Wenesco Inc.

• Model NumberMPM 420
• Capacity400 LBS
• SIZE-OD-IN22 DIA X 34 H
• SIZE-ID-IN13.5 DIA X 11 H

All Wenesco melting pots include safety features and comply with all national codes for commercial and industrial gas heating equipment. Options include: Digital thermostat, Electric Ignition, Heated Drain, Transfer Pump, Stirrer, and more. Please call or write to discuss your special needs.

• Model NumberC79-1
• Foam nozzle-inches1 X 2

Wenesco's Foam Fluxers are widely used to apply flux to circuit boards prior to wave soldering. They're renowned for generating a smooth, even foam head across the length of the foam nozzle.

• Solder Capacity16 lb
• ModelMPM 16
• Inside size in inches5.75 X 5.25 X 2

Soldering circuit boards in a shallow pot dates back to the 1950, s and is still a reliable method of low volume soldering of PCB?s. First spray or brush soldering flux on the bottom of the board. Next skim the surface of the pot to clear surface dross (oxidation). Finally, using a "board gripper, " dip the board flat into the molten solder. The board will solder in less then 5 seconds.

• Power1000W-120 or 240V
• Max Wave in inches4 x 1
• Solder Capacity in pounds35

One of Wenesco's most important product lines is Standard and Custom-made Wave Solder Pots for many commercial and industrial applications. We offer several options for varied applications, such as special nozzles, level switches, solder feeders, and nitrogen inerting. Our wave solder pots will work with standard and lead-free solder.

• Model NumberMW10
• Power120 V, 1580W
• Inside inches16 dia x 12 h
• Lbs, wax70
• Quarts40

There is no hot water to spill or evaporate with convection heating. Ours cool quickly when turned off and the pot is empty. The water in the jacket retains heat for a very long time. 2. Unlike uninsulated water jacket melters, convection melters are fully insulated. The exterior remains cool during use which helps prevent accidental burns and conserve energy. 3. Convection provides even heat. Heat up time is usually 1-12 to 2 hours. There are no hot spots like a direct heat melter. This means less danger of burning your product if you have no stirrer in the melting pot. 4. Our accurate digital temperature control ensures that you will not overheat sensitive products. The air temperature in the jacket will never exceed your setting..

• Max temperature2300F (1259C)
• Inside dimensions13" dia x 12.5"
• Outside dimensions:24" dia x 24"

The furnace walls are constructed mainly with insulated firebrick, 2 inches thick, and is surrounded with a stainless steel shell. The base has 3-inch firebrick mounted on a robust galvanized steel stand. The rated maximum load is 150 lbs. The furnace includes a lock-in lid support, two wide view peep holes, ventilated louvered switch box, and two hand lifts.

• ModelHTP1
• height40 in
• Base dimensionsHTP1 40 in 12 in
• immersion12 in