Product / Services
Post Buy Requirement
WA
Wetpoint Aqua Equipments Private Limited
Gwalior, Madhya Pradesh, India
Add Review
Call Now

Our Products

  1. Cooling Tower Parts 3 Products available
  2. Cooling Tower 3 Products available
  3. Others 23 Products available

Other Products / Services #4567626

PVC Honey comb

PVC Honey Comb
PVC Honey comb double edge folded fills are used in counter flow induced draught cooling tower. The fills section is designed to bring intimate contact of water and air so as to facilitate heat and mass tranfer at the same time aiding in proper and even distribution of air and water over the cross sections, while maintaining minimum pressure drop. The fills are of honeycomb section and are vacuum formed from virgin PVC for excellent resistance to corrosion and give maximum area wettage.
View Complete Details
Ask Latest Price & Details
Flower Nozzle

Flower Nozzle

The PVC Flower nozzles are used in hot water basin to sprinkler water all over the splash bar area & operates under gravity
View Complete Details
Ask Latest Price & Details
Fan Blades

Fan Blades
Fan Blades are made up of fibre glass reinforced epoxy resins. These blades are hollow in construction and have been designed with most efficient aero foil section.
View Complete Details
Ask Latest Price & Details
Hot Water Distribution System

Hot Water Distribution System
The Hot Water Distribution System is of open Gravity type and is constructed from boiling water proof marine plywood with poly-propylene target nozzles.
View Complete Details
Ask Latest Price & Details
Corrugated asbestos cement

Corrugated Asbestos Cement
Corrugated asbestos cement board casing is applied vertically joints are lapped and sealed for water tightness. Corners are covered with FRP corner rolls. Corrugated asbestos louvers are located on wide centers on the sloping louvered walls. They are supported by tower columns and louver supports. ( FRP casing and louvers can be provide if desired.)
View Complete Details
Ask Latest Price & Details
tower casing

Tower Casing

The tower casing is made of tough fibre-glass reinforced plastic (FRP) and has sufficient structure strength to withstand high wind velocities and vibrations. UV - stabilized resin is used along with gel coat for longer life.it is resistant to local impact and even if slight damage occurs, local repairs can easily be done. The portion of casing housing fill and eliminator has a round cross section. The water collection sump, also of FRP, is leak proof and avoids water spillage.
View Complete Details
Ask Latest Price & Details
pvc fills

Pvc Fills
The fill is of rigid Polyvinyl Chloride (PVC) and is of honeycomb design with very large contact surface area. The fill splits the air and water into several streams, increasing the time of contact and also heat transfer between water and air. The fill is in modules and is packed in the tower casing without ant cutting for curves.
View Complete Details
Ask Latest Price & Details
Automatic rotary sprinkler system

Automatic Rotary Sprinkler System
Automatic rotary sprinkler system made of Aluminum alloy or cast steel material, with rotary head and sprinkler pipe distributes the hot water over the entire space of the filler. Sprinkler pipes are non-clogging, require low pressure to operate and assures uniform water flow with minimal operating pump head. The FRP eliminators attached to sprinkler pipe are specifically designed for low pressure drop and minimizes the drift loss of water.
View Complete Details
Ask Latest Price & Details
AXIAL FAN

AXIAL FAN
Specially designed energy efficient fans are of induced-draft axial type with adjustable pitch. Material chosen are non- corrosive of plastic, FRP or aluminum alloy. The high efficiency design ensures low running cost and the lowest possible noise level. Fan blade pitch is adjustable and dynamically balanced.
View Complete Details
Ask Latest Price & Details
electric motors

Electric Motors
The motors are totally enclosed (IP55), Flange type , 420 V, 3 ph, 50 Hz., induction weather proof with extended shaft and are specially designed for cooling tower application.
View Complete Details
Ask Latest Price & Details
Hot water Basin

Hot Water Basin

In cross flow induced draughtcooling tower the FRP Hot Water Basin is used to distribute the water evenly over the cross section of the tower.
View Complete Details
Ask Latest Price & Details
Splash Bars

Splash Bars

The Splash Bars section is designed to bring intimate contact of water and air so as to facilitate heat and mass tranfer at the same time aiding in proper and even distribution of air and water over the cross sections, while maintaining minimum pressure drop. The Splash Bars are of C section and perforated from virgin PVC for excellent resistance to corrosion and give maximum area wettage.
View Complete Details
Ask Latest Price & Details
aluminium fan

Aluminium Fan
The Aluminium fan is an axial flow, multiblade version with blade section and adjustable blade pitch. The fan is designed to deliver large volumes of air at low power consumption and low noise generation. The fans are dynamically balanced for smooth operation, longer bearing and more life including that of the supporting structure.
View Complete Details
Ask Latest Price & Details
FAN DRIVE MOTOR

FAN DRIVE MOTOR
The fan drive motor is in IP55 weather proof design. The fan is directly driven by the special extended shaft motor made from EN8 steel mounted facing downward on a mounting frame on the top of the Cooling Tower.
View Complete Details
Ask Latest Price & Details
Motor for Cooling Towers

Motor For Cooling Towers
The motors are totally enclosed (IP55), Flange type , 420 V, 3 ph, 50 Hz., induction weather proof with extended shaft and are specially designed for cooling tower application.
View Complete Details
Ask Latest Price & Details
6Q Yoke

6Q Yoke
6Q Yoke : This is known as flexible coupling & made up of fine grade of cast iron and being used with rubber inserts in conjunction with propeller shaft which propel the gear box & fan through electric motor .
View Complete Details
Ask Latest Price & Details
Timber Cross Flow Double Cooling Tower

Timber Cross Flow Double Cooling Tower
5 Lakh /Piece Get Latest Price
  • Relative Humidity 80%
  • Design Wet Bulb Temp 29 Degree Celsius
  • Design Wind pressure 100 MPH
  • Vibration Level 2 mm/sec
  • Noise Level 25 DB
  • Drift Losses 0.001%
  • Evaporation Losses 0.5% to 2.5%
  • Maximum Hot Temp 80 Degree Celsius
  • Maximum Range 50 Degree Celsius
  • Minimum Approach 2 Degree Celsius
  • Features Easy to fit, Highly durable, Flawless finish

Specification 

Model No. Width at Fan Deck Level Width at Basin Level Length Height at Fan Cylinder Fan Die
WSF 011 156 134 104 96 60
WSF 021 160 136 104 96 60
WSF 031 156 126 104 120 60
WSF 041 168 138 104 120 60
WSF 051 180 150 104 120 60
WSF 061 168 146 152 98 72
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Laxmikant Chaturvedi (Wetpoint Aqua Equipments Private Limited)
  • Survey No. 736, Morena LInk Road, Ganga Malanpur, Gwalior, Madhya Pradesh - 474010
  • Share us via
    Linkedin pinterest
View Contact No.