Our Products
DESCRIPTION
VPL-WSNT-14 is a powerful set of IEEE802.15.4 nodes and sensor boards for medium size deployments. It will let the user implement complexnetworking configurations as well as acquiring datafrom state-of-the-art sensors. It also includes astandalone 802.15.4 Ethernet Bridge able to copewith a large number of nodes and to easilyconfigure the nodes and the network itself.
MAIN FEATURES:
The VPL-WSNT-14 is a powerful set of IEEE802.15.4 nodes and sensor boards for medium size deployments. It will let the user implement complexnetworking configurations as well as acquiring datafrom state-of-the-art sensors. It also includes astandalone 802.15.4 Ethernet Bridge able to copewith a large number of nodes and to easilyconfigure the nodes and the network itself.
This UPS Trainer provides complete set up for the practical and experimental knowledge of a general circuit of On-Line U.P.S. with fault creating facility. This is very helpful in understanding the working of UPS
UPS Trainer (VPL-UPST)
Features:
Note: Specifications of any product can be changed or added without notice in our constant efforts for improvement.
FEATURES
Zigbee Development Board is well suited for demonstration, evaluation and software development targeting IEEE 802.15.4 and Zigbee compliant application with CC2530. The user can develop the application using IAR Embedded Work Bench (support Zigbee Development) along with CC Debugger. This debugger is used for debugging and program download.
The coordinator (Transmitter) will transmit the data to the all end devices of different short address, MAC address without the routers.
Zigbee Development Board is easy to implement wireless solution. These solutions provide our customers a fast track to either incorporate wireless technology within their current products or to simply design a new product range with built in wireless technology. The coordinator (Transmitter) will transmit the data to the all end devices of different short address, MAC address without the routers.
This all can be done using the manager software, which is usedto detect different end devices of different short addresses. So justselect the end device node where user want to transmit data.
EXPERIMENTS
Package Contents
These modules can be connected to the I/O lines of any 8/16 bit Microprocessor Training Kit offered by us to perform experiments in the laboratory.
| |||||||||||||||||||||||||||||||||
|
SALIENT FEATURES:
SPECIFICATIONS:
Theory topics: Computer Networks
Theory topics: Network Topologies
Theory topics: Network Protocols
EXPERIMENTS:
This package is a set of learning based on TMS320F2812 DSP development platform, TMS320F2812 development kit to a development board for users to learn to use, as the system board can also be embedded into the users products for users of secondary development in order to shorten the product development cycle.
Specification
Package Contents
The system consists of a set of two tripods one for mounting the transmitting antenna and another for mounting the receiving antenna, 22 Antennas, RF Transmitter/ Receiver, Antenna Plotting Software and relevant accessories/ cables.
Accessories
FEATURES
VPL-VS-ATPC Based Manual Antenna Trainer has been designed to provide useful tools for hands on experimentation and teaching of various commonly used antennas in VHF-UHF Microwave band in the laboratory for students of all levels. It can be used in standalone mode as well as be interfaced with a computer via RS-232 interface. In this Receiving antenna is rotated manually from 0 to 360 degrees and accordingly receiving antennas signal strength can be monitored on the Receiver.
The complete array of the offered product Photo Electric Pickup (VPL-TT-PEPT) is prepared utilizing the optimum quality components and modern machines by the professionals who have years of experience in this domain. It is useful in study of measurement of photo electric pickup transducer.
This software tool from VPL Infotech & Consultants is a very useful utility which makes learning various difficult networking concepts easy. This helps in understanding what actually a term in networking means. With its graphic interface and easy to use features make it a must for network study.
Learn VHDL the Direct way with our low-cost, interactive VHDL simulator.DirectVHDLis built around a VHDL interpreter that allows you to edit and simulate your VHDL design without complicated setup or compilation procedures. DirectVHDL simply loads and simulates in one step.
DirectVHDL includes the following:
Requirements
Windows
Windows 95, 98, Me, NT 4.0, or 2000, 15 MB hard disk space, 64 MB RAM.
