Mumbai, Maharashtra, India
Our Products
It is used to plaster with a machine on the surface with high speed (200 square meters per day). This is a part of light weighting product group and hence it is considered in the group of modern building materials. This mortar is sprayed by a machine in the world, although it is possible to use it manually. In addition to high speed performance, this mortar has thermal insulation, humidity insulation and sound insulation and its specific weight is less than the normal plaster. This product provides the possibility for the plasterer to work more time on the plaster and form it is a desired state due to high setting time (3-4hours). Wear resistance, scratch resistance, minimal waste, single layer, harmless for the skin, flexibility, fire resistance, no need for resin coating before painting are its another features. Its vapor diffusion coefficient (micro) is about 8. Its thermal conductivity value is W/MK 0.35.
This product can be used as a single layer on the various surfaces such as brick, porous concrete blocks, concrete surfaces, light concrete blocks, cement screeds and even foam. This product is primary and secondary coats and applicable for all large and medium projects. Suitable adhesion, appropriate coating without need for the additives, retardation, minimal waste and eliminating the additional operation are the remarkable characteristics of this product .This mortar is miscible with cold water (not tepid or warm water) and while using, any other additives arent added to this product.
| Salient Features : | |
| |
| Basic Important Facts : | |
| The consumption of Gypsum Plaster is directly related to the line & level of the walls in the building, which is a variable factor. It also depends upon the basic wall base material i.e. Bricks/Blocks. Based on field trials & experience, the consumption pattern of Gypsum Plaster varies between 1.5 kg. in a right angle finish on the walls. It is advisable to do a mock up of a entire flat in your building to ascertain the actual consumption pattern of Gypsum Plaster. | |
| Guidelines For Application : | |
|
We are counted amongst the foremost traders and suppliers of high quality range of Vermiculite In Gypsum Plaster. Vermiculite In Gypsum Plaster. 1) High quality. 2) Reasonable price. 3) Delivery on time. 4) Quality Assurance.
We are manufacturing Retarders for plaster of paris. It is a very fine powder that is obtained by heating Gypsum. We are among the renowned suppliers of Retarder Plaster of Paris that is used extensively by the construction industry in the interiors as well as exteriors of the walls.
PRODUCT CATEGORY :- CONSTRUCTION & REAL ESTATE >> MASONRY MATERIALS >> GYPSUM POWDERPRODUCT DETAILS :- PLACE OF ORIGIN MAHARASHTRA, INDIAPRODUCT NAME :- RETARDERS FOR GYPSUM PLASTERMore Keywords :-retarders for plaster of paris, gypsum retarder compound We are the producer and exporter for gypsum retarders use to produced plasters of various setting time and enhancing properties
KEY PROPERTIES :-cost-effective thixotropic agent for mineral-based construction systems Improved ease of application and surface smoothness Increased sag resistance and softness Decreased pumping pressure and stickiness on tools Anti-sedimentation and anti-bleeding Stability against bacteria and enzymes . Plasters, Renderings and Stucco1- Lime cement plaster2- EIFS plaster and adhesive system3- Emulsion plasters/synthetic stucco4- Skim coats5- Gypsum plasters6- MortarsJoint fillers Plasterboard jointing compounds Gypsum, latex and cement pointing compounds . Screeds and Underlayments Self leveling flooring compounds Cementitious and gypsum anhydrate screeds .
LEVELS OF USE
The usage and dosage of retarder will depend on nature and purity of gypsum plaster The level of addition depends on the desired consistency of the system. Typical levels range from 0.1% - 3.0% additive, based on total formulation.
In plasters typically 0.1% - 0.3% are used can be combined with other thickening agents.
Potential Health Effects
Inhalation :-Acute inhalation not expected to result in adverse effects.Prolonged inhalation may cause respiratory tract irritation.Effects include: No other effects expected unless listed below.
Eye ContactEye contact causes irritation.
