• FlavourMethi
• Minimum Order Quantity100 Packet
• Packaging TypePacket
•   

Hold-Down springs housed in each guide block pre-load the assembly to provide the clamp action on the material being sheared. Lift off screws, are set at the works to ensure a maximum gap of 6-7 mm. between the table & hold-down griping pads, when the notcher beam is raised. The hold-down is raised and the clamp is released automatically as the notcher beam near the top of stroke. This is accomplished through the action of stops on notching beam. During the downward strokes the arrangements is such that clamp; pressure is applied to the material before notching commences.

The Drive & Method of rolls adjustment of GODSON section bending machine give them a unique & universal rang of capacities with pre bending of both the leading and trailing edges without the need to remove and turn the section being bent and with a minimum of losses in material. All operations are carried out by Potable push button type movable control desk. Machine is available in two different versions i.e. suitable to bend heavy duty sections, lower rolls adjustment are through hydraulic power pack unit & individual hydraulic cylinders.

Section bending machines are designed & built according to the latest technology. The Material & components used are thoroughly tested in all practical bending situations and with the GODSON section bending machine the bending machine the bending operation can be carried out with a minimum of manual efforts.

First time in India , our machine are fitted with Electric Brake Motor and Control Panel, so that Machine can be stopped at any stage of operations, hence the shape in rolling as per requirement is most possible and due to the movable control panel you can operate Machine very easily.Only Top Roll Pressing (Up-Down) and opening-closing of drop-end are through hydraulic System & cylinders all other operations are carried out mechanically in hydro-mechanical version Top Roll Pressing is manually and opening closing of end-dropper is manual or motorized.

We manu. single mari papad, double mari papad, rajwadi papad, mung dal palad, palin khakhra, jeera khakhra, maithi khakhra & masala khakhra

• FlavourMethi
• Minimum Order Quantity100 Packet
• Packaging TypePacket
•   

Hold-Down springs housed in each guide block pre-load the assembly to provide the clamp action on the material being sheared. Lift off screws, are set at the works to ensure a maximum gap of 6-7 mm. between the table & hold-down griping pads, when the notcher beam is raised. The hold-down is raised and the clamp is released automatically as the notcher beam near the top of stroke. This is accomplished through the action of stops on notching beam. During the downward strokes the arrangements is such that clamp; pressure is applied to the material before notching commences.

The Drive & Method of rolls adjustment of GODSON section bending machine give them a unique & universal rang of capacities with pre bending of both the leading and trailing edges without the need to remove and turn the section being bent and with a minimum of losses in material. All operations are carried out by Potable push button type movable control desk. Machine is available in two different versions i.e. suitable to bend heavy duty sections, lower rolls adjustment are through hydraulic power pack unit & individual hydraulic cylinders.

Section bending machines are designed & built according to the latest technology. The Material & components used are thoroughly tested in all practical bending situations and with the GODSON section bending machine the bending machine the bending operation can be carried out with a minimum of manual efforts.

First time in India , our machine are fitted with Electric Brake Motor and Control Panel, so that Machine can be stopped at any stage of operations, hence the shape in rolling as per requirement is most possible and due to the movable control panel you can operate Machine very easily.Only Top Roll Pressing (Up-Down) and opening-closing of drop-end are through hydraulic System & cylinders all other operations are carried out mechanically in hydro-mechanical version Top Roll Pressing is manually and opening closing of end-dropper is manual or motorized.

We manu. single mari papad, double mari papad, rajwadi papad, mung dal palad, palin khakhra, jeera khakhra, maithi khakhra & masala khakhra