Post Buy Requirement
WL
Mumbai, Maharashtra, India
Add Review

Other Products / Services #414245

Dry Bath With Flowmeter

We are offering dry bath with flowmeter.As per is:335, astm d2440 test method.1224 place aluminum alloy dry bath.super engineered & designed having required holes (1224) well machined to accept oxidation tubes.microprocessor based pid temperature controller with pre-setting digital timer.flow meters with needle valve to regulate air flow at 1 lph, 0.1 lph.temperature range for 50c to 200c, 0.5c.power supply : 230 10% volt ac, 1 phase, 50 hz.
View Complete Details

Viscosity Bath

We offer viscosity bath. Double walled construction with inner cylindrical dewar flask and outer metal casing with toughened glass window provided on the front side. Low wattage fluorescent lamp at the rear illuminates the dewar flask. Bakelite cover plate with openings for 2 viscometers. A well balance cfc-free single cascade refrigeration system with eco-friendly refrigerant. Motorized stirrer provides adequate liquid transfer, both vertical and horizontally. Fully automatic microprocessor based pid controller having feather touch key board with pt-100 sensor. Liquid capacity 12 litres. Efficient stirring system.
View Complete Details

Tergotometer

For laboratory evaluation of soaps, detergents, dyestuffs, surfactants, cleaners for textiles and other materials.Rectangular constant temperature bath with inner working chamber made of stainless steelThermal insulation lagged in between the walls to prevent temperature loss.The bath is provided with a lid with six ports.Temperature controlled by fully automatic digital controller with PT-100 sensor.Stirring spindle assembly is driven by a heavy duty DC motor with gear box.Variable speed regulator and digital speed indicator incorporated.The drive assembly is mounted on a rigid stand just above the water bath.Temperature range : Above ambient to 50C, 0.5C.Speed : 50 to 150 rpm, 1 rpm.Power supply : 230 V, 50 Hz, 1 Phase.
View Complete Details

Laboratory Oven

Ideal for wide range of incubating, tempering, thermal storage and drying application.Triple walled Construction with regular and GMP models.Thermal insulation lagged in-between the walls to prevent loss of temperature.Ventilator is provided on top & side for exhaust.The door will be of flush type and will be provided with positive locking arrangement.Heavy duty capacitor run motor with blower circulation provided from the side of the oven for air circulation inside the chamber.The heating elements are fitted on the two sides of the oven to facilitate uniform dissipation of heat all over the chamber.Microprocessor based PID temperature controller with PT-100 sensor.Working size : 45 x 45 x 45 cms, 60 x 60 x 60 cms & 60 x 60 x 90 cms
View Complete Details

Cloth Soiling Machine

Rectangular solvent water bath made of 16 swg, 304 aisi stainless steel.geared motor drives metal rollers with neoprene moulding mounted in vertical position.power supply : 230 v, 1 phase, 50 hz.
View Complete Details

Salt Spray Test Chamber

Cabinet constructed from non-corrodible high temperature resistant glass reinforced plastic. Acrylic cover is provided.Constructed in fiber-reinforced plastic, 10 mm thick with stiffners at the bottom to take heavy load.The FOG Chamber conforms to ASTM B 117 specification. The volume is of sufficient size to test adequately the desired number of parts without overcrowding.The apparatus consists of a fog chamber, a salt solution reservoir, a supply of moisture free compressed air, atomizing nozzles, specimen supports, provision for heating the chamber, humidifying chamber and control system.The fog chamber is provided with digital temperature controller, pressure gauge, provision for controlling the mist, humidity indicator and solenoid valve to regulate these conditions.Capacity : 100, 200, 400 and 600 Litres.
View Complete Details

Moisture Oven Cor Coal

This test method is based on the loss in weight of a coal sample in an air atmosphere under rigidly controlled conditions of temperature, time, and airflow.a provision for renewing the preheated air in the oven at the rate of one to four times a minute, with the dry air.an exhaust change-over valve allows the output flow meter to be by-passed during operation, preventing the build of condensation in the flow meter.temperature range : above ambient to 150c 2c.timer provided to set the operation time.230 v, 50 hz. Power supply.
View Complete Details

Minimum Space Oven For Coal

For the determination of moisture in coal and coke by drying in an atmospheric nitrogen atmosphere as described inbs 1016 astm d 3302.a provision for renewing the preheated air in the oven at the rate of one to four times a minute, with the dry air.an exhaust change-over valve allows the output flow meter to be by-passed during operation, preventing the build of condensation in the flow meter.temperature range : above ambient to 150c 2c.digital timer provided to set the operation time.230 v, 50 hz. Power supply
View Complete Details

