Terpco Industrial Products Co.

• Availability46 lbs 21 kg
• Dimensions6 x 6 x 1 ft 1.8 x 1.8 x 0.3 m`
• Containment Capacity269 gal 1018 L

Stake Wall Model Containment Berms feature a unique design that allows the sidewalls to collapse in either direction and spring back automatically to their upright position! Roll drums over the sidewalls, drive trucks through them, and the sidewalls always return to vertical without assistance. Does not rely on inflation, hinged straps or cumbersome frames to keep sidewalls up. No set-up required – unfold and the sidewalls automatically spring into their vertical position. Helps comply with federal and local stormwater regulations. Custom sizes available. Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

• Containment Capacity748 gal 2831 L
• Dimensions10 x 10 x 1 ft
• Availability70 lbs 32 kg

The Collapsible Wall Model Containment Berm features rugged PVC sidewall assemblies for sidewall support. Simply swivel the “feet” of the PVC supports to lower or raise the sidewalls in just seconds! Custom sizes available. Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

• Size2 x 10 ft
• Approx. Weight50-52 lb

• Containment Capacity179 gal 678 L
• Availability21 lbs 9.5 kg
• Dimensions4 x 6 x 1 ft 1.2 x 1.8 x 0.3 m

L-shaped aluminum brackets provide sturdy sidewall support. Easy assembly – Brackets are quickly and easily inserted into sleeves spaced around perimeter of Berm. No frames, components or excess material outside of sidewalls – excellent for use inside storage sheds and other buildings or structures where floor space is a premium. Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175.

• Size2 in. Pipe

UV Resistant Fabric Cost Effective; Drain Plug Can Be Stored & Re-Used Multiple Times Heavy Duty Construction; Manufactured with FR Foam & Fabric You May Mix Sizes for Quantity Discounts Other Sizes Available on Request

• Length36 in 915 mm
• Width36 in 915 mm
• ShapeSquare
• Availability16 lbs 7 kg

Urethane bottom layer (same as Ultra-Drain Seal) keeps spills from entering drains. Rugged, reinforced PVC top layer (yellow) provides protection from extended UV exposure and vehicular traffic. Excellent for use in parking areas, loading docks and other areas where drains may be driven over. Bright yellow color helps identify protected drains. Flexible, non-absorbing bottom layer is reinforced with tear-resistant mesh.

• Size2 x 2 ft
• Gallons per Unit10 gal
• Wall Height4 in

• Containment Capacity5385 gal 20382 L
• Dimensions12 x 60 x 1 ft 3.7 x 18.3 x 0.3 m
• U.S. Patent No.5924461
• Availability309 lbs 140 kg

Entry and exit walls are supported every 12″ with a patented “living hinge.” Once a vehicle has entered or exited, the walls automatically spring back to their vertical position. Both long sidewalls are held upright by PVC sidewall assemblies. Simply swivel the feet to lower the sidewalls for storage or transport to another location. Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175. Drive-indrive-out endwalls teamed up with collapsible sidewalls offer the ultimate combination – “Hands Free” convenience and an affordable design!

• Size2 x 2 ft
• Colorsblack
• Wall Height6 in
• Gallons per Unit15 gal

Light Weight Temporary Spill Containment Unit Excellent for Containing Leaks Under Air Compressors RF Welded Seams; UV and Chemical Resistant Fabric; No Leak Paths Uses Include Haz MatD-Con; Step Off Pads; Catch Basin When Pulling Exchangers & Flanges; Memory Foam Walls Great for Low Level Piping Carrying Straps and Grommets for Ease of Transport Easily Stored on Racks at Individual Process Units You May Mix Sizes for Quantity Discounts Other Sizes Available on Request MSDS sheet available ChemicalEnvironmental Resistance Chart Available

• Availability34 lbs 15 kg
• Dimensions4 x 6 x 1 ft
• Containment Capacity179 gal 678 L

Compact Design Folds Into A Tight Package - Minimal Space Required To Store Onboard Trucks And Hazmat Response Vehicles Compact, lightweight, portable design - no inflation required. Protect heavy equipment from spills during filling, discharging, cleaning and maintenance. Smaller sizes provide total containment of drums, tanks, generators, compressors and other equipment prone to leaks and spills. Sidewalls lower quickly to allow drive indrive out. Meets SPCC and EPA Container Storage Regulation 40 CFR 264.175. Custom Sizes Available.

Light Weight Temporary Spill Containment Unit Excellent for Containing Leaks Under Air Compressors RF Welded Seams; UV and Chemical Resistant Fabric; No Leak Paths Uses Include Haz MatD-Con; Step Off Pads; Catch Basin When Pulling Exchangers & Flanges; Memory Foam Walls Great for Low Level Piping Carrying Straps and Grommets for Ease of Transport Easily Stored on Racks at Individual Process Units You May Mix Sizes for Quantity Discounts Other Sizes Available on Request MSDS sheet available ChemicalEnvironmental Resistance Chart Available