Bhavnagar, Gujarat, India
Our Products
Additional Information:
Packaging Details : export quality wooden packing
Delivery Time : 10 days
Plate heat exchangers or plate heat conductors serve to exchange and conduct thermal energy from one element to another. That is why they are used predominantly in heating, refrigeration and air conditioning systems. This catalogue lists spare parts for plate heat exchangers.
Sealed models are bolted together and plates can thus be quickly and easily replaced. They are sealed with rubber seals between the two plates. These are vulnerable to aggressive media such as ammonia. For this reason welded or soldered plate heat exchangers are used instead. These can however only be replaced completely or in modules (cassettes).
In our selection you will find suitable spare parts for every design of heat exchanger.
Plate Heat Exchanger Advantages
You simply remove the tie bolts and slide back the movable frame. The plate pack can then be inspected, pressure cleaned, or removed for refurbishment if necessary.
A significant benefit of the plate heat exchanger is that it is expandable, allowing anincrease in heat transfer capability.As your heat transfer requirements change, you cansimply addplates instead of buying an entire new frame unit, saving time and money.
The pressed plate patterns and narrow gaps allow forvery high turbulence at relativelylow fluid velocity. Combined with counter directional flow results in very high heat transfer coefficients.
The same features that give the plate heat exchanger its high efficiency also makes it possible to reach close approach temperatures which is particularly important in heat recovery and regeneration applications. Approach temperatures of 1F are possible.
The plate heat exchanger can be built in sections, separated with simple divider plates or more complicated divider frames with additional connections. This makes it possible to heat, regenerate, and cool a fluid in one heat exchanger or heat or cool multiple fluids with the same cooling or heating source.
Each medium is individually gasketed and as the space between the gaskets is vented to the atmosphere, cross contamination of fluids is eliminated.
Very high turbulence is achieved as a result of the pattern of the plates, the many contact points, and the narrow gap between the plates. This combined with the smooth plate surface reduces fouling considerably compared to other types of heat exchangers.
High heat transfer coefficients mean less heat transfer area and smaller heat exchangers, and sometimes even less heat exchangers. This and less space requirements, reduced flow rates, and smaller pumps means.
| HEAT EXCHANGER GASKETS | |
|---|---|
| Frame Types: | Clip and some Glue type |
| Gasket Material: | NBR |
| NBRP | |
| HNBR High Temperature | |
| EPDM | |
| EPDMP | |
| Viton (FKMG, FKMT, FKMB) | |
| Other material available on request |
|
| HEAT TRANSFER PLATES | |
|---|---|
| Chevron Pattern: | Most plate models available in two patterns – high and low theta |
| Plate Material: | 304 Stainless Steel |
| 316 Stainless Steel | |
| Titanium | |
| SMO | |
Compressors are used to compress gases. On board a shipand power plants compressors are the auxiliary units that assist smooth operation of a ship as well as effective process and production flows.Various compressors are used depending on volume flow and pressure.
Originally compressors were almost exclusively liquid-lubricated usually with oil, and more rarely with water. This has two disadvantages: The lubricant has to be changed regularly, and the compressors must therefore be built in such a way that they can be maintained without difficulty.
Economic Spare Parts with reliable quality
The demands on the quality of the compressor spare parts are particularly intense. We supply only high-quality and reliable compressor spare parts to avoid a cost-intensive failure of your compressors.
We will offer you the required spare parts for your compressors without delay and at low prices. Whether you need air intake filters, seals, O-rings, safety valves or release valves for your compressor our spare parts portfolio is practically gapless.
We at Y.A. Marine specialize in main components of engines, 2-Stroke and 4-Stroke, Slow speed and Medium speed engines, in major important heavy parts of various makes and models.
As the main unit they provide propulsion for the ship. As auxiliary units diesel engines are used for power generation on board, but also in industry for the power supply of stationary plants. The requirements on the reliability and operating security of diesel engines are particularly high.
We specialise in high-quality diesel engine spare parts as follows:
MOST KNOWN MAKES AND MODELS
MAN-B&W, Daihatsu, Yanmar, Bergen, Niigata, Himse
On ships separators as auxiliary units ensure smooth operation of the ship through, among other things, treatment and conditioning of fuel contaminated by water and dirt particles.
On ships separators as auxiliary units ensure smooth operation of the ship through, among other things, treatment and conditioning of fuel contaminated by water and dirt particles. To guard against wear and tear in engine components and resulting losses of performance or breakdowns, separators on ships as well as in industrial plants likewise keep lubricating oil free of water and other contaminants.
The liquids and particles of greater density are pressed by centrifugal force against the drum wall of the separator and separated out.
Some types of centrifugal separators are chamber separators (with ring-shaped fittings called chambers) and bowl separators (with conical bowls which offer more surface area for collecting solid substances).
Because of the strong forces acting on the inside of the separator during the separation process, the requirement on the excellent quality of the spare parts is particularly high.
Spares for Separators
We at Y.A. Marine can provide wide range of spare parts for separators of different functional principles.For a separator to be able to separate the substances in a mixture, these must be of different densities. In the separation of dirt particles and fuel the particles have a greater density than the liquid fuel and can therefore be easily separated by centrifugal force.
For all types of Separators:
Whether you are usingsolid bowl separators or bowl separators we will procure you the suitable spare parts for separators in excellent quality at economic prices.
Pumps serve to convey various media such as seawater, oil or fuel. They are used in nearly all industrial plants as well as on board ships.
Rotary pumps or centrifugal pumps on the other hand are deployed when high flow volumes are to be conveyed. The continuous flow of the medium to be pumped permits a smooth process run.
Pumps must withstand extreme conditions on ships and in industrial plants. Damage to pumps leads to cost-intensive plant shutdowns and production stops which should be avoided at all costs.
Spares for Pumps
We can provide spares for pump for all types of equipment.
We are the main supplier of this product.
Spares for Fuel Injection:
Contact us for new needles and plungers, reconditioned fuel injection pumps and pump elements of European make for all makes of Diesel Engine.
Additional Information:
Packaging Details : export quality wooden packing
Delivery Time : 10 days
