Our Products
Industrial & Engineering Products
2 Products availableBasic Dyes
2 Products availableDisperse Dyes
2 Products availableDye Intermediates
1 Products availablePetrochemicals & Petroleum Products
1 Products availableOur offered Product range includes ROAD & RAIL TANKER HOSE, Conveying Concentrated Chemicals, AIR, PNEUMATIC & ROCKDRILL HOSE, PHOSPHORIC ACID SUCTION and Power Hose.
End connections
Normally flanged type or threaded nipple i .e. built in
type / vulcanize / crimped / swaged in hose.
Couplings
As per BS 2464 or Lug type or Camlock type. Male or
female or both end male or female as per requirement of
purchaser.
Application
Discharging of petrol and diesel oil from tank truck &
between tank, & trucks & trailers, suitable for pressure,
vacuum and self discharge . Very low deformation where
used for petrol.
| I .D . in mm |
Working pr. |
Min . bend |
Working pressure |
Min . bend |
||||||
| 32 | 3.5 | 130 | 7.0 | 190 | ||||||
| 38 | 3.5 | 150 | 7.0 | 230 | ||||||
| 50 | 3.5 | 200 | 7.0 | 310 | ||||||
| 63 | 3.5 | 260 | 7.0 | 380 | ||||||
| 76 | 3.5 | 310 | 7.0 | 460 | ||||||
| 100 | 3.5 | 410 | 7.0 | 560 | ||||||
Reinforcement
Multiple plies rubber impregnated strong woven fabric with
helical steel wire, full-vaccum and discharge pressure, that
vary according to size. Flexible construction keeps hose
round when bend, reducing kinking and damaging.
| Application |
| A new generation hose for general construction work, engineering industries, garages, shipyards, workshop, foundries, steel mills, irrigation projects and a wide rang of applications for both air & water. - Natural Rubber Tube.- Textile reinforcement.- Abrasion and whether resistant cover. Reinforcement Shall be either woven fabric well rubberized |
|
Nominal I.D. (mm) |
MEAN O.D. (mm) |
WORKING PRESSURE |
| 12.5 | 21 | 12 |
| 19 | 30 | 12 |
| 25 | 37 | 12 |
| 32 | 44 | 12 |
| 38 | 50 | 12 |
| 50 | 61 | 12 |
| 63 | 76 | 10 |
| 75 | 91 | 10 |
| 100 | 115 | 10 |
| Application: | |
| These hoses are very flexible allowing full flow and pipe line made with abrasion & acid resistant available with or without wire reinforcement. Wire reinforcement type has coil of steel wire buried in hose to keep it from collapsing under full suction. Used in both suction & discharge hose. Flanged ends are drilled to bolt to companion flanges using standard flat faced flanges. They provide a tight seal without a gasket since the flanges rotate freely. Alignment of bolt holes is easy, reducing installationtime to a minimum. | |
Application
Transparent hose for a wide of applications like air, irrigation and general purpose.
Construction
- Transparent plasticized PVC tube.
- High tensile synthetic textile reinforcement.
- Abrasion, ozone and weather resistant
|
Nominal I.D. (mm) |
MEAN O.D. (mm) |
WORKING PRESSURE |
| 6 | 12 | 25 |
| 8 | 14 | 25 |
| 10 | 17 | 25 |
| 12 | 19 | 20 |
| 15 | 22 | 20 |
| 20 | 28 | 20 |
| 25 | 34.6 | 15 |
| 31 | 40.6 | 15 |
| 40 | 50 | 15 |
| 50 | 62 | 10 |
Construction:
- Special PVC compound resistant tube to pesticides and
fertilizers.
- High tensile synthetic textile reinforcement
- Abrasion, ozone and weather resistant special PVC
compound cover.
|
Nominal I.D. (mm) |
MEAN O.D. (mm) |
WORKING PRESSURE |
| 10 | 18 | 50 |
| 12.5 | 21 | 50 |
| 20 | 28 | 40 |
| Construction:- Extremely light and flexible plasticized PVC.- Shock resistant PVC spiral.- Crushing, chemical agents, abrasion and weather resistant, corrugated outside. | |
|
Nominal I.D. (mm) |
MEAN O.D. (mm) |
WORKING PRESSURE |
| 21 | 28.6 | - |
| 25.4 | 32.1 | - |
| 31.8 | 38.64 | - |
| 38 | 45.0 | - |
| 50.8 | 57.2 | - |
| 60.5 | 68.5 | - |
| 76.5 | 83.54 | - |
| 101.2 | 108.94 | - |
| 127 | 135.2 | - |
| 152.4 | 161.1 | - |
| 204 | 214.4 | - |
Construction:
- Strong flexible and smooth non-toxic plasticized PVC .
- Stock resistant PVC spiral.
- Crushing, abrasion and weather resistant, light corrugated
outside.
|
Nominal I.D. (mm) |
MEAN O.D. (mm) |
WORKING PRESSURE |
| 25 | - | 7 |
| 32 | - | 7 |
| 38 | - | 6 |
| 51 | - | 5 |
| 63 | - | 4.5 |
| 76 | - | 4 |
Construction:
- Strong flexible and smooth non-toxic plasticized PVC.
- Shock resistant PVC spiral.
- Crushing, abrasion and weather resistant, light corrugated
outside.
|
Nominal I.D. (mm) |
MEAN O.D. (mm) |
WORKING PRESSURE |
| 25 | - | 7 |
| 32 | - | 7 |
| 38 | - | 6 |
| 51 | - | 5 |
| 63 | - | 4.5 |
| 76 | - | 4 |
STANDARD DUTY-SPG
Standard Duty Aviation Fuel Suction and Discharge composite hoses are design for handling Aviation fuel, lubricant where light weight and high flexibility is required.
APPLICATION
COMPOHOSEhoses and hose assemblies are recommended for Rail Tank Wagon, Tank Truck Loading and Unloading, Storage tanks transfers and other standard duty applications.
COMPLIANCE
Standard Duty Aviation fuel suction and discharge composite hoses are manufactured in accordance to EN13765/2010 Type 2.
PRODUCT HANDLE
Specially for Aviation Fuel, Superior Kerosene & also can be used for gasoline, diesel fuel, paraffin, kerosene, lubricating oils and 100% aromatics as well as black oils and heavy lubricants and solvent not recommended for corrosive and aggressive chemicals.
FEATURES
1. Complete product compatibility for safe handling of Aviation Fuel & Superior Kerosene.
2. Light Weight & Highly Flexibles makes it easy to handle in loading and delivery.
3. Tough PVC outer cover resists to dragging, wear, abrasion, UV and ozone resistance having maximum durability and safety.
4. Double end to end electrical continuity prevents static electricity build up and internal arcing.
5. Suitable for 0.9 Bar Vacuum rating.
CONSTRUCTION