Our Product / Services
We are offering thermic fluid heater. Thermic fluid heaters are available in various capacities from 70, 000 kcalhr to 15, 00, 000 kcalhr and maximum working temperature of 300c. At nearly atmospheric pressure. We can also manufacture units which give maximum working temperature upto 380c. Ibr regulations are not necessary. These are good substitute for steam & electrical heaters. No water softening plants required. No scaling chocking problems, ideal for indirect heating.
We offer heat recovery units. Custom built economizer can be offered from exhaust flue gases generated by diesel engines, furnaces, boilers and other fired units to meet customers specific requirement. Innovative energy efficient systems like thermosyphon, flash steam generator, evaporator & super heater can be designed to replace existing traditional systems.
Custom built economizer can be offered from exhaust flue gases generated by diesel engines, furnaces, boilers and other fired units to meet customers specific requirement. Innovative energy efficient systems like thermosyphon, flash steam generator, evaporator & super heater can be designed to replace existing traditional systems. | ||||||||||||||||
6.Heat EXCHANGER | ||||||||||||||||
The VJHEATEX heat exchanger is the answer to all your in-line heating problems where your process simply needs to flow a little more readily. It allows you a little floor space due to effective heat transfer and efficient process design. | ||||||||||||||||
7.Softeners | ||||||||||||||||
VJ - SOFT provides every kind of application from hotels, resorts, hospitals to industries | ||||||||||||||||
|
We offer solid fuel fired units.wood pellet fuel is a biomass fuel manufactured from ground wood, waste wood, bark, and other combustibles which is pressed through dies at very high pressure. Wood pellets can be purchased in bulk or in bags. The energy content of pellets is more constant, than corn because of lower moisture content (4 -8%).as a rough approximation, 17.5lbs of wood pellets provide the same amount of heat as a gallon of heating oil. With these characteristics, wood pellets burn very efficiency. They are also very easy and safe to transport and store. Wood pellets have an average net btu rating of 8, 200 btulb. Corn is a fuel that is widely available in many parts of the country and can be used in the multi-heat boiler. Corn can be purchased in bulk or by the bushel (56 lb bags). the energy of content of corn is not constant, but approximately 20 lbs of corn is equal to a gallon of fuel oil. On average, the energy content of corn is between 8, 000 to 8, 500 btulb of dry matter. One btu (british thermal unit) is the amount of energy needed to heat one pound of water one degree fahrenheit. To get the net dry btu rating on corn one needs to factor in the moisture content. Average moisture content for corn is 12-15%. This gives corn an average btu rating of 6, 800 btulb.Wood Pellet Fuelis a biomass fuel manufactured from ground wood, waste wood, bark, and other combustibles which is pressed through dies at very high pressure. Wood Pellets can be purchased in bulk or in bags. The energy content of pellets is more constant, than corn because of lower moisture content (4 -8%).As a rough approximation, 17.5lbs of wood pellets provide the same amount of heat as a gallon of heating oil. With these characteristics, wood pellets burn very efficiency. They are also very easy and safe to transport and store. Wood pellets have an average net Btu rating of 8, 200 Btu/lb.
Cornis a fuel that is widely available in many parts of the country and can be used in the Multi-Heat boiler. Corn can be purchased in bulk or by the bushel (56 lb bags).
The energy of content of corn is not constant, but approximately 20 lbs of corn is equal to a gallon of fuel oil. On average, the energy content of corn is between 8, 000 to 8, 500 Btu/lb of dry matter. One Btu (British Thermal Unit) is the amount of energy needed to heat one pound of water one degree Fahrenheit. To get the net dry Btu rating on corn one needs to factor in the moisture content. Average moisture content for corn is 12-15%. This gives corn an average BTU rating of 6, 800 Btu/lb.