We are offering ptfe sheets, rods, bushes. ptfe moulded rod /round bar : dia 25mm - 500mm , dia length upto 500mm ptfe moulded bush sleeve & hollow bar : custom made outer & inner dia, length 100, 300, 500mm ptfe moulded sheet : 'thickness 2.5mm to 100mm, length & width - 300mm2 to 1200mm2.

We are offering Graphite Rings, Packings, Gaskets.1. Pure Flexible Graphite rings (non metallic ) Flexible Graphite Rings (metallic) Flexible Graphite cut rings (single and double cut ). Flexible Graphite Self Sealing Rings. Sizes : ID upto 6 mm to 500 mm. Thickness : 1 mm to 100 mm 2. Pure Flexible Graphite Braided Packing (Rope) and RingAs per Customer Requirement.

We are offering ring type joint. type : r type-oval & octagonal shape and rx & bxmaterial : soft iron/ss304/316/316l/347/327/410/monel etc. standard : asme b16.20

We bring forth highly demanded PTFE Rod. Our PTFE Rod is often chosen to produce bearings because of its very low friction and also for its free running ability. Because of its ability to conform to shape otherwise known as flow, PTFE Rod is used for seals in valves, this is because it can conform to shape and create a high specification valve seal. PTFE Rod can easily be machined but due to the surface softness, care must be taken in lathe jaws or high compressive loads, which may cause distortion. Another important element to remember regarding PTFE Rod is the coefficient of expansion due to heat changes; this can be uneven with PTFE and may cause distortion in components. PTFE Rod is manufactured in two distinct ways, extruded PTFE Rod is the most popular and is relevant to smaller sizes, Moulded PTFE Rod is relevant to the diameters over 100mm in size, smaller sizes are also available in extruded form. Sizes

• Diameters : Ranging from 3mm up to a maximum of 300mm
• Length : Range from 100mm to 1000mm

PTFE Bushes can be used in glass equipments because of its wear life when compared to other thermoplastics is very low. PTFE bushes have cryogenic stability with non-wetting property. A bush made of PTFE provides easy application and low maintenance. PTFE gaskets, rings etc are machined from bushes. PTFE T Bushes are also available. Sizes

• Bushes are available in standard length of 100mm.
• Larger sizes are made on request only.
• Generally the OD is from 19mm to 250mm and ID is from 12.5mm to 200mm

We are engaged in offering wide assortment of Pure Flexible Graphite Sheets to the clients. These Graphite Sheets are manufactured with pure graphite ensuring the long service life. Our Graphite Sheets are widely used in kinetic and static sealing for machine, pipe pump and valve in power, oil, chemical and light industries. Our Graphite Sheets are available to the clients in 1000 mm x 1000 mm of size. These Graphite Sheets have the thickness of 1 mm to 3 mm and the density of 1.0 gms / cm3. Features :

• High temperature resistance
• Corrosion resistance
• Excellent self-lubricity

We are offering ptfe sheets, rods, bushes. ptfe moulded rod /round bar : dia 25mm - 500mm , dia length upto 500mm ptfe moulded bush sleeve & hollow bar : custom made outer & inner dia, length 100, 300, 500mm ptfe moulded sheet : 'thickness 2.5mm to 100mm, length & width - 300mm2 to 1200mm2.

We are offering Graphite Rings, Packings, Gaskets.1. Pure Flexible Graphite rings (non metallic ) Flexible Graphite Rings (metallic) Flexible Graphite cut rings (single and double cut ). Flexible Graphite Self Sealing Rings. Sizes : ID upto 6 mm to 500 mm. Thickness : 1 mm to 100 mm 2. Pure Flexible Graphite Braided Packing (Rope) and RingAs per Customer Requirement.

We are offering ring type joint. type : r type-oval & octagonal shape and rx & bxmaterial : soft iron/ss304/316/316l/347/327/410/monel etc. standard : asme b16.20

We bring forth highly demanded PTFE Rod. Our PTFE Rod is often chosen to produce bearings because of its very low friction and also for its free running ability. Because of its ability to conform to shape otherwise known as flow, PTFE Rod is used for seals in valves, this is because it can conform to shape and create a high specification valve seal. PTFE Rod can easily be machined but due to the surface softness, care must be taken in lathe jaws or high compressive loads, which may cause distortion. Another important element to remember regarding PTFE Rod is the coefficient of expansion due to heat changes; this can be uneven with PTFE and may cause distortion in components. PTFE Rod is manufactured in two distinct ways, extruded PTFE Rod is the most popular and is relevant to smaller sizes, Moulded PTFE Rod is relevant to the diameters over 100mm in size, smaller sizes are also available in extruded form. Sizes

• Diameters : Ranging from 3mm up to a maximum of 300mm
• Length : Range from 100mm to 1000mm

PTFE Bushes can be used in glass equipments because of its wear life when compared to other thermoplastics is very low. PTFE bushes have cryogenic stability with non-wetting property. A bush made of PTFE provides easy application and low maintenance. PTFE gaskets, rings etc are machined from bushes. PTFE T Bushes are also available. Sizes

• Bushes are available in standard length of 100mm.
• Larger sizes are made on request only.
• Generally the OD is from 19mm to 250mm and ID is from 12.5mm to 200mm

We are engaged in offering wide assortment of Pure Flexible Graphite Sheets to the clients. These Graphite Sheets are manufactured with pure graphite ensuring the long service life. Our Graphite Sheets are widely used in kinetic and static sealing for machine, pipe pump and valve in power, oil, chemical and light industries. Our Graphite Sheets are available to the clients in 1000 mm x 1000 mm of size. These Graphite Sheets have the thickness of 1 mm to 3 mm and the density of 1.0 gms / cm3. Features :

• High temperature resistance
• Corrosion resistance
• Excellent self-lubricity