Chennai, Tamil Nadu, India
Our Products
Power saving is above 20% in lighting
No load currents is very low below 1% of the rated output current
On/off control can be achieved by time, dusk dawn control, PLC& manual mode
When used in manual mode all the control circuit is been bypassed directly, used in case of emergency
Compact in size, box can be custom designed as per the requirement of the customer
Programmable logic controller can be used for sequential, on/off for lights
Easy to install with existing control unit and cabling
Payback period is 8 to 12 months based on site conditions and usage
Low maintenance, No moving parts, easy to service
The Power Pack is used as a power source for VCB panel in substation where station battery supply is not available. Power pack gets charged from line connected PT. It can supply DC connected load for operation close/trip coils and other essential loads such as auxiliary supply to protection relay etc.
I/P Voltage Ranges : 110VAC or 230VAC
O/P Voltage Ranges : 12VDC /24VDC / 48VDC / 110VDC /220VDC
Input Burden without Load: 10mA to 25mA
Continuous Load : 90%
Impulse load : 110%
Battery : 7AH & 14AH 12/24V
Protection : Over voltage & Short Circuit
Indication : Charger ON , Output ON, Battery Operation, Output over load, Battery low, Battery Reverse
Applications
HT Panels for Auxiliary supply
LT Panels
We are Manufacturing Battery Charger up to 150A The thyristor controlled rectifier is fully a solid state equipment for providing constant Voltage and Constant current for the battery charging process.
Voltage Ranges : 12V, 24V, 48V, 72V, 110V, 220V( options are float, boost, trickle) & (Auto , Manual)
Types:
Float Cum Boost Charger
Float Charger & Boost Charger
Dual Float Cum Boost Charger
Float Charger &Float Cum Boost Charger
Features:
Automatic voltage regulation
Smoothening filter circuit
Short circuit and overload Protection
Over voltage cut-off keep load and battery bank secure
Automatic float/boost change over based on the current drawn by the battery
Conventional Design and High quality standards
Low maintenance, Remote operation, user friendly
Application
Battery charger can be used in following industries
Power Plants
Sub station
Cement Plants
Oil and Refinery Plants
Solar Projects
The KIOSK is specially designed for unmanned substations in the Outdoor distribution network. It is a standalone vacuum switchgear system with built in self-driven independent control supply for self-tripping & closing of CB. The product is well equipped for metering, control, protection & SCADA compatibility.
The product is available in two basic designs
Roof bushing type with incoming & outgoing through roof bushings (Rated Voltage: 12 & 36 kV)
Line up type with incoming through bottom, rear / side cable entry & outgoing through bus bar / cables (Rated Voltage:12 kV)
Insulation Level: 11kV : 28kV / 75kV Peak, 33kV : 70kV / 170kV Peak
Closing / Tripping Coil Voltage: 24VDC to 220VDC
Spring Charge Mechanism: 230VAC
Breaker Standard: IEC 62271 100, IS13318
Degree of Protection: IP4X & 5X
Ring Main Unit can also be provided with two number Load Break Switch with one number tee-off Vacuum Circuit Breaker with protective devices. It is highly flexible unit used in a wide range of applications including distribution switchboards, transformer substations, ring distribution networks and HV Connections to industrial & commercial sites. The units are developed to suit customer requirements for connection, supply, protection and sectionalizing with remote operation.
The CB comprises of 3 vacuum interrupters, which have a fault-make, fault-break rating. Earthing of the outgoing cable is achieved by the use of CB in series with the off-load disconnector / selector switch.
Ring Switch
These are fault-make load break switches utilizing a single break 3 position switches viz., ON, OFF & Earth functions.
Rated Voltage & Rated Current:12kV, 630A Up to 2000A
Frequency : 50Hz
Short Time Withstand Current And Duration: 26.3kA/3Sec
Insulation Level: 11kV : 28kV / 75kV Peak, 33kV : 70kV / 170kV Peak
Closing / Tripping Coil Voltage: 24VDC to 220VDC
Spring Charge Mechanism: 230VAC
Breaker Standard: IEC 62271 100, IS13318
Degree of Protection: IP4X & 5X
Model No : MV V12 LBS
Rated Voltage & Rated Current:12kV, 630A Up to 2000A
Frequency : 50Hz
Short Time Withstand Current And Duration: 26.3kA/3Sec
Insulation Level: 28kV / 75kV Peak
Breaker Standard: IEC 60265/ IS 9920
Degree of Protection: IP4X & 5X
USS is a prefabricated secondary substation with the combination of minimum voltage & switchgear, low voltage switchgear, Distribution Transformer and associated components of metering and protection, all fitted in one compact unit in accordance to the standards.
IEC 62271-202, IEC 1330(1995) and IS 14786:2000 Standards
Degree of Protection: IP4X & 5X
Construction : We manufacture Automatic Power Factor Control Panel to achieve unity/near unity power factor. The power factor controller of our APFC Panels monitors the reactive power which intern helps in saving energy.
Construction : Distribution Board is highly appreciated among clients for its features like reliable performance, sturdy corrosion and durability.
Features
Correction to Unit Power Factor
Modular design which allows easy handling by the user
Designed to minimize installation time & cost
Construction : These products conform to the illustrated parameters of theindustry. Our valued clients can avail this instrumentation panels in different technical specifications as per their requirement.
Features
User-friendly operation
Minimum maintenance
Longer service life
Efficient performance
In order to meet the diverse requirements of clients, we areoffering a superior range of Soft Starter Panels. This range of soft starter panels is widely acclaimed among the clients for the following features.
Construction Single / Double Front, Draw-out / Fixed Type with Microprocessor based along with VFD, Softstarters advanced motor protection relays.
For wide range of motor ratings.
Ratings : From 630A to 6000A (Draw out / Fixed Type).
Construction : Single front, Single / Two Tier Arrangement.
The legendary Indoor Vertical Isolation VCB is a preferred product in various Utilities & Indian Railways. The vertical isolation & horizontal draw-out truck ensures more ground space & provides higher degree of compactness than horizontal isolation trucks. The product comes with high rigidity & best in class control solutions.
Technical Details
Model No : 11KV: MV V12 I, 33kV : MV V36 I
Rated Voltage & Rated Current :12kV & 36kV, 630A up to 2000A
Frequency : 50Hz
Short Time Withstand Current And Duration: 26.3kA/3Sec
Insulation Level: 11kV : 28kV / 75kV Peak, 33kV : 70kV / 170kV Peak
Closing / Tripping Coil Voltage: 24VDC to 220VDC
Spring Charge Mechanism: 230VAC
Breaker Standard: IEC 62271 100, IS13318
Degree of Protection: IP4X & 5X
It is a highly sought product in the utilities distribution segment. The product is specially designed for outdoor application with rated voltage of 12 kV to 36 kV. Over the years, the product has undergone a frequent design improvement that brings you a sense of satisfaction over reliability & safety.
Model No : MV V12 O, 33kV: MV V36 O
Rated Voltage & Rated Current:12kV & 33kV, 630A Up to 2000A
Frequency : 50Hz
Short Time Withstand Current And Duration: 26.3kA/3Sec
Insulation Level: 11kV : 28kV / 75kV Peak, 33kV : 70kV / 170kV Peak
Closing / Tripping Coil Voltage: 24VDC to 220VDC
Spring Charge Mechanism: 230VAC
Breaker Standard: IEC 62271 100, IS13318
Degree of Protection: IP4X & 5X
Features
Applications