Cryostat

Application ranges, research and development laboratories of industry, medicine and biotechnology, incubation of valuable biological products, calibration tests and external circulation.The main reservoir is made of thick gauge S.S. with drain.The bath is having drop-in lid with handle.'PUF' insulation lagged in between the walls to prevent temperature loss.A well balanced CFC-free refrigeration system with eco-friendly refrigerant.Stainless steel water immersion heaters.Thermo stirrer with centrifugal pump driven by heavy-duty capacitor run AC motor helps maintain uniform temperature across the bath media.Can be used for external tempering.
View Complete Details

Oxidation Stability Dry Bath

Oxidation stability is determined by exposing the sample to a measured oxygen flow at elevated temperature in the presence of metal catalysts. Complete with solid aluminum block for 1224 samples. as per iec:61125, annexure c, method c.1224 place aluminum alloy dry bath.super engineered & designed having required holes (1224) well machined to accept oxidation tubes.microprocessor based pid temperature controller with pre-setting digital timer.
View Complete Details

Pharma Refrigerators

Pharma Refrigerators are especially built to pass FDA and ICH compliance standards and have a reputation for reliability, quality and performance. Construction as per cGMP regulations.Consisting of refrigeration, air handling, humidification, dehumidification, temperaturehumidity controllingMicroprocessor based PID Temperature controller ORPLC based system for chamber control and auto changeover of standby system with touch screen display.Printer interface & PC interface for data storageStandard networking via Ethernet.
View Complete Details

Photostability Chamber

Wadegati offers a wide range of stability testing chambers that satisfy ICH Q1B guidelines. A state of the art Photostability chambers are available. This chamber has the capability to provide fluorescent light intensities from 1, 000 to 10, 000 Lux hour. Samples stored at 10, 000 Lux can satisfy the ICH guidelines for light exposure in as little as five days. The UV study is done simultaneously. Separate switches are provided for incandescent & UV light sources.
View Complete Details

Cyclic Temperature Chamber

For climatic and durability test of electrical and electronic components, simulated tropical and extreme tropical conditions, testing of drugs, chemicals, medicines, reliability evaluation of electronic components, accelerated life testing and thermal shock testing for infant mortality of components.Double walled construction with regular and gmp models.100mm thick 'puf' insulation lagged in-between the walls to prevent loss of conditions.A well balanced cfc-free cascade refrigeration system with eco friendly refrigerant.
View Complete Details

Stability Chambers

Stability test chambers are especially built to pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA ICH guidelines for long term, Intermediate and Accelerated Stability studies. Construction as per cGMP regulations.Consisting of refrigeration, air handling, humidification, dehumidification, temperaturehumidity controllingMicroprocessor based 2 channel multifunctional PID Temperature Humidity ( RH) controller for simultaneous control of temperature and % RH. OR PLC based system for chamber control and auto changeover of standby system
View Complete Details

Corrosive Sulphur Oven

We are offering corrosive sulphur oven.Triple walled construction.cross flow air circulation.microprocessor based pid temperature controller with pre-setting digital timer.safety thermostat.temperature upto 200c, 1c.working size : 45w x 45d x 45h cms. power supply : 230 10% volt ac, 1 phase, 50 hz.
View Complete Details

Ageing Oven

As per IS:12177-1987, Method A.Oxidative ageing test by open beaker method.Microprocessor based PID temperature controller with pre-setting digital timer.Rotating shelves driven by high torque geared motor with fixed speed 2 rpm.Front door opening with toughened glass viewing window.Air flow rate in the oven is maintained by forced air circulation which gives 8-20 changes per hour.To accommodate 8 samples of 400ml glass beaker.Temperature range : Ambient to 150C, 2C.Power supply : 230 10% Volt AC, 1 Phase, 50 Hz.
View Complete Details

Gassing Tendency Apparatus

We are offering gassing tendency apparatus.This international standard measures the tendency of insulating liquids to evolve or absorb gas when subjected in cells having specific geometrics, electrical stress of sufficient intensity to cause an electric discharge through a gas phase in which a gas oil interface is located.Gassing cell and gas burette assembly made of borosilicate glass with a relative permittivity of 5 0.2 at 80c.Hollow high-voltage electrode-made of centre less-ground and polished stainless steel with stainless steel capillary tubing as a gas passage. The electrode is supported by teflon plug.Heating device-constant temperature transparent oil bath with a circulatory, heating and digital control system.Transparent safety shield-made of clear view acrylic sheet.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Ceo (Wadegati Labequip Pvt. Limited)
  • B - 126 / 127, Ansa Industrial Area, Estate, Saki Vihar Road, Sakinaka, Mumbai, Maharashtra - 400072
  • Share us via
List of Other Products by Wadegati Labequip Pvt. Limited from Mumbai, Maharashtra.
Post Buy Requirement
WL
Mumbai, Maharashtra, India
Add Review

