Our Products
. This vice is the earliest vice that can be vertical or on either side.
. Enhanced body stucture reduces the deflection in opration while the vice mounted vertical or horizontal.
. 80000 PSI ductile iron body.
. Sealed bearing system reduces clamping pressure and increases bearing life.
. Accuracy in parallelism & squareness with in 0.02/100mm.
. Hardened bed and jaws maintain accuracy for long time.
. No work piece tilt after clamping.
. All parts interchangeable and available as spares.
. Tenon and tenon slots provided for effortless truing of vice on machine table.
. High clamping force can be achive by effortless handle movement wich eliminates hammering on handle.
model | Jaw width in mm | Max opening with standard jaw position | Max jaw opening with jaw reversed | Jaw depth in mm | Overall lenth in mm | Overall height in mm | Nett weight in kgs |
cmv 150 | 152 | 150 | 380 | 44.5 | 455 | 117 | 31 |
These straight edges are widely used for checking straightness and marking purposes. Steel straight edges are made using high quality steel and are available in hardened and unhardened form. Our steel straight edges are hand scrapped or lapped to achieve the desired accuracy as per standards. Light in weight, design of these straight edges make them ideal to use in various industries such as Glass, Fabrication and windmill. The Engineers steel straight edges of bigger size are provided with milling slots to reduce weight. Our Steel Straight edges are supplied with computerized calibration certificate traceable to National Physical Laboratory (NPL, Govt Of India ) New Delhi.
Standard sizes and accuracy of nicon Engineers Steel Straight Edges as per IS:2220-1990, Grade-1
Dimensions |
Straightness Microns |
Parallelism Microns |
300 x 35 x 8 |
12 |
24 |
450 x 35 x 8 |
12 |
24 |
600 x 50 x 8 |
15 |
30 |
1000x 50 x 8 |
21 |
42 |
1200 x 55 x 10 |
25 |
50 |
1500 x 65 x 12 |
29 |
58 |
2000 x 65 x 12 |
37 |
74 |
2500 x 65 x 12 |
46 |
92 |
3000 x 85 x 18 |
54 |
108 |
4000 x 100 x 20 |
71 |
142 |
5000 x 100 x 20 |
87 |
174 |
6000 x 120 x 20 |
100 |
200 |
Sizes Available
100mm, 125mm, 150mm, 200mm.
Designed for maximum strength and rigidity
Useful for holding smll parts together for drilling, tapping ect
Made from steel with hardened, ground jaws
Very high holding strength
Discriptions These clamps are extremely useful for work holding when drilling, tapping or other machiningoperations. Made from hardened, ground steel with parallel adjusting screws. The ends of thejaws are bevelled to allow clamping under shoulders or in recesses. No end of uses for both metal and woodworking crafts.
SIZE IN MM | SIZE IN INCHES |
50 | 2 |
75 | 3 |
100 | 4 |
125 | 5 |
150 | 6 |
200 | 8 |
A wheel dresser removes the buildup of crud on the grinding surface, exposing new grains for better cutting performance.
You can also use it to square the face of the wheel when it isnt running true.
The cast iron handle offers more stabilizing mass for better control.
Size |
Dresser Lenth in mm |
Cutter Diameter in mm |
0 |
255 |
32 |
1 |
270 |
38 |
2 |
320 |
60 |
Manufactured from selected steel, these boring bars are accurately machined.
Bars incorporate broached holes that accept standard high speed steel or carbide toolbits conveniently
Double Ended one piece boring bar have 90 & 45 square ends.
They are supplied with Allen key and Screw but without tool bits.
BORING BAR LENTH IN MM |
BORING BAR DIAMETER IN MM |
SQUARE HOLDER LENTH IN MM |
SQUARE HOLDER SIZE IN MM |
TOOL BIT SIZE IN INCH |
114 |
9.52 |
63 |
12.7 |
1/8 |
133 |
11.11 |
63 |
15.8 |
3/16 |
171 |
14.28 |
76 |
19 |
1/4 |
235 |
19 |
95 |
25 |
5/16 |
292 |
22.22 |
114 |
32 |
3/8 |
368 |
31.75 |
133 |
38 |
1/2 |
These reamers are ideal for use on steel or nonferrous metals The reamer blades are made from High Speed Steel, accurately hardened and relief ground
Reamers expand by loosening one adjusting nut and tightening the other
USING OF REAMERS
|
TYPE | RANGE IN MM |
H1 | 9.5-10.3 |
H2 | 10.3-11.11 |
H3 | 11.11-11.9 |
H4 | 11.9-13.5 |
H5 | 13.5-15 |
H6 | 15-16.6 |
H7 | 16.6-18.25 |
H8 | 18.25-19.8 |
H9 | 19.8-21.4 |
H10 | 21.4-23.8 |
H11 | 23.8-26.98 |
H12 | 26.98-30.16 |
H13 | 30.16-34.1 |
H14 | 34.1-38.1 |
H15 | 38.1-46 |
H16 | 46-56.3 |
FEATURES
Sturdy and accurately made machine vice from graded cast iron
Fine acme thread screw
Jaws are made of special steel properly hardened, fixed jaw is provided with vertical and horizontal 'V' groove to hold the round job firmly
The swivel base is graduated fully through 360o
Vice can be converted from swivel base to fix by removing the base
Quick alignment to machines through longitudinal slot provided in base.
Crank handle is made ofunbreakable ducktile ironsteel providing loaded mechanism providing positive grip.
size | width of jaws | opening of jaws | depth of jaws | swivel range | hight aprox | weight aprox |
100mm | 100mm | 100mm | 38mm | 360o | 120 | 14kg |
125mm | 125mm | 125mm | 46mm | 360o | 140 | 26kg |
150mm | 150mm | 150mm | 48mm | 360o | 170 | 37kg |
SIZE | WIDTH OF JAWS | OPENING OF JAWS | WEIGHT(APROX) |
6" | 150MM | 175MM | 5KG |
7" | 175MM | 200MM | 9KG |
8" | 200MM | 225MM | 11KG |
9" | 225MM | 250MM | 15KG |
Made from selected carbon steel, these Drift keys are accurately hardened for increased resistance to wear Used for conveniently removing taper shank drills and remers from sleeves and sockets, these are blackened and have a premium shot blast finish with permanent marking of size for easy identification.
Sizes AvailableMT-1, MT-2, MT-3, MT-4, MT-5, MT-6.These cast iron surface plates provide an accurate reference plane for precision gauging, inspection and tooling setup.We make use of good quality closed grain cast iron .The meticulous manufacturing processes that are carried out at our premise makes these cast iron plates apt for machine shops, quality control and standard rooms. Our precision cast iron surface plates are utilized in the applications, where strict accuracy required hence, these plates are appropriate for high precision work and are ideal for blue matching.
SIZE LXB IN MM | SIZE LXB IN INCHES |
300X300 | 12X12 |
300X450 | 12X18 |
450X450 | 18X18 |
500X500 | 20X20 |
600X600 | 24X24 |