Our Products #4494566

This small day night switch can switch on any Electrical device automatically when Dark falls and switch off in the morning automatically. A daynight switches outdoor lighting on and off automatically. It consists of a light-sensitive element that registers the brilliance of the ambient light. A switch is activated when the daylight reaches the pre-set level. Brief changes in light caused by clouds, car lights, lightning etc. will not activate the switch. Just install this smart LDR - Dusk to Dawn sensor Twilight switch at your home, office, Warehouse, Factory or Farm and watch your electricity bills cut down. Applications: Security Lights, Street Lights, Glow sign boards, Hoardings or any electrical device , Parking lot lighting, Shops, garden lighting, passage lighting and doorway lighting etc.and other places for automatic lighting. Shipping Information : 1. The product will be dispatched as soon as possible after the realization of the payment. 2. Item will not be shipped without a valid phone number. 3. Docket number will be informed to buyer once the product gets dispatched. Warranty Condition : Use this product only as intended (as described in the user instructions). Changes or modifications to the product or painting it will result in loss of warranty. You should check the device for damage immediately after unpacking it. If there is any damage, you should not install the device under any circumstances. If you suspect that safe operation of the device cannot be guaranteed, you should turn the device off immediately and make sure that it cannot be operated unintentionally.

Walnut Light Sensitive Switch Walnut Light Sensitive Switch can switch ON any Electrical device automatically when Dark falls and switch OFF in the morning automatically. Special features: Easy Connection with just two wires. Automatic switching on and off operation. Input power: AC Mains 220V Single phase 50 Hz. Output: AC 220V Single phase 50 Hz 4 Amp Max. Compact & Durable Design Walnut Day night switch Saves energy saves electricity , no need to manually switching on and off the light, easy to install and durable. Just install this smart LDR - Dusk to Dawn sensor Twilight switch at your home, office, Warehouse, Factory or Farm and watch your electricity bills cut down. Applications: This Day Night Switch Can use for Security Lights, Street Lights, Glow sign boards.Hoardings or any electrical device , Parking lot lighting, Shops, garden lighting, passage lighting and doorway lighting etc.and other places for automatic lighting.

The product adopts good sensitivity detector, integrated circuit. It gathers automatism, convenient safe, saving-energy and practical functions. It utilizes the infrared energy from human as control-signal source, it can start the load at once when one enters detection field. It can identify day and night automatically. It is easy to install and used widely. Specification: Detection Range:360degree 2.Rated Load:max.1200W 3.Detection Distance: max.6m 4.Time Delay:10sec to 7min(adjustable) Function Identify day and night automatically. Can adjust ambient light according to your desire: when turn to SUN (max), it will work in the daytime and at night. When turn to MOON (min), it will only work under less than 3LUX circumstance. As for Adjustment, please refer to testing way. Time-delay is added continually: when it receives the second induction signal after the first inductor, it will compute time once more on the rest of the first time-delay basic (Set time) . Time-delay adjustment: it can be set according to your desire. The minimum is 103 sec; the maximum is 72min. Installation: Turn off the power. Moving the transparent vinyl cover what is in the bottom of the sensor. Loosing the screws in the connection terminal, connecting the power and rated load to connection terminal of sensor according to connection sketch map. Tighten the screws; put the transparent vinyl cover into the original station.

The microwave sensors is working according to the microwave Doppler effect , it can be widely used in as automatic control switch, the security system, and Automatic video control system of ATM, as well as other automatic induction control area.

The Detection way has the below advantages compared with other as follows:

1. Non-contact Detection,

2. Suitable for bad environment, immune to temperature, humidity, noise, air, dust, Light

3. RF interference ability,

4. Transmission power only 0.2 mW, It will not harm the human Body. Simple installation+ easy wiring.

We use appropriate micro processing integrator, not Only for high sensitivity and wide range of detection, and on very reliable work, error rate is Extremely low, It can stable working on the temperature range: 15 + 70 Celsius degrees.

(adjustable)Time setting 8sec to 12min

,

(adjustable)Light control22000LUX,

(adjustable)Power consumption:approx.0.5W

Important: persons or objects moving towards the sensor are detected best!

