Other Products / Services #1908940

These plates are used between the Outer Heads & cylinders of compressors. The valves are placed on these plates to maintain the air pressure in compressor as well as receiver tank. These are very helpful in maintaining the air pressure by supporting the air cycle between valves and air galleries.

The complete load of compressors is maintained by the crank shafts. These are one of the very important & major parts of the compressor. These are the base of compressor which are specially made to work in highly loaded & continues running conditions. These are of specially design to maintain the oil splash as well as lubrication system of the compressor.

A well known Crank Cases supplying company.

We manufacture screw compressor spares of international quality under state-of-the-art conditions. These spares are engineered to give the best operating efficiency with minimum horse power.Product Specification Equipped with modern facilities, our workshop caters to the requirements of changing Bearings Seized Air ends in a very short span of time with full guarantee of performance. Saves problems of sending screw compressor to manufacturers Works for Estimation and then servicing. This results in considerable loss of time and money. Our service saves customer's time, money and loss of production.

The Valve plates are the base of any valve (inlet deliver). These plates are specially made up of hardening material to avoid the chances of valve passing in any circumstances. The maximum load of the compressor is on the valves and indirectly this load is being maintained by Valve Plates Plate Seats

The complete load of compressors is maintained by the crank shafts. These are one of the very important & major parts of the compressor. These are the base of compressor which are specially made to work in highly loaded & continues running conditions. These are of specially design to maintain the oil splash as well as lubrication system of the compressor.

Compressed air before delivering it to the processed area. These are specially designedProduce the maximum cooling with the help of Air Cooling. The same can also be delivered made as per your requirement application

The Air Filters are used to filter the atmospheric air before it appeals to the compressor & rescues valve. These filters are made up of special quality material to give it& rescues best life supporting the inlet valves in taking the air from atmosphere

The pistons are one of the major functioning spares of compressor. The function of these pistons is to complete the cycle of valves in their intake as well as delivery with the support of piston & rider rings. The working of pistons & rings take place in cylinders to produce the compressed air gas

The Intercoolers & after coolers are used to decrease the temperature of compressed air before delivering it to the processed area. These are specially designed and tested in all the working conditions to produce the maximum cooling with the help of cold water. The same can also be delivered made as per your requirement application

These Connecting rods are used to align the pistons direction to avoid the breakdown damage chances. One of the main objective of these rods is to prevent the piston rings by directing the piston in a proper aligned way resulting in less load at pistons as well as rings and all other spares.

The Piston rods are used to make a completion of the stroke of compressor. These rods are fixed with the pistons and the gland packing cases, seals & Oil Wiper Rings are also placed on such rods to maintain the air gas pressure up to its extent. These rods are made up of special material with proper alignment to maintain the air gas pressure up to the gland packing areas.

The Main Bearing Housings are the basic support of crank shaft which helps in the completion of oil pressure cycle. The oil pump is also located in these housings to produce the proper oil pressure in crank case body areas, connecting rod areas as well as cross head areas. These are also specially designed to run in maximum loaded conditions as the complete load of the compressor is maintained by crank shaft & the shaft is supported by these housings.

These gland packing seals are used to maintain the compressed air gas pressure up to gland packing areas only. Generally these are placed in gland packing cases installed at piston rods. These are specially made of high quality material for continues running in high temperature conditions also. The Oil Wiper rings are used to maintain the oil pressure up to its extent only. These rings are very helpful in stopping the spreading of oil in the compressor. These are specially designed to stop the oil in limited areas helping the production of 100% non

These gaskets are specially made for the compressors purpose to avoid the leakage of air as well as water from the compressors air gas water jackets. These gaskets are particularly made for the continues running of compressors in very rough conditions such as high temperature, continues loaded position etc.

We are dealing best Flywheels supplying company.

Compressed Air Receivers Pressure vessel plays very important role in compressed air system with multi purposes by value of its design & rightly selected. Compressed Air Receivers also enhance the service life of Compressor.Purpose Stores the pressurised compressed airHelps to maintain constant pressure at downstreamCools the compressed airVertical Air Receivers helps to separate oil & moisture from compressed airTo allow compressor have optimum level of rest Types Vertical Air ReceiversHorizontal Air Receivers