Mumbai, Maharashtra, India
Our Products
Vikay Junior Simba Machine / Ring Drilling Equipment for Underground Mines
Also known as Ring Drilling Equipment is designed specially for underground mines and Tunnel to drill in 360 rotation for conventional drilling, at any angle for small mines of 3 Meter radius. The same is easy to dismantle & easy to move from one place to another. Suitable application for drilling, tunneling, drifting & long hole drilling.
| Junior Simba | Standard Version |
| Pneumatic drifter | VK – 12 |
| Hole Diameter | 51 - 64 mm |
| Drill Rod Size | R32 |
| Drill Rod Length | 1.20 Meter |
| Drilling Length | 25 Meter Max. |
| Air consumption | 400 CFM @ 7 Kg/cm² |
| Drilling Rate | 4 Minute per Meter |
| Feed Beam | Screw Feed Type BMS-46 |
| Rod Catcher | Pneumatic Type BSP-10 |
| Ring Size | 1500 mm |
| Dimension in mm | 1780 x 1550 x 2600 (L x W x H) |
| Column Bar Height in mm | Closed - 2200 mm, Open - 3700 mm |
| Net Weight - Version | |
| - Standard | 1200 Kgs |
| - Lateral Movement | 1500 Kgs |
| Optional : | |
| a) Mini Version - for Small mines 2.4 Meter Radius | |
| b) Lateral Movement Version - For Parallel Hole Drilling | |
Vikay Pneumatic Slurry Pump for Underground Mines
Double Diaphragm Slurry pump designed for Shaft Sinking, Drives, decline, Ramps, Tunnels & Dams with the Head delivery of 40 70 Mtrs.
Available in two different models
| Model | KPD-250 | KPD-170 |
| Weight | 60 Kgs | 25 Kgs |
| Dimensions | 20" x 17" x 34" | 17" x 12" x 24" |
| Discharge | 250 - 400 lpm | 150 - 250 lpm |
| Head Capacity | 50 Meter Vertical | 35 - 40 Meter Vertical |
| Air Consumption | 90 - 100 cfm | 70 - 80 cfm |
| Air Pressure | 6 - 7 kg/cm² 80/90 psig | 5 - 6 kg/cm² 70/90 psig |
| Suction Size | 75 mm 3" | 50 mm 2" |
| Delivery Size | 50 mm 2" | 50 mm 2" |
| Suction Lift | 10 feet | 10 feet |
| Stroke Capacity | 90 - 100 Per Minute | 60 - 80 Per Minute |
| Max. Size of Solid | 10 mm 3/8" | 8 mm 5/16" |
| Lubricant | Servoneum 100 | Servoneum 100 |
| Self Priming | Yes | Yes |
| Submersible | Yes | Yes |
| Material of Construction | Alluminium Alloy Casting | Alluminium Alloy Casting |
Pneumatic Ventilation Fan is designed for underground mines, tunnels, Gold mines and Shaft Sinking, to remove Blasting Fumes very quickly and deliver fresh air into the mines. Over all weight 25 Kg. completely balanced to run at 4000 RPM. Fitted with precision ball and roller bearing for long life.
| Air Supply | Air consumed | Volume of Ventilated air at distance | ||
| 200 feet | 600 Feet | 800 Feet | ||
| 60 psig | 63 cfm | 3500 cfm | 2500 cfm | 2000 cfm |
| 70 psig | 71cfm | 4000cfm | 2750cfm | 2250cfm |
| 80 psig | 82 cfm | 4250 cfm | 3000 cfm | 2500 cfm |
Vikay is a Global Supplier of Pneumatic Drifter Model VK 12 from India
Vikay top Hammer Heavy Duty Rock Drill / Pneumatic Drifter Model VK-12
The Drifter is Rifle-Bar rotated heavy duty Rock Drill mounted on Rig for drifting and tunneling, making it ideal for such application as bench drilling in open-pit mines and Lime stone quarries, in underground Mining and Tunneling for Ring Drilling and Face Drilling, with the feature of reversible Rotation, which can also be disengaged so that only impact mechanism works
| Model | VK-12 | |
| Weight | 70 Kgs | 154 lbs |
| Overall Length | 780 mm | 30 3/4" |
| Air Consumption | 167 l/s | 354 cfm |
| Working Pressure Max. | 7 bar | 100 psig |
| Piston Diameter | 120 mm | 4 3/4" |
| Piston Stroke | 65 mm | 2 1/2" |
| Impac Rate | 35 Hz | |
| Impact Power Max. | 7.2 kW | |
| Rotation Speed | 0 - 210 rpm | |
| Hole Diameters | 48 - 76 mm | |
| Drill Steel | R32, R38, T38 |
It is designed specially for underground mining to drill in 360 rotation for conventional drilling, at any angle for small mines specially for 2.4 Meter radius. The same is easy to dismantle & easy to move from one place to another. Suitable application for drilling, tunneling, drifting & long hole drilling.
Rock Drill VK-65 Replacement Parts
Vikay Mining Equipments is a global supplier of new aftermarket replacement Parts for Vikay Rock Drill Model VK-65 from India
Paving Breaker also known as Concrete Breaker is a high productivity tool, suitable for Demolition of Concrete, digging of asphalt, rock outcrop & digging of hard clay and laterite trenching work
This Paving Breaker is made from Top Quality Raw Material. The Valves, Pistons and other moving parts are made from Shock resistant Tool Steels, Heat treated to a specific rockwell hardness of toughness and durability. The Handle, Front Heads, Back Heads, and Cylinders are made from Carbonizing of Drop-Forged exceptionally Hard Alloy Steel.
