thickness One Layer375 µm 0.015 in
• DuctilityExcellent

SIFCO Process® plating solutions include AeroNikl®, Cadmium LHE®, copper, nickel, cobalt, gold, silver, tin, zinc, as well as alloys for Babbitt, brass, bronze, cobalt-tungsten, nickel-cobalt, nickel-phosphorous, nickel-tungsten, tin-zinc, zinc nickel and many more. A plating solution family may contain several different plating solutions (formulations) that provide different deposit characteristics (structure, hardness, wear resistence, and corrosion resistance for instance). For example: The silver plating solution family contains both cyanide and non-cyanide formulations; the nickel plating solution family consists of fifteen different formulations and offers a wide variety of performace characteristics.

• pH2.4
• Maximum Thickness One Layer250 µm 0.1 in
• Code5708
• Number Of FlowerAlloy

SIFCO Process® alloy plating solution families include babbitt, brass, bronze, cobalt-tungsten, nickel-cobalt, nickel-phosphorous, nickel-tungsten, tin-zinc, and zinc nickel.

• Length1 9/16 in 40 mm
• Width1 in 25 mm
• Height1 in 25 mm

• Length2 3/8 in 60 mm
• Outside Dimension3/64 in 1.2 mm

• Length1 in 25 mm
• Internal Dimension1 in 25 mm

• Frequency50/60 Hz
• Country of Origin115 VAC
• Number of Phases1

• Volts Output20
• Amps Output15
• Weight18 lb 9 kg