Other Products / Services #414245

Dry Bath With Flowmeter

We are offering dry bath with flowmeter.As per is:335, astm d2440 test method.1224 place aluminum alloy dry bath.super engineered & designed having required holes (1224) well machined to accept oxidation tubes.microprocessor based pid temperature controller with pre-setting digital timer.flow meters with needle valve to regulate air flow at 1 lph, 0.1 lph.temperature range for 50c to 200c, 0.5c.power supply : 230 10% volt ac, 1 phase, 50 hz.
View Complete Details

Viscosity Bath

We offer viscosity bath. Double walled construction with inner cylindrical dewar flask and outer metal casing with toughened glass window provided on the front side. Low wattage fluorescent lamp at the rear illuminates the dewar flask. Bakelite cover plate with openings for 2 viscometers. A well balance cfc-free single cascade refrigeration system with eco-friendly refrigerant. Motorized stirrer provides adequate liquid transfer, both vertical and horizontally. Fully automatic microprocessor based pid controller having feather touch key board with pt-100 sensor. Liquid capacity 12 litres. Efficient stirring system.
View Complete Details

Tergotometer

For laboratory evaluation of soaps, detergents, dyestuffs, surfactants, cleaners for textiles and other materials.Rectangular constant temperature bath with inner working chamber made of stainless steelThermal insulation lagged in between the walls to prevent temperature loss.The bath is provided with a lid with six ports.Temperature controlled by fully automatic digital controller with PT-100 sensor.Stirring spindle assembly is driven by a heavy duty DC motor with gear box.Variable speed regulator and digital speed indicator incorporated.The drive assembly is mounted on a rigid stand just above the water bath.Temperature range : Above ambient to 50C, 0.5C.Speed : 50 to 150 rpm, 1 rpm.Power supply : 230 V, 50 Hz, 1 Phase.
View Complete Details

Laboratory Oven

Ideal for wide range of incubating, tempering, thermal storage and drying application.Triple walled Construction with regular and GMP models.Thermal insulation lagged in-between the walls to prevent loss of temperature.Ventilator is provided on top & side for exhaust.The door will be of flush type and will be provided with positive locking arrangement.Heavy duty capacitor run motor with blower circulation provided from the side of the oven for air circulation inside the chamber.The heating elements are fitted on the two sides of the oven to facilitate uniform dissipation of heat all over the chamber.Microprocessor based PID temperature controller with PT-100 sensor.Working size : 45 x 45 x 45 cms, 60 x 60 x 60 cms & 60 x 60 x 90 cms
View Complete Details

Cloth Soiling Machine

Rectangular solvent water bath made of 16 swg, 304 aisi stainless steel.geared motor drives metal rollers with neoprene moulding mounted in vertical position.power supply : 230 v, 1 phase, 50 hz.
View Complete Details

Salt Spray Test Chamber

Cabinet constructed from non-corrodible high temperature resistant glass reinforced plastic. Acrylic cover is provided.Constructed in fiber-reinforced plastic, 10 mm thick with stiffners at the bottom to take heavy load.The FOG Chamber conforms to ASTM B 117 specification. The volume is of sufficient size to test adequately the desired number of parts without overcrowding.The apparatus consists of a fog chamber, a salt solution reservoir, a supply of moisture free compressed air, atomizing nozzles, specimen supports, provision for heating the chamber, humidifying chamber and control system.The fog chamber is provided with digital temperature controller, pressure gauge, provision for controlling the mist, humidity indicator and solenoid valve to regulate these conditions.Capacity : 100, 200, 400 and 600 Litres.
View Complete Details

Moisture Oven Cor Coal

This test method is based on the loss in weight of a coal sample in an air atmosphere under rigidly controlled conditions of temperature, time, and airflow.a provision for renewing the preheated air in the oven at the rate of one to four times a minute, with the dry air.an exhaust change-over valve allows the output flow meter to be by-passed during operation, preventing the build of condensation in the flow meter.temperature range : above ambient to 150c 2c.timer provided to set the operation time.230 v, 50 hz. Power supply.
View Complete Details

Minimum Space Oven For Coal

For the determination of moisture in coal and coke by drying in an atmospheric nitrogen atmosphere as described inbs 1016 astm d 3302.a provision for renewing the preheated air in the oven at the rate of one to four times a minute, with the dry air.an exhaust change-over valve allows the output flow meter to be by-passed during operation, preventing the build of condensation in the flow meter.temperature range : above ambient to 150c 2c.digital timer provided to set the operation time.230 v, 50 hz. Power supply
View Complete Details