NOTE: the high-frequency output of this sensor is

Walnut innovations fire smoke sensor detection alert alarm system photoelectric smoke detector , properly installed and maintained. Residential smoke alarms, are one of the best and least expensive ways to provide an early warning when a fire begins. Smoke alarms save lives, prevent injuries and minimize property damage by alerting resident early to a fire hazard. Features: *sound & flash alarm, loud 85db alarm signal *dc 9v battery operated smoke detector *photoelectric sensor, detecting from all directions *low battery waring *test button for easy recommended monthly testing *ceiling or wall mounting *suitable for any rooms *flash alarm indicator (red led) *item size: 11 cm x 2.5 cm

Real Time Switch is a Real time timer which can be used to switch ON or OFF various Electrical appliances at pre-specified times. , Widely used for intelligent control of lighting equipment, Street Lamps, Garden Lights decorative lighting, hoarding lighting, glow sign boards and outdoor lighting, Neon signs, Household Electrical Appliances etc. As per time of the day. Ideal for household use in DB Boards Settings gets saved even during POWER FAILURES and takes effect once POWER is available. 600 Watt 7 Amps 240 V AC 24 hours 7 days a week programmable Built-in battery for backup the memory when power failure Auto time error correction +- 30 sec, weekly Repeat programs with 16 onoff settings, and setting onoff manually Technical Data: Temp.range: -20C+50C Input:220240V, 5060Hz CURRENT CONSUMPTION WITHOUT LOAD : 0.015MA Color: White Item size:107*60*75mm Net weight:116gDisplay: LCD Switching contact: 1 changeover switch Programs:16 onoff each day or week Hysteresis 2 secday (25C) Mini interval: 1min Timer range: 1min168hr Recharge battery: 1.2V 40Ma Average error: 1s24h, 25C Weight:200 gm Packet content:1 x Digital Timer , 1 x User manual

Walnut Innovations water level controller is an electronic product which controls the water pump automatically. Automatic water level controller switches ON the motor when the water level in the overhead tank drops below.Working : Automatic water level controller switch ON the motor when the water level in the overhead tank drops below pre fixed low level (on point, usually 12 tank) and SWITCH OFF the motor when water level rises up to pre fixed high level (off point) motor also switches off when the sump water is at below FOOTVALVE level. Automatic water level controller allows you to decide the water storage levels for operations of the pump in the overhead tank and the sump. Automatic Water level controllers are highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc. Features : Made from ABS plastic body, high grade PCB, for durability and performance, Input voltage is 230 V AC 415 VOverhead tank will have three sensors and ground level tank will have three sensors.No more Overflow thus saving water, electricity & manpower.Specially designed sensors that are plastic molded, corrosion resistant, non-conductive, low power, maintenance-free and safe for sensing levels in the tanks.System has three position power control toggle switch with "auto" mode, "off" mode and "manual" mode.In "manual" mode, pumpset can be controlled directly & level controller gets completely shut down & bypassed.Provide LED indication for Motor ON and OFF, water LOW and NORMAL.

Occupancy(PIR) Sensor offers security and convenience in the areas that they cover. Occupancy sensor is an intelligent device which detects IR Rays emitted by Human Being and controls the ON-OFF operation of electrical loads. Electrical Loads can be Lights, Fans, AC for Energy Saving Application or Siren, Buzzer, Feedback to Home Automation Controller along with Lights for Security Application. This highly sensitive Sensor Element detects human movement within its detection area and automatically turns the load ON. The Loads are kept ON till the Human Movement persists in the room. The Loads are turned OFF after preset time delay if no movement is detected within the set time It has an additional in built photo sensor (dusk to dawn sensor) which can set the sensor to turn ON artificial light only when the ambient light condition (LUX Level) drops below the set value. This reduces the large amount of energy wastage and helps in making the most energy efficient system along with security. TECHNICAL DETAILS : Operating voltage: AC 110-250V 50Hz-60HzOperating temperature: -20C+50CMax. Load : 1000W normal Incandescent typeDetecting distance: 07M (Related to the installation)Detecting angle: 360(Related to the installation)Time delay: 10 seconds to 7 minutes - AdjustableLight Sensitivity : DayNight sensor - AdjustableDimensions: 115mm Dia & 55mm Height

Walnut Innovations PIR Motion sensor Switch This PIR Motion Sensor is a new type of Energy-Saving light control switch. It works by detecting heat rays emitted by the human body. Auto switching of lights or other fixtures based on human occupancy in residential and commercial buildings. Security systems for triggering of Buzzers or switching on CameraDVR when human motion is detected. TECHNICAL DETAILS : Operating voltage: AC 220-250V 50Hz-60Hz Operating temperature: -20C+50C PRODUCT INSTALLATION : 1. In order to achieve effective Sensing distance, please keep the switch 1.5 meters high from the ground. 2. The light, such as incandescent lamp which emits high heat should be kept from the switch, at least one meter 3.During installation first time, the switch' initialization will take 30-50 sec. It's natural for the switch to turn onoff voluntarily. 4. When you install the switch on daytime, adjusted to SUN (max), it will work day and night, & when adjusted to MOON (min) it will be work only in the ambient light less than 3LUX means work only in night time or in dark .

