Yantai Xinhai Mining Machinery Co., Ltd

shandong, China

We are offering flocculate feeder. Introductionflocculate feeder is a screw feeder specially designed for adding the flocculent into high efficiency thickener, which is made of stainless steel, with the features like corrosion resistance and convenient operation. featuresput flocculant to the helical conveyor, send materials by the spiral device. flocculant and water mixed up by high-speed injection, make it into flocculant liquid without massive. flocculant can be linear-adjusted from zero. the whole device is made of stainless steel, durable and long service life. applicationflocculating agent feeder is widely used for reagent dosing in water supply, sewage treatment system, and electric industryworking principle the flocculent is fed into the spiral conveyor, and then be sent to the injector by the screw. The flocculent will be fully mixed with the water in the injector. technical parameters model specification model motor power(kw) weight(kg) notexnj-15 110sz52 0.185 160 patent producthttp:www.ytxinhai.comenhttp:www.xinhaimining.comen

We offer Zinc Powder Feeder. Introductionthe machine is used to continuously and uniformly feed zinc powders to mixing bucket filled with pregnant solution. The disc diameter is approximately 140170mm and the disc revolving speed is about 1rmin. featuresspeeding timing motor being used, the feeding rate of zinc powder may be conveniently adjusted. the spiral feeder keeps the feeding smooth and continuous, which solves the difficulty and problem in feeding rate adjustment and uneven feeding of traditional mechanical zinc powder feeder. Residual zinc powder is reduced, production cost is lowered down, smelting effect improved. Less zinc is exposed to the open air, oxidation of the zinc powder during the operation is reduced, improving transposing effect. applicationduring the gold cyaniding recovery process, the machine is used to continuously and uniformly feed zinc powders to mixing bucket filled with pregnant solution. Except for the previous application, it is also applicable to beneficiation, chemicals, pharmacy and food sectors. working principle the zinc powder addition can be adjusted in accordance with the processing capacity and the gold grade of solution. Via the transition of v-belt and secondary turbine reducer, motor drives disc to rotate. Zinc powders in bucket fall on disc due to gravity and are scraped to discharge opening by scraper. technical parametersmodel d of disc(mm) rotating speed of disc(r.p.m) feed particle size (mm) feeding rate(kgh) motor model motor power(kw) weight (kg)140 140 1.13 02 1.52.4 y801-4 0.55 65170 170 18.5 1.53.6 76

We are offering electro-magnetic vibrating feeders etc. Introductionelectro-magnetic vibrating feeders provide the most efficient and economical method of conveying bulk materials. featuresvibrating feeders consist of vibrating tray fitted to a power unit of considerable weight. the electromagnetic unit is mounted inside the heavy power unit. Applicationvibrating feeders are extensively used in iron and steel works, collieries quarries, gas works, mines, chemicals, pharmaceuticals, ceramics, rubber, clay and glass industries for handling all types of materials. Working principle the electromagnetic vibrating feeder utilizes electromagnetic vibrating device to drive minerals to reciprocate in the direction of dip. When the vertical component of accelerated speed of feeder exceeds accelerated speed, minerals are tossed upward and leap forward in parabolic fashion. It takes 15 second to finish the rising and falling. The chute vibrates for one time and subsequently the minerals are tossed for one time. The chute vibrate at a frequency 3000minute. Correspondingly, minerals are tossed upward and leap forward. So minerals can continuously and uniformly move forward and feeding is achieved. Technical parametersmodel tank dimensions(mm)lwh feed particle size(mm) horizontal feed rate(th) -10feed rate(th) power(kw) external dimensions(mm)lwh weight(kg)gz 600200100 50 5 7 0.06 910376485 80gz 800300120 10 14 0.15 1175608600 165.5gz 900400150 75 25 35 0.2 1325578675 223gz 1100500200 100 50 70 0.45 1616762814 462gz 1200700250 150 100 140 0.65 1815840980 631gz 1600900250 200 150 210 1.5 2410109251500 1140gz 18001100250 250 250 350 3 280013301710 2017gz 22001300300 300 400 580 4 330215561995 2985gz 24001500300 350 600 840 5.5 351517762200 3549gz 25001800375 500 750 1050 42 363025002235 6491gz 28002000375 1000 1400 5.52 406026402919 7680gz 30002200400 1200 15 526028602563 8840gz 32002500450 1300 639430402864 9920gz 35002500450 550 1500 18.5 747538023000 11000