The Digital Trainer Kit (VPL-DICT-GF) has been designed with the idea of providing basic facilities essential for conducting simple experiments in the laboratory. Using these facilities one can get familiarised with the various digital ICs. The system is suitable for conducting experiments on TTL ICs. Eight numbers of logic switches are provided onboard for giving digital inputs in the circuit.
Technical Specifications:
ThisDigital Trainer Kit with Bread Board VPL-DL-DTKPhas been designed with the idea of providing basic facilities essential for conducting simple experiments in the laboratory. Using these facilities one can get familiarized with the various digital ICs.
ThisDigital Trainer Kit with Bread Boardhas been designed with the idea of providing basic facilities essential for conducting simple experiments in the laboratory. Using these facilities one can get familiarized with the various digital ICs. The system is suitable for conducting experiments on TTL ICs. The system has anonboard facility of four crystal generated clock output of 1MHz, 100Hz, 10Hz & 1Hz. It has a facility of Single Pulse Generation by push button switch. Four Seven Segment Display with BCD inputs having breadboard area facility of 1200 TIE points.
Salient Features:
Technical Specifications:
SALIENT FEATURES
LIST OF EXPERIMENTS
OPTIONAL ACCESSORIES
Multimedia interactive computer based training manual
SALIENT FEATURES
FM Demodulator :
LIST OF EXPERIMENTS
OPTIONAL ACCESSORIES
Multimedia interactive computer based training manual
SALIENT FEATURES
LIST OF EXPERIMENTS
OPTIONAL ACCESSORIES
Multimedia interactive computer based training manual
Features:
Frequency Shift Keying Modulation & Demodulation TrainerVPL-CT-ASKis widely demanded for perfect performance. This range is prepared in line with the set industry standards.
Technical Specifications:
Phase Shift Keying Modulation & Demodulation TrainerVPL-CT-PSKis very important trainer do demonstrate students the working of Phase Shift Keying Modulation & Demodulation. This range is prepared in line with the set industry standards.
echnical Specifications:
VPL-EPABX is a single board EPABX TRAINING KIT configured around the most popular microcontroller 89C51. VPLEPABX can be used to trained the Engineers about the architecture of EPABX.
This EPABX trainer have the provision to use 1, 2 or 3 trunk lines & 4, 6 or 8 extension lines respectively. Locking & other facilities are provided in this trainer same as normal EPABX. This trainer can perform the following functions such as use the password to protect the call Extension to Extension call, Hold, Call transfer, Call pick up, Call parking, Call forwarding, Redial, Call control, Conference, Do not disturb etc.
SPECIFICATIONS
LIST OF EXPERIMENTS
DescriptionThe VPL-GPS is a 12 channel continuous tracking GPS receiver optimized for high sensitivity and low cost applications. The GPS signal is applied to the antenna input of the module, and a complete serial data message with position, velocity and time information is presented at the serial interface.
The GPS10 contains a low noise amplifier for passive antenna operation, RF down converter, baseband processor, flash memory and navigation software. The module provides excellent navigation performance under static or dynamic conditions in areas with limited sky view like urban canyons, fast TTFF for weak signaloperation. Power saving mode make this product suitable for handheld and battery-operated devices.
Extremely fast TTFF at low signal level.
Built in high gain LNA.
SMD type with stamp holes.
RoHS compliant (Lead-free).
DescriptionVPL's Local Area Network (LAN) Trainer provides the understanding of all the fundamentals of networking. It helps the user to gain knowledge regarding all network layers, cable designing and building of complete network of computers. The user can understand and implement various topologies using different standards given by IEEE. Connections can be made in different topologies and data can be transferred. The user will understand the protocols, topologies used in networking, measurement of error rate, throughput and effect of errors on protocols. The versatile software provided with VPL-LAN will assist the user to observe the various effects and configurations on network along with the graphical representation.
FEATURES
TECHNICAL SPECIFICATIONS
Hardware:
Software:
Graphical Representation:
Network details:
Network & protocol analysis :
Experiments that can be performed
This set up is designed to study performance of analog PID controller with model process as temperature control system. The set up has built in signal source as reference, digital voltmeter as temperature indicator, PID controller with separate controls and a model process with built in regulated DC supply to operate the system.