Cryostat

Application ranges, research and development laboratories of industry, medicine and biotechnology, incubation of valuable biological products, calibration tests and external circulation.The main reservoir is made of thick gauge S.S. with drain.The bath is having drop-in lid with handle.'PUF' insulation lagged in between the walls to prevent temperature loss.A well balanced CFC-free refrigeration system with eco-friendly refrigerant.Stainless steel water immersion heaters.Thermo stirrer with centrifugal pump driven by heavy-duty capacitor run AC motor helps maintain uniform temperature across the bath media.Can be used for external tempering.
View Complete Details

Oxidation Stability Dry Bath

Oxidation stability is determined by exposing the sample to a measured oxygen flow at elevated temperature in the presence of metal catalysts. Complete with solid aluminum block for 1224 samples. as per iec:61125, annexure c, method c.1224 place aluminum alloy dry bath.super engineered & designed having required holes (1224) well machined to accept oxidation tubes.microprocessor based pid temperature controller with pre-setting digital timer.
View Complete Details

Pharma Refrigerators

Pharma Refrigerators are especially built to pass FDA and ICH compliance standards and have a reputation for reliability, quality and performance. Construction as per cGMP regulations.Consisting of refrigeration, air handling, humidification, dehumidification, temperaturehumidity controllingMicroprocessor based PID Temperature controller ORPLC based system for chamber control and auto changeover of standby system with touch screen display.Printer interface & PC interface for data storageStandard networking via Ethernet.
View Complete Details

Photostability Chamber

Wadegati offers a wide range of stability testing chambers that satisfy ICH Q1B guidelines. A state of the art Photostability chambers are available. This chamber has the capability to provide fluorescent light intensities from 1, 000 to 10, 000 Lux hour. Samples stored at 10, 000 Lux can satisfy the ICH guidelines for light exposure in as little as five days. The UV study is done simultaneously. Separate switches are provided for incandescent & UV light sources.
View Complete Details

Cyclic Temperature Chamber

For climatic and durability test of electrical and electronic components, simulated tropical and extreme tropical conditions, testing of drugs, chemicals, medicines, reliability evaluation of electronic components, accelerated life testing and thermal shock testing for infant mortality of components.Double walled construction with regular and gmp models.100mm thick 'puf' insulation lagged in-between the walls to prevent loss of conditions.A well balanced cfc-free cascade refrigeration system with eco friendly refrigerant.
View Complete Details

Stability Chambers

Stability test chambers are especially built to pass FDA and ICH Q1A compliance standards and have a reputation for reliability, quality and performance. Exceed FDA ICH guidelines for long term, Intermediate and Accelerated Stability studies. Construction as per cGMP regulations.Consisting of refrigeration, air handling, humidification, dehumidification, temperaturehumidity controllingMicroprocessor based 2 channel multifunctional PID Temperature Humidity ( RH) controller for simultaneous control of temperature and % RH. OR PLC based system for chamber control and auto changeover of standby system
View Complete Details

Corrosive Sulphur Oven

We are offering corrosive sulphur oven.Triple walled construction.cross flow air circulation.microprocessor based pid temperature controller with pre-setting digital timer.safety thermostat.temperature upto 200c, 1c.working size : 45w x 45d x 45h cms. power supply : 230 10% volt ac, 1 phase, 50 hz.
View Complete Details

Ageing Oven

As per IS:12177-1987, Method A.Oxidative ageing test by open beaker method.Microprocessor based PID temperature controller with pre-setting digital timer.Rotating shelves driven by high torque geared motor with fixed speed 2 rpm.Front door opening with toughened glass viewing window.Air flow rate in the oven is maintained by forced air circulation which gives 8-20 changes per hour.To accommodate 8 samples of 400ml glass beaker.Temperature range : Ambient to 150C, 2C.Power supply : 230 10% Volt AC, 1 Phase, 50 Hz.
View Complete Details

Gassing Tendency Apparatus

We are offering gassing tendency apparatus.This international standard measures the tendency of insulating liquids to evolve or absorb gas when subjected in cells having specific geometrics, electrical stress of sufficient intensity to cause an electric discharge through a gas phase in which a gas oil interface is located.Gassing cell and gas burette assembly made of borosilicate glass with a relative permittivity of 5 0.2 at 80c.Hollow high-voltage electrode-made of centre less-ground and polished stainless steel with stainless steel capillary tubing as a gas passage. The electrode is supported by teflon plug.Heating device-constant temperature transparent oil bath with a circulatory, heating and digital control system.Transparent safety shield-made of clear view acrylic sheet.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us