Polyurethane Liquid Waterproofing Membrane, for Construction Use, Feature : Long Life

Listing ID #4934615

Uses

• For waterproofing of:
• New roofs.
• Balconies, terraces, parking garages, asbestos and concrete roofs.
• Industrial washrooms & shower
• Water reservoirs and swimming pools.
• Foundations, cellar walls, retaining walls, bridges abutments.
• Refurbishing of old waterproofing system including torch-on membrane.
• Facade damp proofing.
• Water proofing/Curing membrane and protective coating for sub structure.

Features

• Single component and cold applied.
• ZC- ELASTOFALT has excellent UV resistance and long term ageing stability.
• Cured membranes from ZC- ELASTOFALT remain highly flexible even at extremes of temperatures (-25°C to 120°C).
• Excellent vapour barrier.
• Easy to use.
• Non-flammable and Non-toxic
• Environment friendly.
• Resistant to chlorides and sulphates commonly present in the soil.
• Compatible with cementatious tiling adhesive.

Surface Preparation

All surfaces should be sound, clean and free of contaminants. Absorbent surfaces e.g. concrete should preferably be dampened with water. In kitchens, toilets and other wet areas all the openings should be properly sealed. On all weak points such as cracks or around the pipes use a woven fibre glass mesh as reinforcement between the two coats of ZC- ELASTOFALT

Application

ZC- ELASTOFALT can be applied by brush, roller or squeegee. Hot, dry or very porous substrate should be dampened with clean water prior to application of ZC- ELASTOFALT. When two or more coats are required, ensure that the preceding coat is fully dry before applying the successive coat, which should b e applied at right angle to proceeding coat. ZC- ELASTOFALT also acts as a non-degradable curing membrane; hence it may be applied immediately after the removal of mould, to the concrete structure, which has no aesthetic value such as the sub structure of the building.