We are offering chute feeder.introductionthe chute feeder can be installed on the ground or hoisted on the discharge port of ore bin. The chute bottom plates do the reciprocating movement. featuresstroke can be adjusted by the eccentric wheel; the eccentric throw is half as big as the stroke. According to experience of some mine sites, the eccentric throw should be no less than 30mm for cohesive ore. The chute width is 2-2.5 times bigger than the maximum feeding granularity. The biggest chute feeder can supply ore with granularity less than 500mm. applicationthe chute feeder is used to convey mineral lump from storage silo to equipment in industries like smelting, mining, chemical, building material, concentrating and coal, etc. working principle the machine is usually installed underneath the discharging opening of ore bin. Minerals fall on the bushing. The bushing is located at the chute bottom, configured on idler wheel and via eccentric device connected with reducer which is linked to electric motor by coupler. When it works, electric motor drives reducer via coupler; eccentric disk and drain cap which is situated between chute frame bottom and roller begin to do reciprocal and linear motion so as to uniformly feed minerals. technical parametersmodel outlet dimensionswh(mm) max feed particle size(mm) feed capacity(t/h) motor model motor power(kw) weight(kg)cg300300 300300 50 10--20 y90l- 4 1. 5 265cg400400 400400 100 10--30 y112m- 6 2. 2 535cg600500 600500 200 10--50 y112m- 4 4 1045cg700500 700500 250 10--60 1100cg1240980 1240980 350 36--90 y160m- 6 7. 5 1710http://www.ytxinhai.com/en/http://www.xinhaimining.com/en/

We are offering swaying feeders etc. Introductionswaying feeder is a kind of feeding machine that is able to deliver blocky and granular materials from storage silo to receiving device evenly, regularly and continuously in the production process. features1. Steady vibration, safe operation, durable life;2. Flux can be changed and controlled;3. The machine can be adjusted steadily, low noise, low electricity consumption;applicationthis swaying feeder, an auxiliary equipment for conveying machines, is installed beneath hopper or attached to steel structure in concentrating plant, smelting plant, cement plant, sand mining or mechanical casting workshop. Working principle the machine is installed beneath the discharging opening of ore bin. Minerals fall in the ore feeding box from ore bin. When it works, via coupler, electric motor drive turbine reducer to operate; the pendulum plate of chute begin the reciprocal movement through eccentric wheel on the output shaft of turbine reducer. So, the mineral feeding process is finished. The mineral feeding quantity can be controlled by adjusting eccentric wheel or regulating the revolving speed of motor. Technical parametersmodel inletdimensionswh(mm) outletdimensionswh(mm) strokeofeccentricwheel(mm) frequency(rmin) maxfeedparticlesize(mm) feedcapacity(th) motormodel motorpower(kw) rotatingspeedofthemotor(rmin) weight(kg)bg250250 250250 25030-115 0-90 46 25 4.5 y8ol-4 0.55 1390 130bg300300 300300 30030-125 30 6.5 y80s-4 0.75 1390 272gb400400 400400 40050-130 0-170 35 12 y90s-4 1.1 1400 558gb600600 600600 60050-150 0-200 50 25 y90l-4 1.5 1400 613