Features
| Model | VK-11 | |
| Weight | 38 Kgs | 84 lbs |
| Overall Length | 710 mm | 27" |
| Air Consumption | 42 l/s | 88 cfm |
| Piston Diameter | 57.15 mm | 2 1/4" |
| Piston Stroke | 165 mm | 6 1/2" |
| Shank Size | 31.7 x 152.4 mm | 1 1/4" x 6" |
| Hose Size | 19 mm | 3/4" |
| Blows per Minute | 1200 bpm |
Pneumatic Air Mover designed for Underground Mines, Shaft Sinking and Tunnels for Air Filtration and better breathing.
It operates on the venturi principle whereby you take small volumes of high velocity air through the casting and out the nozzle jets, creating a venturi action or putting action that induces large volumes of low velocity air through the venturi and out the air Diffuser.
| Air Compressor which is Non-Lubricated, Two Stage, 8 Bar, Double acting, Reciprocating, Horizontal Balanced opposed, heavy duty, water cooled, with force-feed lubrication to all bearings, Compressor sheave with fly wheel effect. |
SCOPE OF SUPPLY
|
DRIVE MOTOR
|
PANEL
|
LOWOIL PRESSURESWITCH
|
INTELLIGENT COMPRESSOR CONTROLLER Advanced microprocessor based control system ensure trouble free operation and safety of compressor by displaying preventive maintenance indication and tripping the compressor. Controller controls and displays on line pressure, displays Automatic loading and unloading of compressor, Temperature, Total run hour with load on run hour, Amp of motor. |
The VSD is soft starting which allows for controlled acceleration and deceleration this results in reduced stress on mechanical components and enhanced system reliability which extend the life of the compressor.
There is a significant saving with variable speed operation over the entire life of compressor. With the help of VSD compressors precisely control system pressure to 2 psig using highly accurate sensors to control motor speed. This eliminates "overpressurizing" and increases energy savings - after all every 2 psig saved in overpressurizing reduces power consumption by 1%.
| Bit Shank |
| DHD 340 |
| No Foot Valve Required |
| Suitable Bit Size |
| 4 1/2" To 6 1/2" |
Junior Simba - Lateral Movement Version Specially for Parallel Hole Drilling
Also known as Ring Drilling Equipment is designed specially for underground mines and Tunnel to drill in 360 rotation for conventional drilling, at any angle for small mines of 3 Meter radius. The same is easy to dismantle & easy to move from one place to another. Suitable application for drilling, tunneling, drifting & long hole drilling.
Airline Lubricator is ideally designed to provide adequate lubrication to Pneumatic Tools which is very much essential for their efficient working and upkeeping of its performance, improving the functioning of pneumatic equipment, reduces wear & tear, and increases productivity.
| Description | Metric | Imperial |
| Capacity Air Flow | 1.5 - 8.0 m3/min | 53-282 |
| Oil Volume | 1.3 Ltrs | 0.29 Gallons |
| Weight | 3.0 Kgs. | 6.6 lbs |
| Max. Working Pressure | 20 bar | 290 psi |
| Hose Dia Inside | 25 mm | 1" |
| Connecting Thread | 1" B.S.P. |
The High Quality breaker accesories for use with most types of Pneumatic Paving Breaker & Hydraulic Breaker. All Our Tools are manufactured from Specially selected low carbon steel with heat treated in most modrern full process control heat treatment plant
Suitable For Cp-117, 1230, 1240, 1260 1290 - shank size 1.1/4" x 6" Hex
| Description - Length ( under coller) x Shank | Part Number | Shank Length | Length ( under coller) | Total Length |
| Peg Point / Moil Point | 8900010000 | 6" | 12" | 18" |
| Peg Point / Moil Point | 8900010001 | 6" | 18" | 24" |
| Peg Point / Moil Point | 8900010002 | 6" | 24" | 30" |
| Chisel Point | 8900010003 | 6" | 14" | 20" |
| Chisel Point | 8900010004 | 6" | 18" | 24" |
| Chisel Point | 8900010005 | 6" | 12" | 18" |
| Chisel Point | 8900010006 | 6" | 24" | 30" |
| Suitable For Cp-9 | ||||
| Chisel Point | 8900010013 | 9" | ||
| Peg Point / Moil Point | 8900010014 | 9" | ||
| Suitable For Cp-14RR, 222 shank size 7/8" Hex | ||||
| Peg Point / Moil Point | 8900010015 | 15" | ||
| Chisel Point | 8900010016 | 14" | ||
| Chisel Point | 8900010017 | 18" | ||
| Suitable For Cp-4123 | ||||
| Hex Chisel | 8900010018 | 9" | ||
| Hex Chisel | 8900010019 | 12" |
1.5 HP Bare Vacuum Pump Model V285
PFC Parts for Compressor is a global supplier of 1.50 HP Single Stage & Two StageBareVacuum Pump Model V285 from India
DryBarevacuum pumps are single acting , air cooled reciprocating units in single and two stage constructions These piston type vacuum pumps achieve vacuum up to 29.0Hg (737 mm ) for single stage and up to 29.6Hg (752mm) for two stage configuration
Scope of Supply
Bare Pump (Compressor / Vacuum Pumps) with Flywheel, without any Accessories
# Parts are interchangeable IR Type 30 Model V235
PFC Parts for Compressor is a global supplier of Single and Two Stage Dry Bare Vacuum Pumpfrom India.
These Dry Bare vacuum pumps are single acting , air cooled reciprocating units in single and two stage constructions These piston type vacuum pumps achieve vacuum up to 29.0Hg (737 mm ) for single stage and up to 29.6Hg (752mm) for two stage configuration
These dry Type Vacuum Pump ideally designed for Printing, Plastics, Material Handling, Food Processing Packing, health care and many other Industries.
