Other Products / Services #4116451

Wani Labs manufactures Laboratory Hot Plates in standard working sizes. The finest grade steel ensures excellent rust resistance to the product. The outer body, fabricated from mild steel, is coupled with a fine powder coat finish. The hot plates can hold the surface temperature up to 300 ºC. All Hot Plates are fitted with an electrically operated energy regulator and standardized 3-Heat Switch Control, with corresponding indicators.

Feature: Table-top Two Tier Model -Metal casting Plate -Outer body made of mild steel with powder coat finish -Electrically operated Energy Regulator & 3-Heat Switch Control with corresponding indicators -Nichrome / Kanthal made long lasting heating elements Cera wool insulation Surface Temp. Up to 300 ºC -Surface Temperature up to 300 ºC Working Sizes 8"Dia 9" Dia 12" Dia Available in SS top and MS top

Our Electric Muffle Furnace sports a robust structure with its double walled construction; its inner is made of ceramic muffle for complete safety. The outer side of our Muffle Furnace is carved from thick gauge and coated with M.S. powder. Its outstanding performance and excellent reliability has made us one of the well known Muffle Furnace suppliers both in the domestic and international markets Features -High grade insulation -Front opening door -Long lasting heating elements -Side Mounted Control Panel for easy access -Solid State Digital Temperature Controller -Cr / AlK Type Sensors -Solid State Safety Fuse -Available in two different temperature ranges (960 ºC & 1160 ºC) Working Sizes 4" x 4" x 9" 5" x 5" x 10" 6" x 6" x 12" 9" x 9" x 18

Wani Labs is a prominent Manufacturer, Exporter and Supplier of Industrial Furnaces. Our Industrial Furnace is preferred for its sturdy double walled construction. The inner and outer body is made of Stainless Steel (SS). It is equipped with free polyurethane puff insulation, and an advanced Solid State Digital Temperature Controller. The top opening door of the furnace is fitted with full flap magnetic gasket. The inner full length glass door of our furnace facilitates viewing of samples without disturbing the inside temperature.

We offer a wide variety of Flexible Fabric Heating Mantle which are extensively used in laboratories to apply heat to containers. Our Laboratory Heating Mantleis available with a sturdy aluminum body. Its epoxy powder finish enhances its exterior. The Heating Mantle we offer are best suited for round bottom flasks. Proper electric wiring eliminates the risk of short circuits. The high temperature range of 400º C makes our Heating Mantle ideal for industrial use.

Feature: Aluminum body with epoxy powder coat finish -Fiber glass net with long lasting nichrome heating element -High grade glass wool insulation -Suitable for round bottom flask -Energy regulator with corresponding lamp indicator to control temperature -Temperature

Range: Up to 400º C Working Sizes 50 100 250 500 1 2 3 5 10 20 50 100 200 Aluminum body with epoxy powder coat finish Fiber glass net with long lasting nichrome heating element High grade glass wool insulation Suitable for round bottom flask Energy regulator with corresponding lamp indicator to control temperature Temperature

Range: Up to 400º C Features Working Sizes 50 ml 100 ml 250 ml 500 ml 1 liter 2 liter 3 liter 5 liter 10 liter 20 liter 50 liter 100 liter 200 liter

The double walled construction of our Round Vacuum Oven has given a boost to its demand in the global market. The inner sides of this oven are made from thick gauge stainless steel with Argon welding. Heavy gauge mild steel is used for its outer surface, and is duly finished with powder coating. Nichrome made heating element, embedded with ceramic beads, makes it highly durable and ensures outstanding performance. Our round vacuum ovens are available with perforated stainless steel trays.

Feature: High grade glass wool insulation -Silicon Gasket for tightening and to minimize the heat loss -Full length toughened glass door with wing nuts -Double hand shut off valve for vacuuming & purging -Dial type vacuum gauge for viewing of vacuum pressure -Solid State Digital Temperature Controller & P.T  100 Sensors -Optional Safety Controller facility -Temperature Range: Up to 200 ºC Working Sizes 9" Dia X 12" Depth 12" Dia X 15" Depth 15" Dia X 18" Depth

Our double walled Temperature Humidity Oven is fabricated using high grade steel. The oven has an inside structure made of SS with a mirror polish. The MS and powder coat exterior finish makes our Humidity Oven a favored choice among our valued customers. This Vertical Model has a front opening door with a magnetic full flap gasket top to minimize heat loss. We also provide an illuminated chamber with SS tubular heating element, and a top mounted control panel for easy access. We are a prime Humidity Control Oven Manufacturer in India. Features -Inner full length glass door for viewing of specimens without disturbing inside temperature -Rear mounts motor with blower for air circulation & uniformity

Features:

• Temperature Control: Solid State Digital Temperature
• Temperature Range: + 5 ºC above ambient to 60 ºC
• Resolution: 0.1 ºC -Solid State Digital RH Controller with HS  220 direct RH indication Sensor
• Humidity Range: 45 % to 90 %

RH Resolution: 1 % -S.S. made argon welded steam generator with kettle type heating element -Low Water Level Circuit with Buzzer acknowledgment -Individual Safety thermostat & glass fuse for heating & boiler -S.S. Rods made shelves with adjustable Working Sizes 18" L x 18" W x 18" H 3 CFT / 90 LTRS 20" L x 20" W x 28" H 6 CFT / 175 LTRS 20" L x 22" W x 34" H 8 CFT / 225 LTRS 24" L x 2" W x 36" H 10 CFT / 280 LTRS 24" L x 24" W x 38" H 12 CFT / 320 LTRS

We are an eminent manufacturer and exporter of Rectangular Vacuum Ovens in India. The double walled construction and thick gauge stainless steel plate with Argon welding on the inner side, has added a cutting edge to the construction of the oven. The outer body is heavy gauge mild steel with powder coat finish. High grade glass wool insulation, along with nichrome made heating element embedded with ceramic beads, are the added advantages of our excellent quality oven

Feature: Silicon Gasket for tightening and to minimize the heat loss -Full length toughened glass door with wing nuts -Double hand shut off valve for vacuuming & purging -Dial type vacuum gauge for viewing of vacuum pressure -Solid State Digital Temp. Controller & P.T  100 Sensors -Optional Safety Controller facility -Perforated stainless steel trays -Temperature

Range: Up to 200 ºC Working Sizes 12" L x 12" W x 16" Depth 14" L x 14" W x 20" Depth 18" L x 18" W x 24" Depth 20" L x 20" W x 30" Depth

Wani Labs UV Cabinet is scientifically developed and designed to provide the most accurate results. The double walled construction and a Solid State Digital Temperature Controller make our U.V. Cabinet a unique product. The unit comes with a SS Argon-welded inner and an MS powder coated outer, which ensure reliable and quality performance of the same. We rank among the leading Ultraviolet Test Cabinet manufacturers and exporters in India Specifications.

Details:

• Model: Table Top
• Construction: Single walled made up of mild steel with epoxy powder coat finish
• Tubes: In-built Long Wave & Short Wave with corresponding Toggle Switch (245nm & 365nm)
• Illumination: In-built Fluorescent
• Tube Window: Front mounted window with magnifying glass for viewing of specimens
• Door: Front opening door with magnetic latch catch

Wani Labs manufactures superior quality Laminar Air Flow. Our product is a Vertical model with a specially designed triple walled construction. We also provide Horizontal Laminar Air Flow, which has a front opening door and a top / bottom mounted control panel for ease of operation. The superlative grade wool insulation fitted in our Laminar Air Flows makes them a distinguished and sought-after products.

Available Sizes: 2 ft x 2 ft x 2 ft 2 ft x 4 ft x 4ft Custom sizes also available

We offer the table-top model of Barnstead Type Water Still. The unit is made from stainless steel along with complete Argon welding. A high quality kettle type immersion heater is provided with our highly efficient Manesty Type Water Still. Also included is a water level and drain facility for efficient working. Increasing demand in global markets has made us stand amidst the well known Barnstead Type Water Still exporters from India. Features -Heavy gauge top mounted S.S. flange -Accurate and pyrogen free distilled water -High quality kettle type immersion heaters -Opening type condenser for periodic cleaning by opening flange -Water level and drain facility

Our Mortuary Cabinets are double walled and their inner chamber is made of fine grade ceramic. The outer body is made of heavy duty mild steel, thick gauge plates that are further powder coated. The insulation of high grade ceramic wool helps to minimize heat loss. We offer these cabinets at very competitive prices. Wani Labs is a leading Manufacturer and exporter of Mortuary Cabinets.

We provide quality Bunsen Burners manufactured using high grade raw materials. Our Electric Bunsen Burner is fitted with an SS body, with mirror polish and superior finish. Our burner provides accurate results across all applications. It comes fitted with a control panel made of MS, with a powder coat finish. We are ranked among the leading Automatic Bunsen Burner manufacturers in India.

