Our Products #8263546

Type: Ball Bearing Cages

Model: All Type Cages

Material: Steel, Nylon, brass, polymer

Dimension:

Shape: Round,

Material Grade: As Per Customer Requirement

Packaging Type: As Per Customer Requirement

Certificate:ISO 9001:2015 certified

Brand: OEM

Label:

Origin: India

DESCRIPTION:The ball bearing cage (also known as a ball bearing retainer or ball separator these are used interchangeably), is the component in a ball bearing that separates the balls, maintains the balls symmetrical radial spacing, and in most cases, holds the bearings together. Cages can also be utilized in providing lubrication by acting as a reservoir for oils, or by supplying a solid film via the cage material itself or a coating on the cage. The designers selection of the appropriate cage design for the application is essential in achieving the desired life and performance of the bearing.

Ball bearing cages are guided by one of the available surfaces between the inner and outer rings. There are inner land riding retainers where the retainers bore slides, or is guided by, the O.D. of the inner ring, Outer land riding retainers where the O.D. of the retainer slides, or is guided by, the bore of the outer ring, and ball riding retainers where the retainers touch neither ring and is totally guided by the balls.

Unfortunately, all cages produce frictional forces that increase the starting and running torque in the bearing due to their rubbing contact. As a result, cages are available in a variety of configurations and materials that enhance performance in torque sensitive applications, at higher speeds, or in extreme environments. Some designs are limited in use in certain types of bearings depending on the size and configuration of the bearing. However, there are four basic types of cages that are the most common, readily available, and will perform well in most applications. The four types of cages are theJ-type, W-type, RJ-type, andTW-type. Each cage is described in detail below in addition to some of the other less commonly used ball bearing retainer types.

Applications: we offer Textile Bottom Roller Bearing Cage, Cam Flower Bearing Textile Nylon Cage and Cylindrical Roller Bearing Polyamide/Nylon Cage from India

CATEGORY:Ball Bearing, Textile Spindle, roller Bearing cam and Flower Bearing cylindrical roller bearing

Spindles for Spinning and Twisting
Twisting Spindle
Twisting spindle for heavy yarn application with precise accuracy & tolerance.
Maximum Spindle speed 5, 500 rpm.
Yarn application tire cord, Fishnet, Glass fiber, Industrial yarn.
Spinning Spindle
These spinning spindles are manufactured with high precise facility and sandwich design to optimize high speed with a low noise level and less energy consumption.
Minimum wharve dia 18.5 mm.
Maximum Spindle speed 18, 000 rpm.
Count range NE 14.0 NE 100.

Type:Angular contact ball bearing

Model: All Type Bearing Model

Material: Mild Steel High-Carbon Chromium Steel

Dimension:

Thickness: 0.3mm to 10mm

Bore Diameter 10-100 mm

Material Grade: As Per Customer Requirement

Packaging Type: As Per Customer Requirement

Certificate: Company -D&B

NSIC ISO 9001:2008

Brand: OEM

Label:

Origin: India

DESCRIPTION:There are threetypesofball bearings:angular contact(which we'll discuss shortly), axial, and deep-groove. Regardless of thetypeofball bearing, their purpose is to reduce rotational friction and all are able to support both axial and radial (or thrust) force. For reference, bearingsmove around a fixed axis.

Angular contact ball bearings have inner and outer ring raceways that are displaced relative to each other in the direction of the bearing axis. This means that these bearings are designed to accommodate combined loads, i.e., simultaneously acting radial and axial loads.

The axial load carrying capacity of angular contact ball bearings increases as the contact angle increases. The contact angle is defined as the angle between the line joining the points of contact of the ball and the raceways in the radial plane, along which the combined load is transmitted from one raceway to another, and a line perpendicular to the bearing axis.

Applications

Here are examples of applications in which angular contact ball bearings might be used:

Industrial pumps

Industrial gearboxes

Renewable energy

Compressors

Industrial electric motors & generators

Trucks, trailers and buses

Metals

CATEGORY:Angular contact bearings are ideal for use in gearboxes, pumps, electric motors, and clutches or other high-speed applications. They are commonly used in the Materials Handling, Machine Tool, SteelMill, and WindEnergyindustries

Type: ball bearing

Model: All Type Bearing Model

Material: Mild Steel High-Carbon Chromium Steel

Dimension:

Thickness: 0.3mm to 10mm

Bore Diameter 10-100 mm

Material Grade: As Per Customer Requirement

Packaging Type: As Per Customer Requirement

Certificate: Company -D&B

NSIC ISO 9001:2008

Brand: OEM

Label:

Origin: India

DESCRIPTION: A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads.

Deep groove ball bearings are the most widely used bearing type and are particularly versatile. They have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.

The bearing catalogue lists a large range of designs, variants and sizes of deep groove ball bearings. Beyond our catalogue offering, the Explorer deep groove ball bearings are customizable to offer advantages for applications with specific performance needs

Applications:

Deep groove ball bearings are the most widely used bearing type and are suitable for many different industries. Matching that versatility across many different applications, they are available in a wide range of designs, variants and sizes. Here are examples of applications in which deep groove ball bearings might be used:

Electric motors and generators

Agriculture

Material handling

Industrial transmissions

Food and beverage

Industrial pumps

Industrial fans

Two and three wheelers

Cars and light trucks

CATEGORY: A ball bearing is a type of rolling-element bearing that serves three main functions while it facilitates motion: it carries loads, reduces friction and positions moving machine parts. Ball bearings use balls to separate two races, or bearing rings, to reduce surface contact and friction across moving planes.