The controller parameters are controlled by PID controls in which I control can be out of circuit by mean I ON control switch. The D control is made out by mean of keeping D control to minimum or fully counter clockwise direction. The set point temperature is adjusted by SET POINT control while the reference temperature is read by digital display keeping TEMP switch to set point direction. The heater may be cut-off regardless of any setting by mean of HEATER ON switch. A fan is included in the oven which is used to bring temperature below when the heater is off. The similar one is used to add disturbance when the set up is running under PID control mode.
TECHNICAL SPECIFICATIONS
Following experiments can be performed:
This set up is designed to study performance of analog PIDController with simulated process. The board has built in signalsource, building blocks for simulated process and PID Controllerwith built in regulated dc supply to operate the system.
The PID Controller has three adjustable parameters, as P, I, Deach has 10 turn potentiometers with dial knobs which aresubdivided for .02 resolution. Three sockets are provided to addor out any of desired control P, I or D. at input of PID controlleran adder is provided which sums the reference and feedbacksignals. The input and output of PID control has no phase shift.
The PID Controller has three adjustable parameters, as P, I, Deach has 10 turn potentiometers with dial knobs which aresubdivided for .02 resolution. Three sockets are provided to addor out any of desired control P, I or D. at input of PID controlleran adder is provided which sums the reference and feedbacksignals. The input and output of PID control has no phase shift.
A Synchro Transmitter Receiver (STR) Trainer is an electromagnetic transducer commonly used to convert an angular position of a shaft into an electric signal. It is usually called a synchro transmitter. Its construction is similar to that of a three phase alternator. It consists of Sator, Rotor, Synchro Transmitter and Synchro Receiver.
A Synchro Transmitter Receiver (STR) Trainer is an electromagnetic transducer commonly used to convert an angular position of a shaft into an electric signal. Its construction is similar to that of a three phase alternator. The stator (stationary member) is of laminated silicon steel and is slotted to accommodate a balanced three phase winding which is usually of concentric coil type (three identical coils are placed in the stator with their axis 120 degrees apart) and is Y connected. The rotor is a dumb bell construction and wound with a concentric coil. The system set up is made up of synchro transmitter and synchro receiver on a single rigid base provided with suitable switches and anodised angular plates. The system also contains a step down transformer for providing excitation to the rotors. Suitable test points for rotor (R1 and R2) and stator (S1, S2 and S3) for both Tx and Rx are provided.
VPL-DSP55XX Development Board is a fully functional learning and development platform based on TMS320VC55XX DSP. VPL-DSP55XX boards can be used both as a development board for users to learn, and as an embedded system board for the users secondary development of products in order to shorten the product development cycle. The market is by far the most cost-effective 5509 development board.
System Resources:
FEATURES:
PACKAGE CONTENTS
FEATURES:
PACKAGE CONTENTS
This trainerVPL-ET-VLSIis a Universal VLSI trainer for FPGA & CPLD having many features.
Features:
On-Board Interfaces:
Package Contents:
Daughter Boards Available for VPL-ET-VLSI (Optional)
This is the best quality CPLD Trainer Kit. The offered product is prepared in line with the set industry principles by the expert professionals. Furthermore, it can be availed from us at very low cost.
Features:
Package Contents:
We are a notable company for offering FPGA Trainer Kit to our most valued clients. The offered product is strictly checked on every stage while preparing in order to ensure the finest functionality. It is widely demanded in the market for perfect quality.
Features:
Package Contents:
Spartan 3S500E based FPGA Trainer Kit is a powerful digital system design platform built around a Xilinx Spartan 3S500E FPGA. TheVPL-Spartan3S500is ideally suited to embedded processors like Xilinx's 32-bit RISC processor. The on-board I/O devices like LCD, Keyboard, LEDs, Stepper Motor etc. allows user with a wide range of designs to be completed without the need of any additional components.
System Specification:
The DSP Eye Low Cost Image Developer Kit is a development board that enables evaluation of and design with the DM642 Digital Media Processor. It is designed to work with Texas Instruments Code Composer Studio software tools connected through a USB JTAG Emulator.