Features: Useful for single crucible heating for ashing -Standard size of 6 Ht. X Cowl 2.1/2 base dia 4.1/2 -Stainless Steel body with mirror polish -Control Panel made of mild steel with powder coat finish -Energy regulator is provided to control heating by ON / OFF action with corresponding indicator -Works at 1 Phase, 230 Volts, 50 Hz -Extremely durable

The two-tier construction of our Platform Shaker has increased its demand in specific industries and scientific laboratories. The upper compartment of the Orbital Platform Shaker is of heating mantle type, along with glass fiber net with heating element. This type of Open-Air Platform Shaker is suitable for round bottom flasks as it simplifies their functioning. Wani Labs ranks among the major Digital Platform Shaker manufacturers in India

Features:

• A two tier in construction
• Upper compartment is heating mantle type with fiber glass net with heating element
• Suitable for round bottom flask
• Lower compartment consist motor with magnet to stir the liquid in flask with help of Teflon Paddle
• Electrically operated energy regulator to control the temperature
• Speed regulator to control the speed of the motor
• Temperature Range Up to 300 ºC

We manufacture Digital Colony Counter from mild steel, which is duly power coated for long life. Its soft touch membrane switches and digital LED display count simplifies the working of the equipment. The various other features of Electronic Digital Colony Counter offered by us, have increased its demand in scientific laboratories and pharmaceutical / allied industries. Wani Labs has marked its presence in the global market as one of the top ranking Automatic Digital Colony Counter manufacturers and exporters from India Features A mild steel duly powder coated body Digital LED display Count Soft touch membrane switches Buzzer acknowledgement with electrically operated PEN with probe & digital display count for marking colonies A bright neon tube light for clear vision Magnifying glass with stand

The Low Temperature Bath Circulator has a double walled construction - the inner sides are made of stainless steel and outer body is made of mild steel with epoxy powder coat finish. It is insulated by CFC-free polyurethane PUFF insulation. The Low Temperature Circulatory Bath is controlled by a solid state digital temperature controller or a PID based microprocessor digital temperature controller with RTD  P.T  100 Sensors. It is available in Temperature Range from 0 ºC to 70 ºC according to the requirement of the customer. The equipment is useful in Quality Control labs, Research & Development labs, and also in production departments. Wani Labs is one of the prominent Low-Temperature Refrigerating Circulator Suppliers in India Difference between the bath used in laboratory and in production area The bath used in laboratory is only useful for testing of samples inside the bath or if circulation requires it to consume a very mild heat load. On the contrary, the bath used in production area (also called CHILLER) consumes high heat load and has a higher capacity to cool the liquid rapidly in the desired time.

Our Vertical Autoclaves are manufactured as per industrial norms. Known for their superior performance, our Autoclaves have a sizeable demand across the global market. We provide the Vertical Autoclave in varied technical specifications to meet the diverse and exacting needs of our customers industries Features --Double walled in construction -Inner made of thick gauges stainless steel with argon welding -Outer made of thick gauge stainless steel with 3 Nos. metal casting legs -Foot lifting facility for opening of lid -Silicon Gasket to minimize the heat loss -Stainless Steel made wing nuts for tightening of lid -Selection of Regular, Semi Automatic & Fully Automatic -Solid State Digital Temperature Controller with timer -RTD P.T  100 SENSORS -Stainless Steel made perforated basket -Dial type pressure gauge for viewing of pressure with calibration certificate -Extra port for validation Working Sizes 12" Dia x 20" Depth 18" Dia x 24" Depth 18" Dia x 30" Depth 22" Dia x 30" Depth

The Photostability Chamber manufactured by Wani Labs sports a specially designed stainless steel interior as well as exterior for a clean working / testing environment. The PID action, with SSR output programmable temperature controller, makes it highly efficient. We provide high grade white wool insulation for minimizing the heat exchange rate. The specially designed safety cooling system, along with automatic changeover, is capable of meeting the demands of interrupted long term testing. Humidification arrangement can also be added on request. If the temperature exceeds above 3 degrees of SET temperature then the lights of this chamber switch off automatically. We are regarded among the supreme Photostability Chamber suppliers in India.

Features:

• Programmable temperature and fluorescent and UV light exposure control
• Exhaust fan for removing heat air generated by the tube light
• Safety interlocks door switch for preventing accidental UV exposure
• Continuous graphical presentation of data on panel
• Comes with S.S. 316 perforated removable shelves
• Non-volatile memory for SET values, for data protection in case of power failure
• Specially designed 316 S.S. Interior & 304 S.S. Exterior for superior clean environment
• PID action with SSR output programmable temperature controller
• High grade white wool insulation provided to minimize the heat exchange
• Cooling kit includes hermetically sealed compressor, fan cooled condenser, time delay, etc. and is safely placed below the chamber
• Continuous graphical presentation of data on panel
• 4 Point gradient indication provide continuous uniformity reference Temperature

Range: 10 ºC to 40 ºC

Temperature Accuracy: ±0.5 ºC -Optional humidification arrangement on request Compliance of all documents and procedure of IQ / OQ /PQ /DQ with SOP and certification