Type: Needle roller bearing

Model: All Type Bearing Model

Material: Mild Steel High-Carbon Chromium Steel

Dimension:

Thickness: 0.3mm to 10mm

Bore Diameter 10-100 mm

Material Grade: As Per Customer Requirement

Packaging Type: As Per Customer Requirement

Certificate: Company -D&B

NSIC ISO 9001:2008

Brand: OEM

Label:

Origin: India

DESCRIPTION: needle roller bearings are bearings with cylindrical rollers that are small in diameter relative to their length. The modified roller/raceway profile prevents stress peaks to extend bearing service life.

Needle roller bearings are a bearing that is classified as either radial or thrust depending on the direction of the load being supported. Needle roller bearings include bearings whose rollers slightly exceed the size range of needle rollers as stipulated by ISO. Needle roller bearings include drawn cup and solid radial bearings, as well as application-specific cam followers, and roller followers. Thrust bearings include thrust needle bearings.

Applications

Here are examples of applications in which Needle Roller bearings might be used:

Typical applications for caged needle roller bearings are gearboxes, automotive power transmission systems, two and four stroke engines, planetary gear sets and air compressors.

CATEGORY: A needle roller bearing is a special type of roller bearing which uses long, thin cylindrical rollers resembling needles. Ordinary roller bearings' rollers are only slightly longer than their diameter, but needle bearings typically have rollers that are at least four times longer than their diameter.

• Capable of running spindle speed up to 25, 000rpm (mechanically)
• Double elastic viscous damping construction for LD bolsters for reduced noise & vibration.
• Grease placed between housings acts as 2nd damping.
• HL Insert is a single assembly from neck bearing at top to foot step bearing at the bottom. Hence, the center alignment from top to bottom and its geometric perfection is maintained which help in performance of Spindle at higher speed.
• HL Insert assembly comprises two radial bearings & one axial bearing.

• HLLD Bolster has a unique design construction for reduced noise and vibration
• Can handle higher radial loads and allow consistent running performance at higher speeds
• Vibration under control resulting in Noise reduction of upto 5 dBA and address noise pollution to a great extent
• Spindle Top Parts ensure excellent fitment of bobbin tube over its entire length for stable running of spindles
• Specially drawn aluminium rods ensure strength and suitability of the Top Parts

• State-of-the-art manufacturing facility
• Multi-stage inspection of spindles, guaranteeing all quality parameters

Type: wave Washers

Model: All Type washer Model

Material: Stainless Steel, Spring Steel, Carbon Steel

Dimension: 10mm

Thickness: 0.3mm to 10mm

Shape: Round, Wave, Belleville, Circular, Cone

Material Grade: As Per Customer Requirement

Surface Finish: Polished, blackening, Zinc Plated, Corm plating, Metal Coated, Chemical Coated, Electroplated

Packaging Type: As Per Customer Requirement

Certificate: Company -D&B

NSIC ISO 9001:2008

Brand: OEM

Label:

Origin: India

DESCRIPTION: Wave spring washers are curved in two directions, creating a wave-like shape.

Applications

Used most often as cushions or spacers.

CATEGORY: auto Washer, bearing Cover, Circlip, Flate Spring washer. Snap ring

, Push Lock Washer, SS Washer, Tab Washer, Textile Washer, Textile Washer, Spring Washer, Wave Washer.

Type: Clutch Bearing

Model: All Type Bearing Model

Material: Mild Steel High-Carbon Chromium Steel

Dimension:

Thickness: 0.3mm to 10mm

Bore Diameter 10-100 mm

Material Grade: As Per Customer Requirement

Packaging Type: As Per Customer Requirement

Certificate: Company -D&B

NSIC ISO 9001:2008

Brand: OEM

Label:

Origin: India

DESCRIPTION: A clutch release bearing unit engages and disengages the clutch, via the diaphragm spring and pressure plate. . The units are designed to account for many constraints, including: automated manual transmission or dual clutch transmission; higher operating temperature; and increased application loads.

A clutch release bearing unit engages and disengages the clutch, via the diaphragm spring and pressure plate. It includes provisions to guide the fork or piston radially.

Our compact design combines a precision sheet metal bearing unit and polymer sleeve or carrier, for manual gearbox applications against a dry clutch. We offer multiple designs with inner or outer ring rotation for a variety of applications.

The units are designed to account for many constraints, including: automated manual transmission or dual clutch transmission; higher operating temperature; and increased application loads

Applications

Here are examples of applications in which Clutch bearings might be used:

Paper moving for copiers, fax machines, paper towel dispensers, etc.

Exercise equipment

Appliances

Two-speed gearboxes

Rack indexing drives

Converters, non-return devices and transcendental clutches.

Fishing Reels, RC Cars, RC Helis, RC Engines

CATEGORY: When the clutch pedal is depressed, the throw-out bearing moves toward the flywheel, pushing in the pressure plate's release fingers and moving the pressure plate fingers or levers against pressure plate spring force. This action moves the pressure plate away from the clutch disc, thus interrupting power flow.