Increase Production Profits Vibration has been very fascinating subject for man since ancient times. With the advent of new technologies, man has mastered the art of creating and controlling vibrations. In our design of the bowl feeder, the vibrations are created in spiral fashion so that, the components placed on the bowl which is fixed to the vibrating unit start moving round and round. The bowl being custom built for the perticular component, has a peculiar geometry. As component moves round and round up the track till it gets oriented and comes out in the desired form. This process of orienting is very useful on assembly line and packing operations, as no manual labour is employed for feeding of components. Experience At “VIBRO” we have 35 years of experience manufacturing various designs of vibrating equipments. We have catered to the requirement of Food, Glass, Breweries, Ceramic, Electronic, Plastic, Petrochemical, Pharmaceutical and the Electrical Industry. Range We manufacture bowl feeder from a small 200mm. diameter bowl to 1000mm. diameter bowl in M.S. or S.S. Each bowl is designed and manufactured according to the need of customer to give proper orientation and trouble free service. Bowl Feeder Operating Principle The bowl feeder works on D.C Pulsating supply obtained from converting 230 V.A.C. Single phase by use of rectifier and thyristor circuit. Each unit is supplied with a control panel to supply D.C. Power to the vibrator and control the feed rate. As the supply frequency is 50 HZ, the bowl feeder operates at 3000 vibrations per minute at 1.5 mm amplitude (maximum).

The electromagnetic vibratory feeder consists of a tray made of mild steel and a body housing the electromagnet. The tray which is connected to the armature of the magnet vibrates as the magnet gets energised. The vibration sets the material in motion. Controlling of vibration gives the controlled flow of the material. The body housing the electromagnet is made in totally enclosed design to prevent dusting. Useful to any continuous process industry where automatic controlled flow of material is required. The electromagnetic vibratory feeder consists of a tray made out of mild steel or stainless steel and a body housing the electromagnet. The tray which is connected to the armature of the magnet vibrates, as the magnet gets energized. The vibration sets the material in motion. Controlling of vibration gives the controlled flow of the material. The body housing the electromagnet is made in totally enclosed design to prevent dust going inside.

Electromagnetic vibrating table consist of solid base plate and a vibrating top. The top platform vibrates at 3000 vibrations per minute through an electromagnet housed inside. Each table is supplied with a control panel, which supplies pulsating current to electromagnet and also controls the amplitude of vibration. Control panel operates on 230 V.A.C. single phase Used for packing of products. Testing of welding joints. Eleminating vords in moulded parts. Achieving uniformity in ceramic moulded parts.

• FeaturesFor inclined discharge chutes to produce an easy flow., For rectanguler or cylindrical bin with centre discharge.

The electromagnetic impact type vibrator consists of main body which houses the coil. The coil is fed with pulsating current that sets in the vibration. The amplitude of vibration can be controlled by controlling the input voltage. The vibrators are easy to install and use and need no maintenance. The intensity of vibration can be varied if needed by providing regulator in the control panel. Most ideal for declogging of hoppers and chutes Used for conveying products which will not normally move on slope

Increase Production Profits Vibration has been very fascinating subject for man since ancient times. With the advent of new technologies, man has mastered the art of creating and controlling vibrations. In our design of the bowl feeder, the vibrations are created in spiral fashion so that, the components placed on the bowl which is fixed to the vibrating unit start moving round and round. The bowl being custom built for the perticular component, has a peculiar geometry. As component moves round and round up the track till it gets oriented and comes out in the desired form. This process of orienting is very useful on assembly line and packing operations, as no manual labour is employed for feeding of components. Experience At “VIBRO” we have 35 years of experience manufacturing various designs of vibrating equipments. We have catered to the requirement of Food, Glass, Breweries, Ceramic, Electronic, Plastic, Petrochemical, Pharmaceutical and the Electrical Industry. Range We manufacture bowl feeder from a small 200mm. diameter bowl to 1000mm. diameter bowl in M.S. or S.S. Each bowl is designed and manufactured according to the need of customer to give proper orientation and trouble free service. Bowl Feeder Operating Principle The bowl feeder works on D.C Pulsating supply obtained from converting 230 V.A.C. Single phase by use of rectifier and thyristor circuit. Each unit is supplied with a control panel to supply D.C. Power to the vibrator and control the feed rate. As the supply frequency is 50 HZ, the bowl feeder operates at 3000 vibrations per minute at 1.5 mm amplitude (maximum).

The electromagnetic vibratory feeder consists of a tray made of mild steel and a body housing the electromagnet. The tray which is connected to the armature of the magnet vibrates as the magnet gets energised. The vibration sets the material in motion. Controlling of vibration gives the controlled flow of the material. The body housing the electromagnet is made in totally enclosed design to prevent dusting. Useful to any continuous process industry where automatic controlled flow of material is required. The electromagnetic vibratory feeder consists of a tray made out of mild steel or stainless steel and a body housing the electromagnet. The tray which is connected to the armature of the magnet vibrates, as the magnet gets energized. The vibration sets the material in motion. Controlling of vibration gives the controlled flow of the material. The body housing the electromagnet is made in totally enclosed design to prevent dust going inside.

Electromagnetic vibrating table consist of solid base plate and a vibrating top. The top platform vibrates at 3000 vibrations per minute through an electromagnet housed inside. Each table is supplied with a control panel, which supplies pulsating current to electromagnet and also controls the amplitude of vibration. Control panel operates on 230 V.A.C. single phase Used for packing of products. Testing of welding joints. Eleminating vords in moulded parts. Achieving uniformity in ceramic moulded parts.

• FeaturesFor inclined discharge chutes to produce an easy flow., For rectanguler or cylindrical bin with centre discharge.

The electromagnetic impact type vibrator consists of main body which houses the coil. The coil is fed with pulsating current that sets in the vibration. The amplitude of vibration can be controlled by controlling the input voltage. The vibrators are easy to install and use and need no maintenance. The intensity of vibration can be varied if needed by providing regulator in the control panel. Most ideal for declogging of hoppers and chutes Used for conveying products which will not normally move on slope