We are offering plate feeder.introductiontransporting raw material to the crushing plant, where their combination of reliability and robustness have proven to give many years of trouble free operation with minimal maintenance. featuresplate feeder is noted for its smooth reciprocating action providing a uniform feed rate. The feed rate is varied by changing the eccentric throw on select models. applicationplate feeder is ideal for sand, gravel, and recycle applications or in portable plants where the rugged durability of the feeder aides in the crusher discharge. The universal engineering reciprocating plate feeder is built in a range of sizes and types for shovel or dragline loading, ramp loading, or bulldozing to trap. It is available in varying widths and lengths to fit your specific application. working principle the working process is divided into two parts: firstly, the dynamic is produced by motor and transited to connecting rod and ratchet wheel by reducer. Secondly, the dynamic prompts the connecting rod of eccentric device to reciprocate. The dynamic also prompts pawl and ratchet wheel to make driving sprocket rotate so that link plate intermittently moves. As a result, minerals are conveyed. technical parametersmodel chain plate feeding particle size(mm) productioncapacity(m3/h) motor weight(kg)width(mm) center distance of sprocket(mm) speed(m/s) model power gbz120-4.5 1200 4500 0.05 500 100 y160l-4 15 31279gbz120-5 5000 33427gbz120-5.6 5600 34321gbz120-6 6000 35900gbz120-8 8000 y180l-4 22 41342gbz120-8.7 8700 43164gbz120-10 10000 46962gbz120-12 12000 51844gbz120-15 15000 y200l-4 30 62157gbz150-4 1500 4000 600 150 y160l-4 15 33197gbz150-6 6000 y180l-4 22 39257gbz150-7 7000 43352gbz150-8 8000 45962gbz150-9 9000 y200l-4 30 50522gbz150-12 12000 y225m-4 45 59915gbz180-8 1800 8000 800 240 y225m-4 45 51360gbz180-9.5 9500 57397gbz180-10 10000 59632gbz180-12 12000 66029gbz240-4 2400 4000 1000 400 y200l-4 30 44780gbz240-5 5000 50737gbz240-5.6 5600 52447gbz240-10 10000 y225m-4 45 76373gbz240-12 12000 85331http://www.ytxinhai.com/en/http://www.xinhaimining.com/en/

We are offering disk feeder etc. Introductiondisc feeder is the volumetric measuring feeding equipment. featuresthe disc feeder can feed the materials to the every working procedure evenly and continuously. The disc feeder is applied to feed all kinds of non-adhesive materials, and it doesn't applied to good flow properties powder materials. Applicationthis swaying feeder, an auxiliary equipment for conveying machines, is installed beneath hopper or attached to steel structure in concentrating plant, smelting plant, cement plant, sand mining or mechanical casting workshop. Working principle this machine is mainly composed of motor, decelerator, disc, scraper and feeding adjustment devices etc. The disc rotates through the triangle belt, worm reducer, and vertical shaft by the motor. Lower part of the disc set connected with the worm gear reducer, and the upper part connected with steel column of tank by the feed chute. Motor is fixed on the side of the disc set. So the whole disc feeder is under the feed chute. Technical parameterstype model diameter of the disk(mm) rotating speed of the disk(r/min) max feed particle size(mm) feed capacity(t/h) motor model motor power(kw) weight(kg)closedhanged yg300 300 10. 0 20 0- 1. 8 y80l- 4 0. 55 115yg400 400 10. 7 0- 2. 6 y90l- 6 1. 1 120yg500 500 0- 3. 3 124yg600 600 10. 0 0- 5. 0 130yg800 800 9 30 0- 8. 0 195yg1000 1000 9 30 0- 12 y90l- 4 1. 5 263yg1500 1500 7 40 0- 22 y132m2-6 5. 5 755openhanged dk600 600 7. 53 25 1. 8- 3. 9 y90l- 6 1. 1 410dk800 800 7. 53 30 3. 5- 7. 6 600dk1000 1000 7. 50 40 1.8- 16.7 y100l- 6 1. 5 800dk1300 1300 6. 5 50 4. 3-27. 9 y132s- 6 3 1110dk1600 1600 6 60 7.03-48.6 y132m1- 6 4 1980dk1800 1800 5 70 9.26-60 y132m2- 6 5.5 3070dk2000 2000 80 13.6-88.4 y132m2- 6 3260