Skin ContactSkin contact causes irritation.Prolonged skin contact can result in irritation causing redness and itching.
Skin AbsorptionNot expected to be harmful if absorbed through the skin.
IngestionHarmful if ingested.Effects include: Nausea, pain, vomiting, diarrhea and digestive tract irritation.
FIRST AID MEASURESSkin ContactWash with soap and water.If discomfort or irritation persists, consult a physician.Remove contaminated clothing and wash before reuse.
Eye ContactFlush eyes with water for at least 15 minutes while holding eyelids open. If discomfort orirritation persists, consult a physician.
IngestionRinse mouth with water. Give the person one or two glasses of water and then consult physician.In extreme emergency, induce the victim to vomiting under professional supervisions.
InhalationNo hazard in normal industrial use. If symptoms develop, get fresh air, and if symptoms persist, consult a physician. If breathing has stopped, give artificial respiration then oxygen if needed.
HANDLING AND STORAGE
Precautionary MeasuresAvoid contact with eyes, skin and clothing.Do not take internally.Practice good personal hygiene to avoid ingestion.Use only with adequate ventilation.Wash clothing before reuse.
FOR PROFESSIONAL USE ONLY. KEEP OUT OF CHILDRENS REACH.
EXPOSURE CONTROL /PERSONAL PROTECTIONEngineering MeasuresVentilation must be adequacy.
Personal Protective EquipmentCommon rules:D o not eat, drink and smoke at working place. Avoid to longtime contact the substance and breathe the dust of the substance. Change the contaminated clothing and wash it.
Respiratory ProtectionNecessary
Skin ProtectionRubber or other impervious gloves should be worn to prevent skin contact.
Eye ProtectionAt minimum, safety glasses with side shields should be worn where exposure to excessive dust or spry is likely.
Work/Hygienic PracticesUse good personal hygiene practices. None beyond those noted above.
STABILITY AND REACTIVITYStorageKeep away from the heat, direct sunlight and fire.
Conditions To AvoidStrong oxidant.
Hazardous Decomposition ProductsThis substance will not decompose hazardously.
OTHER INFORMATION
| Salient Features : | |
| |
| Basic Important Facts : | |
| The consumption of Gypsum Plaster is directly related to the line & level of the walls in the building, which is a variable factor. It also depends upon the basic wall base material i.e. Bricks/Blocks. Based on field trials & experience, the consumption pattern of Gypsum Plaster varies between 1.5 kg. in a right angle finish on the walls. It is advisable to do a mock up of a entire flat in your building to ascertain the actual consumption pattern of Gypsum Plaster. | |
| Guidelines For Application : | |
|
UNIVERSAL |
UNIVERSAL FINE | UNIVERSAL SUPER FINE | |
| Colours of Finished Surface | Off White | White | Super White |
| Bulk Density kg/m³ | 1250 | 1120 | 1050 |
| Setting Time/minutes | 20-25 | 25-30: | 30-35 |
| Coverage of 25 kg Bag at 13 mm (Thickness) | 16-17 sq.ft | 18-19 sq.ft: | 20-21 sq.ft |
| Compressive Strength kg/cm² | 65-75 | 70-80 | 70-80 |
|
Specifications |
Valves |
Units |
|
Dimensions |
66.6 x 50 x 10 |
Centimeters |
|
Weight (each panel) |
21 - 24 |
Kg (Producible 12 – 24 Kg.on demand) |
|
Weight per square meter |
63 |
Kg ( Producible 41 – 72 kg/m2) |
|
Pressure Resistance |
66 |
Kg/cm2 |
|
Bend Resistance |
11 |
Kg per Cm |
|
Temperature Quotient (K) |
1.94 |
Kcal/Hr.c |
|
Temperature Quotient (?) |
0.31 |
Kcal /Hr.c |
|
Acoustics Quotient |
38 |
Db (500 HZ) |
|
42 |
Db (1000 HZ) |
