Waterford Tank and Fabrication

• temperature125° F
• operating pressure: 250 PSI

At Waterford Tank and Fabrication we meet a variety of LPG and NGL storage needs in a variety of standard and custom configurations of above-ground propane tanks. At Waterford Tank and Fabrication, we construct each of our propane tanks to the highest industry standards to meet virtually any customer specification. At Waterford, our propane storage tanks are available in standard sizes that range from 18, 000 to 30, 000 gallons, with custom built options available upon request. Waterford’s propane tanks are manufactured by using carbon steel, and are available in lengths from 40 ft. to 66 ft., widths from 9 ft. to 11.5 ft., and weights from 30, 000 lbs. to 60, 000 lbs. Waterford’s propane tanks can handle operating pressures up to 250 PSI and temperatures up to 125°F. Waterford’s capabilities can include a variety of different configurations for your customized project.

• DiameterMin: 18 In Max: 15.6 Ft.
• LengthMin: 18 In Max: 60 Ft.

• Pressure16, 1/2
• Capacity100 bbl – 9'6" x 8'

Waterford Tank builds disposal well tanks to fit your needs in oilfield production, waste fluids, sump fluids, oil or gas treating plant fluids, and any non-hazardous fluids from energy and any non-oilfield related industries. Our disposal well tanks are a great fit for any industry.

• Capacity100 bbl – 9'6" x 8'
• Pressure, Vacuum(oz)16, 1/2

• capacities1,000 gallons to 27,000 gallons

Waterford Tank and Fabrication provides custom built steel water storage tanks with capacities from 1, 000 gallons to 27, 000 gallons. All welded tanks purchased from Waterford Tank can include fittings and piping with sizes up to 6” inch NPT, thief hatches and clean out doors as well as tapered bottoms. We offer internal and external coatings to extend the use and life of the tanks, in addition to a variety of paints and colors to your specifications. We serve the needs of our customer from the time of inquiry to the final delivery and installation.

• measures24” OD x 64” seam to seam x 88”

SEPARATORSWaterford Tank and Fabrication vertical separators are pressure vessels designed for separating well streams into gaseous and liquid components. The well stream enters the separator and encounters a deflector plate beginning the first phase of separation. The liquid component of the well stream settles to the bottom of the pressure vessel. The liquid level is controlled by means of a dump valve that sends the liquids to an atmospheric tank or a gun-barrel for additional gravity separation. The gaseous component passes through a mist extractor in the top of the pressure vessel removing the remaining small liquid particles before existing the top of the pressure vessel and then to metering for sales.

Knockout Drums are used to efficiently remove liquid droplets or mist from relief gas streams. The knockout drum slows down gases and allow liquids to fallout of the gas stream. Both horizontal and vertical design are common configuration for knockout drums. These vessels can commonly be referred to as flare knockout drums, flare drums, flash drums, knockout pots and compressor suction drums. Waterford Tank and Fabrication’s knockout drums can be installed upstream of natural gas compressors, engines and generators, upstream of natural gas filters, vapor recovery systems and upstream of flare stacks. Advantages of knockout drums are the removal of liquid droplets, reduces flare smoke and prevents the raining of flaming liquids and recovers liquids from gases that go to dew point at ambient pressures and temperatures.

• Pressure, Vacuum(oz)16, 1/2
• Capacity –100 bbl – 9'6" x 8'

Our vertical frac tanks and horizontal frac tanks successfully store water used in the downhole fracturing process to extract oil or gas from shale or other permeable formations. Our skidded or saddled frac tanks are manufactured in 210, 300 and 400 BBL sizes for your convenience.

• Size400BBL (12′-0″ X 20′-0″)

Waterford’s Gunbarrel tanks are an economical and low maintenance method to treat oil when properly applied. These tanks are an excellent choice when adequate separation of oil, water, and gas is required and uses atmospheric pressure, gravitational force and retention time. Production enters the inlet flume section at the top of the tank. Solution gas is vented from the top of the flume or equalized to storage. Waterford Tank’s Gunbarrel tanks come with flume pipe assembly, spreader table, waterleg outlet with tie down brackets, API 5L threaded couplings (4” standard) and bolt-on gas chamber (flume pipe cap). We can provide our standard design Gunbarrel tank or we can customize our standard design to match your exact requirements.

• Sizes100 bbl – 9'6" x 8'

A Skid Tank is an excellent choice where portability is a must have. Waterford’s Above Ground Skid Tanks can be easily moved when empty by sliding them on the integral runners The skids stabilize the tank and maintain a fixed elevation when being moved. Skids also provide clearance for visual inspection of the tank underside. Waterford Tank and Fabrication can build different types of Skid Tanks; Small tank skids for tanks up to 1, 500 gallons with runners fabricated from steel angle, and large tank skids with runners made from steel pipe. All tanks are built to ASTM specifications and are assured to have the highest level of quality.