Trumeter Technologies

• Input6-240VAC or VDC
• Figures6 LCD figures, 0.50’’ [12mm] high
• Speed0-40 counts/second, (min. 12.5ms – on, 12.5ms – off)

The 94 Series (formerly the Redington Model 94) is a family of 6 figure, battery powered, electronic LCD totalizer, available with optional push-button or key reset and in base mount or panel mount configuration.

• Operating Temperature–10°C to + 55°C
• MODELET14
• Supply Voltage125VAC, 60 Hz

• Count Range999999 display rollover to 0
• Supply Voltage2.6 – 3.4VDC
• Current Consumption5uA quiescent, 10µA at 10kHz

• Operating Temperature+32°F to +122°F [0°C to +50°C]
• Display4 digit LCD 0.35″ [9mm] high
• Availability0.7 oz (20g)

Counts are input using large positive action buttons. The Add model has a single count button and the AddSubtract model has two separate count buttons. The “+” button (green) will add a count to the total and the “-” button (red) will subtract a count from the total. When activated, an audible “beeper” sounds every count to verify that a count has been registered.

• MODEL6320 Series

The Model 6320 Series is a self-powered hour meter suitable for a variety of applications. It is available in single andor multi-function units, with an array of functions and options, and with a battery life of 15+ years. Features include an external reset and programmable preset andor alert, and preset counter mode. Options include choice of hour meter type: hour meter, minutes meter or seconds meter; choice of IO: one or two inputs, switch input, low DC voltage or high voltage; as well as control input and external electronic reset options. These hour meters come in a rugged housing that is NEMA 44X, 12, & IP66 rated when used with the optional gasket – making it an ideal hour meter for industrial, hard wearing applications. In addition, the unit is compliant with CE EMC standards to EN61326:2001 for industrial applications, recognized by UL for U.S. and Canadian safety standards, and compliant to European RoHS and WEEE standards. The display utilizes a high-contrast, reflective, 8-digit LCD with 0.32 inch [8mm] digits and seven icons for easy viewing. At the back end, Switch (Dry Contact), Low Voltage DC, and High Voltage DC and AC Inputs are available. Optional external electronic reset Optional front panel programming 3 Redi-Alerts Preset functionality Start time (available on hour meter only) Part numbers must be in 63XX-X5XX-0000 format to be programmable

• Output circuitsA, B, @ 20mA each.
• Input voltage range5 to 24V (+10%).
• Current consumption80mA typical.

The series 4T260 electronic incremental encoder has a low profile 30 mm package design making it a perfect solution for many machine and motor applications. The unit has a complete 10mm through-shaft design and is an ideal choice for when space is limited. It has an integral bearing set that provide for stable and consistent operation, without concerns for axial or radial shaft runout.

• MaterialClear polycarbonate
• Storage Temp.-20°C to +60°C
• Availability62g
• MODEL7511

• Operating Temp-10°C to +60°C

The 7511HV timer is a high voltage input version of the popular 7511 LCD timer which accepts input voltages of 10-110VDC or 10-240VAC. It’s an 8 digit liquid crystal display timer, self powered with a 10 year battery life. The compact housing makes it suitable for many applications, the screw terminals ensure fast wiring and features include 4 timing modes and timing direction indication. The LCD display has backlighting (external 5VDC supply required) and 8 9mm-high digits. 9mm high contrast LCD display 10 year battery life Minimum contact closure time 1 second 4 timing modes Times up or down External reset input CE, UL and cUL approved

• MODEL720-6300
• Country of Origin85-500VAC 50/60Hz
• Availability5.0 oz (142g)