Pune, Maharashtra, India
Our Products
Suitable For: Honing Oil, Lapping Oil, Grinding Oil, Testing Rig Oil, Anti Rust Oil, Dewatering Oil and Others.
Main Feature: Grease, Solvent removal from fresh oil, moisture seperation from oil.
Application: Automobile, Auto ancillaries, power, mechanical and for all industries using oil.
Recommended for Systems with Proportional Hydraulics
KEY FEATURES
Approved By BHEL, NTPC, TATA POWER, INDIAN OIL CORPORATION, MAHAGENCO and Others
"Fluent" reduces the downtime & maintenance cost by more than 80% User Defined Configurations Available: Ask for More Information.Note 1: Expected life of filter for dedicated use for maintaining oil quality is more than one year.
Fluent Series
| Model | Tank Capacity | Dirt Holding Capacity (gm) |
| Ultra -10 | 600 | 600 |
| Ultra -25 | 900 | 600 |
| Ultra -50 | 1800 | 1000 |
| Ultra -75 | 3000 | 2000 |
| Ultra -100 | 6000 | 3800 |
| Ultra -200 | 12000 | 7200 |
| Ultra -400 | 24000 | 14000 |
Comparative Media Performance
| Media Properties | Glass Fiber Cartridge | Electrostatic | Paper Wound | Centrifuge | Fluent Ultra |
| Cleanliness | Excellent < NAS 4 | NAS 7 | NAS 8 | NAS 10 | Fluent with “Lucida” media |
| Water Removal | Does Not Remove | Can’t work with Moisture | Possible by consuming media | Free moisture separation possible | Excellent < NAS 4 |
| Viscosity Range | 0 – 400 cst | 0-200 cst | 0-100 cst | 0-100 cst | Maintains dissolve moisture < ppm |
| Mineral Oil | Yes | Yes | Yes | Yes | Yes for all Fluids with same Element |
| Glycol-Water, Phosphate ester | Possible with Same element | Does not work | Can’t use same element | Possible | Yes for all Fluids with same Element |
| Dirt Holding Capacity | Very Low | Moderate | Moderate | NA | Very High |
| Operating Cost | Very High | Moderate | Moderate | High | Very Low |
| Capital Cost | Low | Moderate | Moderate | High | Moderate |
| Overall Performance | Good | Average | Average | Average | Excellent |
Vats "bonflow" is a rigid, graded-density filter cartridge constructed primarily of cellulose fibers, and a tough, chemically resistant thermosetting melamine resin. The proprietary manufacturing process results in more fibers towards the center core region, creating a graded-density structure. The thermosetting resin "bonds" the fibers by cross-linking the resin and cellulose resulting into a permanent rigid matrix. Vats "bonflow" cartridges are grooved to significantly increase the surface area and extend the service life. Vats "bonflow" is manufactured and tested to deliver quality, consistency, and absolute cost effective filtration performance. Vats in-process quality assurance provides the control that results in consistent cartridges with defined ratings time-after-time.
| Features | Advantages | Benefits |
| Graded Density | High Dirt Holding Capacity Resulting in Long Life |
Lower Cost of Operation & Higher ROI |
| Hardened Rigid Filter - Not Elastic | Eliminates Particle Unloading | Consistent Performance for The Entire Life Of the Element |
| Wide Chemical Compatibility | Universal Element for Variety of Applications | Inventory Reduction & Higher ROI |
| Working Temperature upto 110°C Continuous (Steam Steralisable @ 3kg/cm², 120°C) For Cellulose Melamine and Acrylic Phenolic its uorto 150°C | Makes It Suitable for Wide Range of Applications | Reduced Inventory & Costs |
|
Available with End Caps (SOE) Code 7, Code 0 and Others |
Same MOC can be used in Standard and Critical Applications | End Caps Ensures 100% Sealing |
| Proven Eco Friendly Material | Easy for Disposal |
Practically ZERO Disposal Costs (Can Be Incinerated) *applicable for Cellulose Melamine |
| Absolute Elements are Available | Higher Efficiency | High Quality at Low Cost |
Recommended for Systems with Servo Hydraulics
KEY FEATURES
For Mineral, Synthetic, Water Glycol, FRF Fluids, Water Hydraulics Etc. "Fluent" reduces the downtime & maintenance cost by more than 80% User Defined Configurations Available: Ask for More Information.Note 1: Expected life of filter for maintaining oil cleanliness is approximately one year.Note 2: Moisture
Fluent Series
| Model | Tank Capacity | Dirt Holding Capacity(gm) |
| Pro -3 | 750 | 600 |
| Pro -6 | 1500 | 1600 |
| Pro -10 | 2500 | 2800 |
| Pro -20 | 5000 | 4200 |
| Pro -40 | 10000 | 8000 |
| Pro -80 | 20000 | 16000 |