This PIR Motion Sensor is a new type of Energy-Saving light control switch. It works by detecting heat rays emitted by the human body.Auto switching of lights or other fixtures based on human occupancy in residential and commercial buildings.Security systems for triggering of Buzzers or switching on CameraDVR when human motion is detected. TECHNICAL DETAILS : Operating voltage: AC 110-250V 50Hz-60HzOperating temperature: -20C+50CMax. Load : 1000W normal Incandescent typeDetecting distance: 07M (Related to the installation)Detecting angle: 360(Related to the installation)Time delay: 10 seconds to 7 minutes - AdjustableLight Sensitivity : DayNight sensor - AdjustableDimensions: 115mm Dia & 55mm Height

Walnut Light Sensitive Switch can switch ON any Lighting device automatically when Dark falls and switch OFF in the morning automatically. Special features: Easy Connection Automatic switching on and off operation. Input power: AC Mains 220V Single phase 50 Hz. Output: AC 220V Single phase 50 Hz 4 Amp Max. Compact & Durable Design Walnut Day night switch Saves energy saves electricity , no need to manually switching on and off the light, easy to install and durable. Just install this smart LDR - Dusk to Dawn sensor Twilight switch for Street Lights, home, office, Warehouse, Factory or Farm and watch your electricity bills cut down. Applications: This Day Night Switch Can use for Security Lights, Street Lights, Glow sign boards.Hoardings or any electrical device , Parking lot lighting, Shops, garden lighting, passage lighting and doorway lighting etc.and other places for automatic lighting.

Remote control via your mobile phone, Work anywhere in the world where there is GSM cell phone network. This GSM Switch allows switching almost any Industrial or household appliances On or OFF remotely via mobile network. Simply call a number and if the number calling 'Caller ID' is known, then one of the on-board relays is switched to control connected equipment such as lights, gates, doors, heating and more. User can Control & Monitor Machinery Automobiles Irrigation pump sets lights Heating Security systems Tank level Remote servers & routers, Industrial, Home & Office appliances by any Mobile or Land line phone from anywhere in the world. Technical Specifications :- Micro controller Based Multifunction programmable SMS & DTMF Based functioning (call based) Programmable relay latching Optically Isolated 5 Relay output C NC Operating temperature -20C to 60C Weight 400gm

The GSMGPRS Modem USB uses SIM800 based Quad band 85090018001900MHz GSM GPRS module. It can be connected to PC or laptop via USB directly or to a microcontroller UART using TTL levels. The modem consists of all the external circuit required to start experimenting with the SIM900A module like the power regulation, external antenna, SIM Holder, etc. Modem is built with Quad Band GSMGPRS based SIM900A module from SIMCOM. It works on frequencies 85090018001900MHz. SIM900A can search these bands automatically. The frequency bands can also be set by AT Commands. The baud rate is configurable from 1200-115200 through AT command. The GSMGPRS Modem is having internal TCPIP stack to enable you to connect with internet via GPRS. Best suited for GSM based Microcontroller Projects (better than SIM300 and other GSM Modems) **** Can be Use for Bulk SMS sending using Compatible software. Features: Uses the extremely popular SIM800 GSM module. Accepts commands through On board USB serial. Also can accept commands from microcontroller UART. Provides serial TTL interface for easy and direct interface to microcontrollers. Works on 9V-18V 1 A SMPS supply. Speaker and Microphone pins onboard for voice Communication. On board SMA connector with GSM antenna. On board Power, Network, Ring and status LEDs for indication. Can do basic functions which can be done via normal phone like calling, send sms, access data through GPRS etc. Plug and play device. Can accept commands through Hyper Terminal. Ft232 R Based USB communication- Better and Faster than other Cheap USB Drivers. Supports Windows 8.1 8 7 Vista Server 2003 XP 2000 98SE MaC OS X Mac OS 9 , Linux 3.x.x 2.x.x. Small size.

Walnut Innovations Water level Controller is an electronic product which controls the water pump automatically. Automatic water level controller switches ON the motor when the water level in the overhead tank drops below.Working : Automatic water level controller switch ON the motor when the water level in the overhead tank drops below pre fixed low level (on point, usually 12 tank) and SWITCH OFF the motor when water level rises up to pre fixed high level (off point) motor also switches off when the sump water is at below FOOTVALVE level. Automatic water level controller allows you to decide the water storage levels for operations of the pump in the overhead tank and the sump. Automatic Water level controllers are highly recommended for metro cities or areas where drinking water is supplied through pipelines which are further distributed in homes, hotels, societies etc. Features : Made from ABS plastic body, high grade PCB, for durability and performance, Input voltage is 230 V AC 415 VOverhead tank will have three sensors and ground level tank will have three sensors.No more Overflow thus saving water, electricity & manpower.Specially designed sensors that are plastic molded, corrosion resistant, non-conductive, low power, maintenance-free and safe for sensing levels in the tanks.System has three position power control toggle switch with "auto" mode, "off" mode and "manual" mode.In "manual" mode, pumpset can be controlled directly & level controller gets completely shut down & bypassed.Provide LED indication for Motor ON and OFF, water LOW and NORMAL.