Kolkata, West Bengal, India
Our Products
HT VCB & RELAY PANEL11 KV INDOOR TYE VCB WITH RELAY PANEL33 KV INDOOR TYE VCB WITH RELAY PANEL33 KV OUTDOOR TYPE VCB PANEL
High-mast lighting is a tall pole with lighting attached to the top pointing towards the ground, usually but not always used to light a highway or recreational field. The pole that the lighting is mounted on is generally at least 30 metres (98 ft) tall (under this height it is referred to as conventional lighting system), while the lighting consists of a luminaire ring surrounding the pole with one or several independent lighting fixtures mounted around it. Some units have the lighting surrounded by a circular shield to prevent or reduce light pollution or light trespass from affecting neighbourhoods adjacent to the highway.
Maintenance of these systems are done by lowering the luminaire ring from the mast head to the base using a winch and motor to the ground or at a height accessible by a cherry picker and located in areas to allow for easier access without distrupting traffic.
The PSI-12 range of 12kV AIS Panels with Pascal Make Vacuum Circuit Breakers are suitable for secondary distribution networks up to 12kV, Short Circuit Breaking Current up to 26.3kA and rated currents up to 1600A for both indoor and outdoor Execution.
The panels are designed for)
1)M2, E2, C2 category with Virtually Maintenance-Free Operation 2) To deliver a long service life with highest level of reliability 3) Suitable for both Standard Duty Cycle 0-0.3s-00-3m-CO and Auto reclosing Duty Cycle 0-0.3s-00-15s-00-3m-CO 4)Built- In Safety Features & Interlocks with Special Door Interlocks 5) Internal arc features on all HV Compartment 6) Compared to the best in the industry at a low cost
Meeting Every Switching Need
It is suited for all industrial applications specifically for public distribution. The PSI range of switchgear is very flexible and available in multiple configuration.
1)Standard Indoor AIS Cubicle with ICOG configuration and Switch Board configuration.2) PSI truck housed in Kiosk with bushing or cable entry/exit for Outdoor application. 3) PSI truck in skid mounted configuration for mining applications 4) PSI Switch Board housed in an Outdoor Shell.
Having a swimming pool outside in your back yard is a luxury many of us enjoy, but it can come at a high cost even during winter months. Once you have the solar pump installed, there will be no electricity costs to run the pool, so you will not only save money you can spend elsewhere but also around 6 tons of emissions each year.
Solar water heating (SWH) is the conversion of sunlight into renewable energy for water heating using a solar thermal collector. Solar water heating systems comprise various technologies that are used worldwide increasingly.
In a "close-coupled" SWH system the storage tank is horizontally mounted immediately above the solar collectors on the roof. No pumping is required as the hot water naturally rises into the tank through thermosiphon flow. In a "pump-circulated" system the storage tank is ground- or floor-mounted and is below the level of the collectors; a circulating pump moves water or heat transfer fluid between the tank and the collectors.
SWH systems are designed to deliver hot water for most of the year. However, in winter there sometimes may not be sufficient solar heat gain to deliver sufficient hot water. In this case a gas or electric booster is used to heat the water.
PIPE POLE GI / NON GIOCTOGANOL POLE GIHI-MAST - 12 / 16 / 20 / 25 / 30 MTR
We also manufacture distribution panels which are used in various industrial purposes. The main use of these distribution panels are in commercial complexes and industries for power supply.
we are offering our technically superior bus ducts. These bus ducts are required to facilitate transfer of high current, which can't be carried via cables on account of high losses occurring in them. So by using these bus ducts you can reduce your power losses. Depending upon the construction type, they can be divided in two parts- conventional bus duct and compact bus duct.
we offer power control centre (pcc) to clients, which are an innovative method for packing electrical equipments for installation. The control centres are modular, climatized and are designed, wired, tested and factory assembled with all the electrical equipments installed inside it. We can design these power control centres as per the requirement of the client at most competitive prices.
we offer mcc panels, which finds wide application in different industries such as sugar industry, paper industry, cement industry, food industry, chemical industry, etc. Some of the salient features of our product are-
We are presenting our 415 V automatic mains failure panel. It is used to operate diesel engine in case of failure of mains. The AMF with the help of relays, senses the conditions generated because of mains failure and switches on the DG. These panels are used in critical applications where consistency of power supply is a must.
We design and manufacture Control Desk with fiber glass or acrylic mimic diagrams. These are completely equipped with annunciation equipment and are designed and manufactured for all types of Process Control Industries. These control desk can be offered on custom basis also.
We are a leading manufacturer of feeder pillar which are used in electrical industry. These are manufactured using the latest technology in the industry and are meeting the various needs of the industry.
We manufacture purged panels for MPL & TPL that are supplied in the category of 2A, 2B classification for petrochemical industries where fire hazards are likely to occur due to presence of flammable gases or dusts in the plant. The system pressure level shall be maintained higher than the atmospheric pressure level. This system also has facilities to communicate with DCS and operated from the same. Our main customers in this product category are Manali petrochemicals and Tamil Nadu petrochemicals.
These 33 kv panels are manufactured by us using state-of-the-art technology and advanced machines. These are widely used for:Protection and Control for Transformers. Protection and Control for Transmission and distribution lines.
Protection and Control for Bus Section and Bus Coupler.
It better to take the preventive measures instead of curing the defects after they have occur. Keeping this in mind, we provide the preventive maintenence services to our customers at effective prices. Therefore, the cost occur in the curing of the H.T Panel is more than that can occur in prevention. These kind of services are highly famous among our customers.
We are the manufacturers & suppliers of 11 KV / 33 KV, High Voltage Metering and Switching, High Voltage Metering Panel, High Voltage Vacuum Circuit Breaker Panel, Load Break Switch, HT LBS Panels, Metering And Switching Panels, Metering Panels, VCB Panels, RMU Panels.
We are providing a wide range of A.M.F panels that are designed by our highly experienced engineers who leave no scope for any flaw that might adversely affect its functioning. Used for automatic controlling of DG sets, our array of A.M.F panels are available in a range of 1250 kVA. It is provided with all the essential safety features that are required for Engine and alternator safety.
The AMF or auto mains failure panel we offer to customers are used to automatically changeover from main electricity supply to a stand by generator at the time of failure of the main supply. When the main supply is restored, the system changes back and stops the genset automatically. We provide the panel with interlocked MCB's or pole contractors. Some of the areas of application of our products include : AgricultureProcessing plantsHospitalsOfficesEducational institutesEngineering unitsGenerators
These are used to sense numerous conditions and accordingly to operate corresponding devices. These include sensing of over current, earth fault, low transfer oil, winding temperature, status of trip circuit.
These Panels are manufactured using soft starters for various ratings of Motors to achieve optimal level of power consumption and linear acceleration and deacceleration for pumps/motors.
A practical way of installation of power and instrumentation cable easier, quicker and economical. We also manufacture cable Trays as per Customer's designs and specifications to their full satisfaction and at most competitive prices.