| Pro -160 | 40000 | 32000 |
Comparative Media Performance
| Media Properties | Glass Fiber Cartridge | Electrostatic | Paper Wound | Centrifuge | Fluent Pro |
| Cleanliness | Excellent < NAS 4 | NAS 7 | NAS 8 | NAS 10 | Fluent with “Lucida” media |
| Water Removal | Does Not Remove | Can’t work with Moisture | Possible by consuming media | Free moisture separation possible | Excellent < NAS 4 |
| Viscosity Range | 0 – 400 cst | 0-200 cst | 0-100 cst | 0-100 cst | Maintains dissolve moisture < ppm |
| Mineral Oil | Yes | Yes | Yes | Yes | Yes for all Fluids with same Element |
| Glycol-Water, Phosphate ester | Possible with Same element | Does not work | Can’t use same element | Possible | Yes for all Fluids with same Element |
| Dirt Holding Capacity | Very Low | Moderate | Moderate | NA | Very High |
| Operating Cost | Very High | Moderate | Moderate | High | Very Low |
| Capital Cost | Low | Moderate | Moderate | High | Moderate |
| Overall Performance | Good | Average | Average | Average | Excellent |
Recommended for Systems with Proportional Hydraulics
KEY FEATURES
Suitable For:Honing Oil, Lapping Oil, Grinding Oil, Neat Cutting Oil and Others.** Moisture Removal/ Control available as an additional option
Note: Expected life of filter for maintaining oil cleanliness is approximately one year "Fluent" reduces the downtime & maintenance cost by more than 80%
Fluent Series
| Model | Tank Capacity | Dirt Holding Capacity(gm) |
| Plus 11 | 250 | 360 |
| Plus 22 | 500 | 720 |
| Pro Plus 11 | 250 | 360 |
| Pro Plus 22 | 500 | 720 |
| Plus 10 | 500 | 200 |
| Plus 25 | 1000 | 400 |
| Plus 50 | 2000 | 800 |
| Plus 75 | 3000 | 1600 |
| Plus 100 | 7500 | 3000 |
Comparative Media Performance
| Media Properties | Glass Fiber Cartridge | Electrostatic | Paper Wound | Centrifuge | Fluent Plus |
| Cleanliness | Excellent < NAS 4 | NAS 7 | NAS 8 | NAS 10 | Fluent with “Lucida” media |
| Water Removal | Does Not Remove | Can’t work with Moisture | Possible by consuming media | Free moisture separation possible | Excellent < NAS 4 |
| Viscosity Range | 0 – 400 cst | 0-200 cst | 0-100 cst | 0-100 cst | Maintains dissolve moisture < ppm |
| Mineral Oil | Yes | Yes | Yes | Yes | Yes for all Fluids with same Element |
| Glycol-Water, Phosphate ester | Possible with Same element | Does not work | Can’t use same element | Possible | Yes for all Fluids with same Element |
| Dirt Holding Capacity | Very Low | Moderate | Moderate | NA | Very High |
| Operating Cost | Very High | Moderate | Moderate | High | Very Low |
| Capital Cost | Low | Moderate | Moderate | High | Moderate |
| Overall Performance | Good | Average | Average | Average | Excellent |
Zero Downtime for Governing and Lubricating Systems
KEY FEATURES
Approved By BHEL, NTPC, TATA POWER, INDIAN OIL CORPORATION, MAHAGENCO and Others
Industries: Thermal (Gas and Coal), Hydro, Wind, Nuclear and Others. "Fluent" reduces the downtime & maintenance cost by more than 80% User Defined Configurations Available: Ask for More Information.Note 1: Expected life of filter for maintaining oil cleanliness is approximately one year.Note 2: Moisture < 50ppm option available.
Fluent Series
| Model | Tank Capacity | Dirt Holding Capacity(gm) |
| Power 200 | 7500 | 5000 |
| Power 400 | 15000 | 10000 |
| Power 800 | 30000 | 20000 |
| Power 1200 | 45000 | 30000 |
| Power 1600 | 60000 | 40000 |
Comparative Media Performance
| Media Properties | Glass Fiber Cartridge | Electrostatic | Paper Wound | Centrifuge | Fluent Power |
| Cleanliness | Excellent < NAS 4 | NAS 7 | NAS 8 | NAS 10 | Fluent with “Lucida” media |
| Water Removal | Does Not Remove | Can’t work with Moisture | Possible by consuming media | Free moisture separation possible | Excellent < NAS 4 |
| Viscosity Range | 0 – 400 cst | 0-200 cst | 0-100 cst | 0-100 cst | Maintains dissolve moisture < ppm |
| Mineral Oil | Yes | Yes | Yes | Yes | Yes for all Fluids with same Element |
| Glycol-Water, Phosphate ester | Possible with Same element | Does not work | Can’t use same element | Possible | Yes for all Fluids with same Element |
| Dirt Holding Capacity | Very Low | Moderate | Moderate | NA | Very High |
| Operating Cost | Very High | Moderate | Moderate | High | Very Low |
| Capital Cost | Low | Moderate | Moderate | High | Moderate |
| Overall Performance | Good | Average | Average | Average | Excellent |