The main application areas:
Image Processing
Network Transmission
Video Conference
Image Control
Voice analysis
The TMS320C6713 DSP Starter Kit (VPL-DSK-6713) is a low-cost development platform designed to speed the development of high precision applications based on TIs TMS320C6000 floating point DSP generation. The kit uses USB communications for true plug-and-play functionality. Both experienced and novice designers can get started immediately with innovative product designs with the DSKs full featured Code Composer Studio IDE and eXpressDSP Software (optional) which includes DSP/BIOS and Reference Frameworks. All users will benefit from the eXpressDSP for Dummies textbook featured for the first time in this DSK.
Features:
The VPL-DSK-6713 includes
JTAG EMULATOR FEATURES:
This package is a set of learning based on TMS320VC5402PEG100 DSP development platform for users to learn to use and understand.
System Resource:
Contents:
Measurement System :
SPECIFICATIONS
The offered product Humidity Sensor Trainer (VPL-TT-HST) is prepared utilizing the optimum quality components and modern machines by the professionals who have years of experience in this domain. It is useful in study of Humidity Sensor transducer.
The complete array of the Photo Sensor Trainer, (VPL-TT-PST) is prepared utilizing the optimum quality components and modern machines by the professionals who have years of experience in this domain. It is helpful in study of working of Photo Sensor Transducer.
Our robust designed Etching MachineVPL-EM, owing to reliable performance, perfect design and smooth finishing, is highly acclaimed among our clients. This product is available with us at the most reasonable prices.
Specifications:
a) 200mm200mm (88) STANDARD
b) 300mm250mm (1210) on demand
We have brought these Programmable DC Power Supply models (30V 3A and 30V 5A). These have super Performance with Low noise, cooling fan controlled by Heat sink temperature, Compact sized, light weight, Constant voltage/constant current operation with Output ON/OFF Control and Software calibration
Programmable DC Power Supply:
Specifications |
Voltage Range : 0-30V |
Current Range : 0-3A ( Model: VPL-PDCPS-303) 0-5A (Model: VPL-PDCPS-305) |
Load Regulation |
Voltage : <0.01%+2mV |
Current : <0.1%+5mA (Model: VPL-PDCPS-303) <0.1%+10mA (Model: VPL-PDCPS-305) |
Line Regulation |
Voltage : <0.1%+3mV |
Current : <0.1%+3mA |
Setup Resolution |
Voltage : 10mV |
Current : 1mA |
Setup Accuracy (25°C ±5°C) |
Voltage : <0.5%+20mV |
Current : <0.5%+5mA |
Ripple (20 – 20M) |
Voltage : <1mVrms (Model: VPL-PDCPS-303) <2mVrms (Model: VPL-PDCPS-305) |
Current : <3mArms |
Temp. Coefficient |
Voltage : <150ppm |
Current : <150ppm |
Read Back Resolution |
Voltage : 10mV |
Current : 1mA |
Read Back Temp. Coefficient |
Voltage : <150 ppm |
Current : <150 ppm |
.to impart training and to understand hardware & software of PC - an easy teaching aid for man to machine communication. We are using personal computers PC/AT for various industrial and office purpose. Specially to impart training on various blocks of hardware and their co-relation with software, VPL-PCT is designed
APPLICATIONS
VPL-PCTcan be used both in PC Demonstrator as well as normalPC mode, with the help of switch provided on the front panel.
The Computer Application Trainer cum Demonstrator is having thefollowing features to study Hardware, Software and Debugging of:
LIST OF FAULTS CREATION & RECTIFICATION
Separate attachment is supplied to simulate faults at:
The offered USB Based Standalone Data Logger System is used to log different type of sensors input. It can be applied to small remote I/O system. With its user-friendly interface, users can quickly and easily build any control application without any programming skills. This data logger has 8 analog inputs, which can be used to sense temperature/humidity analog values. Each sensor has its own corresponding relay. These relays will get ON/OFF depending upon the lower limit and higher limit of each sensor set by user.