Mixed Bed Unit

Listing ID #1360504

We are among the prime manufacturers and suppliers of Mixed Bed Unit. Mixed Bed Unit is designed to produce high purity treated water required by power plant, electronic industries, pharmaceuticals etc.
A mixed bed polishing unit contains strong acid Cation (SAC) resin and strong base Anion (SBA) resins combined to a ratio of approximately 40% Cation resin to 60% Anion resin. (All resin volumes are dependant upon the incoming water analysis and the required quantity of treated water). Mixed bed polishers are typically installed when a water quality of less than 1 micro ohm conductivity is required.
This process differs essentially from the separate bed system in that the two strong resins, the Cation and the Anion, are joined in a single vessel. The two resins are intimately mixed by agitation with compresses air. The grains of resin are thus arranged side by side, and the whole bed behaves like an infinite number of Anion and Cation exchangers in series. Mixed bed unit is designed to produce high purity treated water required by power plant, electronic industries, pharmaceuticals etc.
Mixed Bed unit is a single unit consisting of strong acid cation and strong base anion mixed together evenly. The permeate water produced from DM plant / RO plant having low TDS which are further reduced to high purity using Mixed Bed unit. Mixed bed unit works like infinite demineralization system in single column unit.